The crown gear design is subject to high wear. I just repaired a friend's E58 clone that had significant wear on the motor gear after only a handful of flights. I recommend being generous on putting waterproof grease on the nylon motor gears. Fortunately you can get replacement motors with gear mounted for less that $3 each. Happy flying!
Doggeslife - where did you see the motors and gears at that price? Love your screen name! The lady that talks inside my phone said IS life, instead of ‘s life .
Or make a small hole in the tip of the drone arm so that you can spray silicon lube into and lube the gears before every flight. Also why not just buy whole cheap E88 drone for $10 or less and use it for spare parts?
Awesome video, but when I looked at your channel you haven’t put out a new video for a year. I’m so disappointed, it’s hard to find excellent channels like yours. You do have a bunch of episodes that I’m sure I will watch frequently! RUclips needs more channels with smart information like this one! Thanks
Tellos motherboard is roughly the same size if not the same size of some of these cheap WiFi drones I’ve seen is it possible to take the motherboard from the Tello and put it inside one of the larger cheaper Wi-Fi drones and connect everything together and make it operational ?
Thanks for this great video but wondering if you might explain how the camera/Wifi module is removed. On my e58 the antenna, unfortunately, is soldered to this board unlike in your e58 where they've used a u.fl connector.
Great informative video. Only flew mine a few minutes and the gears stripped in one arm. I will replace that. However, my camera image is upside down. Can it be flipped?
Thanks a lot for the video. My drone is the same model and the right forearm started shaking. Especially when the right front propeller is running. I changed the propeller but it still vibrating. Do you think it can be fixed?
Hi How to DIY Rc ,,nice video detalled, I seeing with detalles your video, you tray put oFF the WiFI board at final 13,44min after removing the rubber plate, no screw but it has a black locking tab between the two screw cylinders, which should be to open a bit and release the WIFI card upwards. must have another black locking tab on the other side, to release too. The camara just must slide to inside and out with wifi plate. isn't it ??
This could be your problem: In my E58, the SD card slot was displaced, so the card could not be inserted. I found the SD card holder PCB inside was loose. So the entire thing had to be taken apart. There was nothing to hold down the back end of the PCB, so it would not stay in line with the slot in the outer casing. I glued a tiny piece of plastic above the back end of the PCB to hold it down in place. Now it stays there, and I can correctly insert the SD card.
hello, great hack :) since you know electronics I have one question I have eachine e58 drone without controller, i use my phone and it is noooot good!!! I bought e88 model which has controller, it says it is 2.4 ghz and I thought maybe I could use it on e58 drone since they use the same one with 2.4ghz, but it does not connect. Do you have nay thoughts on how to resolve this? Thank you
they use different code to speak between the transmitter and drone thats why they dont connect sorry dude you can by a hobby grade transmitter that have the abbility to speak 20different codes and check if yours drone code is one of them
my friends have it and i get many questions about it and the e58 and e88 are very simmeler on the inside and you can make the same upgrades and antenna mods i did to the e58 check my other vids :D
Hi, I need to replace the white plastic cover at the back of the drone. I can't seem to find that piece to replace anywhere. Thank you for this video, its very helpful to replace the top and bottom shell.
thanks for the great video. I just bought this drone and from the beginning the wifi doesnt work. If I was to attempt replacing the wifi module it would be the part under the sticky tape? also whats the part to order? wifi module? thanks for any help.
we always like to do an in-depth inspection with the review but that makes the vid way long there for we split the review up in 3 or 4 vids because e58 got so many options and cool functions thanks for the support :D
I put the battery in upside down, and tried to disassemble the copter to pop the battery out. I got 5 of the 6 bottom screws out, but one in the middle stripped. I was able to get the battery out using a toothpick to push it out, but 2 little washers popped out like what happened in your video at 4:53. Any suggestions to get the stripped screw out? Or should I not bother and no worry about the washers?
those washer a rubber o rings that dampens vibration to the flight controller and make it fly better but you don't have to use them and the e5 will still fly :D
Thanks! Thought so. I had a decent flight without them yesterday despite the wind. Video files failed to save on the e58, not sure what that was about but otherwise a success!
Hi, I just got My new sky drone it’s look the same as Eachine E58. I accidentally crushed it against the door and the forward propeller is not working anymore. Just want to ask some advice from you, since I watched this video ( nice video) and it looks helpful to see what’s the inside of the drone. My drone propeller blades is intact. My suspicion is the motor or the connections? Can you help please? This is My first drone and I want to fix it.
Oh no! Skye scammed you i'm so sorry they even abuse my review video in their advertisement grrr your drone is the eachine e58 and cost only 26 to 36 euro depending on camera quality in my description below the vid you find links all the spare parts one of them is a complete arm with motor and prop its a simple job plug and play only luck you have is that from this toy drone every parts is sold as a spare part and that's very rare for toy drones wish you good luck and just follow the links
Geat video. First question: the button to land does not work if at the beginning he desperate with the takeoff button. I only work the landing button at the start that the desperate with the right / left control. Thanks for your help. Second question: when I start engines, the left rear propeller does not work, but it works when it starts. It is normal?
I would like to compliment you with this video, it's clear and simple! P.s. The motors are sold seperately, you can buy them for about $5 a piece, or as set for $10 from any big online seller/consumer site. And yes, that is almost as cheap as a complete arm but i'm just mentioning it... ;-)
Hey Thanks for the awesome video! I want to know if there is a way I can get a replacement motor or arm from the company itself and if not where can I get a new one?
Hi, Very informative video. Thanks for sharing it. Can you make a similar video on the battery of e58. Unfortunately I live in a country where I can't get the battery or a drone shipped from Banggood and I was wondering if I can make one with all the spares on the site. I have ordered all the parts except for a battery . . So once I have assembled all the parts i will need a battery to start the drone. Do let me know your thoughts as well. Thanks
that's a very good question Sir and we got the same problem with lipo battery's not being delivered except for the one's that comes with the toy itself but you can modify the new 3.7v AA rechargeable battery to upgrade the E58 up to 6000Mah only one problem is the battery connector of the drone is weird for a 1s lipo and need some modifications!
How To DIY Rc thank you so much for such a prompt response. Yes, what I could understand from the pics and your video is that the connector is a 3 pin connector and have been trying to figure out why would they have 3 pin for a 1s battery. Now without the original battery, is there any way to connect a 1s battery ? May be solder a wire from positive and one from negative on the receiver board . .
haha ye I wish to make it shorter its way too long even for my taste but the drone is built so good for a toy i'm really impressed and with the supply of spare parts is very nice
Nice video tutorial sir. Sir i have question..my drone suddenly fell .then my camera not focus..blur picture did you have solution for come back normali focus
My e*58 won’t pair with controller or iPhone any more since it crashed , I could not put in a micro sd card nor spring eject it either. Since it wasn’t flying right I opened it up to check and see all wires were tight. and there is no slot for camera. Forget the camera . Put it back together and won’t pair. Can you suggest a purchase or other help ? New board ? Thanks Rich
This is probably your camera problem: In my E58, the SD card slot was displaced, so the card could not be inserted. I found the SD card holder PCB inside was loose. So the entire thing had to be taken apart. There was nothing to hold down the back end of the PCB, so it would not stay in line with the slot in the outer casing. I glued a tiny piece of plastic above the back end of the PCB to hold it down in place. Now it stays there, and I can correctly insert the SD card.
Great video. Primera pregunta: el botón para aterrizar no funciona si al inicio he despegado con el botón de despegue. Solamente me funciona el botón de aterrizar si al inicio he despegado con el mando dereho/izquierdo. Gracias por tu ayuda. Segunda pregunta: cuando arranco motores la helice trasera izquierda no funciona, pero funciona al depegar. Es normal?
Hi, At my Eachine E58 the Micro-SD card holder does not existent or maybe felt away. Another problem is that it doesn't connect to the smartphone even if the wifi is connected. No picture, no movement. Any suggestions?
Great video! Please help me with this problem of mine. I mistakenly bought not the original eachine e58. now my problem is after a few flight the left rear arm (drone facing me) is busted. upon watching this video I tried to open up the casing of my drone as shown here and noticed that the connection of its arm to the board is being soldered. Can I replace that arm with the one being shown here? I am just beginning to learn how to fly it and enjoying it when suddenly it fell from a 20 ft height and that arm does not run anymore. thank you so much for your time.
@@HowToDIYRc You mean i can cut the plug in end of that arm and remove its cover so i can solder it in the flight board? did i get it right? thank you so much for the reply.
Hi i have a problem with my drone e68 when my battery was fully charged suddenly drone was not turning on in short NO POWER i already checked the battery voltage 4v but the label on battery says 3.7 v. can you help me?
Great how to video! I broke the gear on mine and got the replacement installed no problem. I do have 2 questions tho, I didn't see the link for your tool set in the description, and what size upgrade can be made to the motors? You say they are 7 x 20 mm. What size will fit? Thanks in advance.
hi dabber nice to hear you fixed your gear and she is back flying again i'm sorry to forget the link for the super handy toolset it's up in my pinned comment i'm going to use the same size 720 motors but with higher rpm but still searching internet thank you for showing interest appreciate the questions and tips are always welcome :D
Great job! I have eachine e520s I think inside its very similar. I want change camera for get better quality in video and photos, is it possible? What camera recommend me? Thanks
TEST HOW MUCH WEIGHT the 520s can carry and pick the best camera that fit your test results i hope it can a 4k hybrid runcam or a gopro 7 or 8 but is problay to heavy for your drone how do you like the gps on your drone? I almost bought it but then the mavic mini came out and changde the game
@@HowToDIYRc I think that have power for one go pro o similar camera but I thinked change original camera for other... It's possible? Or better add one action camera?
its not that easy to find one that works with your e520s if it is any simmeler to the e58 camera its nuch easyer to add a new on top of the canopy and go 5.8ghz instead of wifi
@@HowToDIYRc tks by your helps to us. Need your advices for an big issue of my E520S. what can i do to unblocked my E520. i fly tree times with it and on the last fly, after two take offs, it left respond. I change the battery, to tray unblocked -switch ON the drone to connected it with remote control, but the drone start with fix light on top cover, and not respond to connect processing - Gyro calibration- nor can i switch OFF. Only can switch off if put out the battery. i tray many proceding (change batterys - switch on first the remote control and after the drone etç) - nothing result- press switch ON =fix light blue in top cover no one comunication and to switch OFF -must put off the battery. The Camara work fine on APP -LWFPV record videos Because this device not have an hole to Reset Factory, I can not do nothing. can sugest something...TKS
So when i insert the battery into the drone the left side propeller bottom side starts spinning without even turing it on any ideas how i can fix it? Thank you :)
how easy would it be to desolder the existing board connection and replace the cartridge system with corded syma x5c-1 molex connector? I'm assuming the cartridge bay is large enough to carry larger x5c-1 batteries and that the rear of the battery cartridge could be used as a snap in door. Thus eliminating the proprietary batteries and gaining access to intelligent charging. What you think?
maybe i don't have a syma so i cant test it and how heavy is that battery? first i'm going to do a thrust test to give's a idea on how much weight the e58 can carry before we are going for a battery upgrade
Sorry for delay, havent checked my notifies, Humm, I think a typical syma 500 mah battery is about 15 grams. A 600 mah syma type probably weighs around 20 grams. Turnigy Graphene 750mAh LiPo Pack 1S 65C weighs 36 grams, I use these in my custom Syma X5C-1. Look those UP, the pros swear by them. They do not produce the discharge battery heat that degrades Lipos. when I run them out, they are only warm. If it will fit, that is, depending on the casing dimensions. If I owned this E58, there is No Way I would continue using the cartridges. Not when a Syma molex connector is $1. If you swap it, you open up other possibilities like being able to use an intelligent charger to charge 3 or more batteries all at the same time, or to intelligently put them into storage mode (instead of storing them at a low or high state which can both be potentially bad for battery life). I'll take 3 batteries in storage mode and put them all on my Imax B6 charger, ready to go in 45 minutes. I have 10 batteries.
Very good job! Do you know how many kv are the standard motors, and how many kv can the card accept with a more powerful motor ( 3,7v but more kv for more tr/min is more amp I think). Sorry if you don't understand my question (i'm french... sorry...) But a lot of thanks for this video!
help i replaced the flight controller or receiver board and it does not calibrate or respond to controller..My board is slightly different to the replacement
I just got my little drone two days ago. But where most have the memory card there is nothing there for a card to plug into. Have you ever seen one of these drones that record all pix and videos straight to your cell phone or iPad? it is similar to yours but I got mine from wish yours looks like the one on Banggood.
then you got the cheap version that those record to the phone but with lag on sd card is better quality you can also use a screen recoding app to get the footage
I’m pretty upset with this drone. The one you are flying how does it feel in your hand? Thin plastic well built. I need to order a better quality so that why I’m asking I don’t want to be disappointed again.
the plastic is soft/rubber and feels very high quality but its very thin built quality is so so but comes with many spare parts so you can keep re[airing this drone and keep it flying but i just got the eachine 520S with GPS come in and soon show you some vids that might be a better one to buy then the e58
Hi, i need some help with my drone (e58). I was flying it and accidentally landed it in a puddle. Only the back half of the drone got wet (batteries, back motors, etc..) Now my battery will say it finished charging but when I put it into the drone, the drone battery runs out after about 10 seconds. It won’t fly at all, the lights just flash. (The power button doesn’t work either) does anybody know what to do or what parts to buy?
Hi.. at my first flight I just crashed the drone . Now restarting it, its one propeller keeps operating without any command and didn’t allow other propeller to operate.neither my drone synchronised with remote but when I disconnect that propeller ,other propeller start working and drone connected with remote. I think there is a short circuit of that propeller or may b some short circuit in device. What to do. :(
your not the first person to tell me they have this problem and i think you do have short circuit some were on the flight controller check all the components on the FC maybe it's just a bent connector? or lost a small chip please check with a magnifying glass
ore floating ground/mass hopefully the translation is correct is one thing that causes weird issues run a few extra ground wires to different negative - spots to make a full circle to ground things proper this is the one thing that might help wish you good luck buddy :D
i have seen that vid i think the motor wire connectors on the flight controller came lose maybe check an unplug an re plug or best option is to solder the wires directly to the FC
Hey m8, just wanted to hear your thougts on my, current issue. Seems like that my fpv uplink dont work, so im not getting any kind of feed for the app controle. But what weird is, that i stil can find the Wi-Fi and connect to it???.. My guess is that its the camera Flex is broken, ("but then the controlling should still work from app") OR an software problem on the app.. But I have tried other programs to launch it? What do you think the problem could be
I was enjoying the drone very much but after a few crashes the drone is not stable when he flies. I try to calibrate it, tried to fly with remote and via smart phone. All the motors are working and I can fly it but I have to trim it constantly (a lot of drifting) . Sometime when i land it some of the motors continue to work. Any idea what is the problem?? Motor or receiving board. How can I find the problem? Thanks in advance for your help.
Hello again, Dabbler here. I had a problem with my e58 I think was caused by a Xiaomi MI range extender. During the set up of the extender, somehow I caused my WiFi to stop transmitting it's ID. Tried my Note 8, a Note 5, and an iPad mini 4 but the e58 was not sending out its WiFi ID. I ordered the FPV module from Banggood as it has camera, SD Card, and antenna. Will the new module transmit the ID, or will I need to replace the flight board, too? Thanks in advance.
wifi id is the responsibility of the wifi fpv module so you shut be ok with just replacing that one module but why do you think the problem is caused by a wifi range extender seems a bit abnormal to me
How To DIY Rc I think somewhere in the instructions for the extender you can hide your ID. Or maybe it just failed. Saw that situation in a forum while researching my problem. Thanks again!
One thing that tends to be destroyed is the little gears on the motors; it seems to be possible to get new propellor gears, but not the little ones on the motors, only both; is there a source for just the little gears>
@@HowToDIYRc I hate the waste of getting a whole new motor just to replace a little gear ... hopefully my piloting skills will improve before I have an entire bucketfull of perfectly good motors without gears ... (finally managed to get an arm put back together so that it worked).
So it turns out that the Zenith is not fully compatible with the e58; the propellers and propeller gears are a bit different, but the entire arms are; a set of 4 can be gotten from Alibaba for c. $AUD14, and then you are good to go with e58 replacement propellers and propeller gears.
Hi DIY Rc. I am a complete beginner and got my first drone, an e58 a week ago, and have abused it badly, walls, furniture, trees, dogs, Christmas decorations have all suffered. Now, it is on strike, it revs up ok, the propellers all start, but when I attempt to take off, it tilts over towards one of the arms at 2 O´clock or 8 O`clock but does not take off. Then it turns over and then only the propellers at these two arms work. This occurs with both the remote control and the wifi App. I´d be grateful for any ideas. Thanks in advance.
just bought one of these today, I'm disappointed there's no way to keep the SD card in there , it falls out.it's like the slide holders there but there is no inside to touch the contacts to keep the card in there, think it's missing the inner case I hope you know what I'm trying to say you can you respond to this and let me know what you think..
you probably have the 0.3 camera that doesn't have an sd card slot my 2.0 camera those have an sd card slot and it holds the sd card in it place you bought the cheap version without SD card hope this clears thing up for you
Thank you for your response in ordering my product I checked the info I ordered the one with the 2.0 camera. but they sent the 3.0 one..Im sending it back.. I paid $59 dollars for it
This is probably your problem. In my E58, the SD card slot was displaced, so the card could not be inserted. I found the SD card holder PCB inside was loose. So the entire thing had to be taken apart. There was nothing to hold down the back end of the PCB, so it would not stay in line with the slot in the outer casing. I glued a tiny piece of plastic above the back end of the PCB to hold it down in place. Now it stays there, and I can correctly insert the SD card.
201/5000 I bought a drone of that plus the camera is not transmitting to the phone. do i have to put a memory card? i'm using the FYD-FPV mobile app find the wifi signal but it doesn't transmit video
Thanks for this wonderful vlog!!! Btw, a small advise, the microSD card could be removed easily by pushing inwards. This is a spring loaded SD card slot which pops up your SD card upon pushing inwards. :) more power bro!!!
My drone has a tremendous arm in the air, it disrupts the flight a lot, help me, when I get in control with him, he goes to the side with which the arm shakes. What can it be?
if your arms are shacking it can be your motor turns rough? ore the white gear between the motor and prop or prop damage? or maybe you lost a screw that holds the arms and the rubber o-ring in between the arm and body definitely your gyro on the FC doesn't like vibrations and also helps crashing the drone so it's very important you find the source and fix the drone goodluck sir :D
How To DIY Rc Thanks a lot for the help. this weekend I'm going to open the drone and take a look inside and change the propellers that are kneaded, if not better I change the left front arm that shakes.
I have eachine e58 drone, which I recently bought. But the problem is the one key return/ landing function of the remote is do not work. Can you please help me?
only on the remote, you have this problem? but you still can use one key take off with phone yes? under the one key take off button on the remote, there is a little push button you can solder a new one if you have a spare controller from old quads?
Thank you so much for such a detailed video👍, I have problems with Eachine Ex5. After six flights, I can't turn it on anymore. So I have to tear it up and see where the problem would be. In the worst case, I will have to replace the motherboard, but I'm worried if the electronics are plug and play, or if any additional module settings are needed. Do you have any experience with changing electronics in RC toys? Thanks 😉
you need to check if the voltage of the battery reach the motherboard and check the voltage at the turn on and off module and replacing faulty parts is very simple just plug and play nothing extra :D
@@HowToDIYRc thanks for the quick response, from the very beginning he behaved unusually because it was almost impossible to establish a WiFi connection with the phone, and also interrupted it several times, which suddenly one day after landing It couldn’t be turned off, then I removed the battery to turn it off, and now I can’t turn it on anymore. So I suspect the motherboard, and I was wondering if there was anything special to pay attention to. Thanks again.😀
good change something wend wrong with your FC but berhaps your wifi fpv module is also overheated since it creates a ton of heat and needs wind to cool it down standing still for to long burns the FPV module
Ya a lot of people are getting one because it´s so cheap and looking pretty slick but like all drones, you are going crash and break something so I´m really glad eachine don´t sell just one or two spare parts but everything can be replaced and fix your drone to keep it flying but mostly it´s going to be the props because the folding arms reduce the g-force and impact in a crash
I've got a problem whenever I connect the WiFi to my phone and starts open the app and it shows no fpv from the drone . Any solutions ? Btw when I turn on the drone the lights is blinking fast for a moment , any idea what's going on?
the light blinking very fast is calibrating the drone and pairing with controller no fpv solution is updating the app firmware and your phone firmware update
I'm having issues with control. When I start the motors it flips over upside down from left to right if you're facing the rear of the drone. Help please. Can I do a hard reset and how do I do that?
hi dabber i'm sorry forgot the link for the super handy toolset (goo.gl/21fHrQ)
How To DIY Rc how to open a camera board.... Plss help
Are these tools good for RC planes....???????? important question...
the link is broken :(
Could you update the link? 'Invalid Dynamic Link'
The crown gear design is subject to high wear. I just repaired a friend's E58 clone that had significant wear on the motor gear after only a handful of flights. I recommend being generous on putting waterproof grease on the nylon motor gears. Fortunately you can get replacement motors with gear mounted for less that $3 each.
Happy flying!
Doggeslife - where did you see the motors and gears at that price? Love your screen name! The lady that talks inside my phone said IS life, instead of ‘s life .
Or make a small hole in the tip of the drone arm so that you can spray silicon lube into and lube the gears before every flight. Also why not just buy whole cheap E88 drone for $10 or less and use it for spare parts?
Awesome video, but when I looked at your channel you haven’t put out a new video for a year.
I’m so disappointed, it’s hard to find excellent channels like yours. You do have a bunch of episodes that I’m sure I will watch frequently!
RUclips needs more channels with smart information like this one!
Thanks
yes check my eachine e58 upgrade and mods playlist got about 25vids
Tellos motherboard is roughly the same size if not the same size of some of these cheap WiFi drones I’ve seen is it possible to take the motherboard from the Tello and put it inside one of the larger cheaper Wi-Fi drones and connect everything together and make it operational ?
Thanks for the video man! I had to replace the left rear arm and this helped out a lot.
aiht that nice to hear thank you
hope you check out some related upgrade and mod video's too :D
I’m awaiting delivery on my left rear arm does it fold good still?
Thanks buddy just burned out the motor on my E58 and replacing now on order. Thanks again great video!
Thanks for this great video but wondering if you might explain how the camera/Wifi module is removed. On my e58 the antenna, unfortunately, is soldered to this board unlike in your e58 where they've used a u.fl connector.
Hello there can I ask what is that white stuff near motor cuz my drone has no more off that and the motor won't spin
Great informative video. Only flew mine a few minutes and the gears stripped in one arm. I will replace that. However, my camera image is upside down. Can it be flipped?
yes the camera can be flipt..i think its such a long time ago
Great video, I have the very same drone. I lost the rubber washers...any idea what size they might be?
Thanks a lot for the video. My drone is the same model and the right forearm started shaking. Especially when the right front propeller is running. I changed the propeller but it still vibrating. Do you think it can be fixed?
probley missing teeth on your gearbox that white tingy
Hi How to DIY Rc ,,nice video detalled, I seeing with detalles your video, you tray put oFF the WiFI board at final 13,44min after removing the rubber plate, no screw but it has a black locking tab between the two screw cylinders, which should be to open a bit and release the WIFI card upwards. must have another black locking tab on the other side, to release too. The camara just must slide to inside and out with wifi plate. isn't it ??
yes yuor right
This could be your problem:
In my E58, the SD card slot was displaced, so the card could not be inserted.
I found the SD card holder PCB inside was loose.
So the entire thing had to be taken apart.
There was nothing to hold down the back end of the PCB, so it would not stay in line with the slot in the outer casing.
I glued a tiny piece of plastic above the back end of the PCB to hold it down in place. Now it stays there, and I can correctly insert the SD card.
I can install another camera of more resolution for example to change one from 720 to 1080?
yes there is a e58 4k version so shut be possible
hello, great hack :)
since you know electronics I have one question
I have eachine e58 drone without controller, i use my phone and it is noooot good!!!
I bought e88 model which has controller, it says it is 2.4 ghz and I thought maybe I could use it on e58 drone since they use the same one with 2.4ghz, but it does not connect.
Do you have nay thoughts on how to resolve this?
Thank you
they use different code to speak between the transmitter and drone thats why they dont connect sorry dude you can by a hobby grade transmitter that have the abbility to speak 20different codes and check if yours drone code is one of them
hello
did you know something about the e88? look like better, 2 camera, 380g...
tank you
my friends have it and i get many questions about it and the e58 and e88 are very simmeler on the inside and you can make the same upgrades and antenna mods i did to the e58 check my other vids :D
@@HowToDIYRc
cool
your friend has had it for a long time?
did he have any particular problem to report?
yes bad range and drone fly away because of it
@@HowToDIYRc
you think the e58 is better?
no it have the same isseu if you really want a good drone buy the mavic mini or eachine ex4 or ex5
Hi, I need to replace the white plastic cover at the back of the drone. I can't seem to find that piece to replace anywhere. Thank you for this video, its very helpful to replace the top and bottom shell.
No idea what white piece your talking about sir
There is a white plastic part that is above the battery on the back of the drone.
bit.ly/E58_Upper_Body last photo you sse that white piece
The clear cover for the red LED ? Make one from any bit of clear white plastic. Probably food packaging will work.
thanks for the great video. I just bought this drone and from the beginning the wifi doesnt work. If I was to attempt replacing the wifi module it would be the part under the sticky tape? also whats the part to order? wifi module? thanks for any help.
yes it's the blue circuit board under the black protection tape this is the link to the wifi module bit.ly/E58_Wifi_Module_FPV_Camera
Thank you for this video, very informative, But you Got the numbers backwards ? Isn't it E58 fiftyeight not E85, is there an E85 version ?
ye your right i mixed up the numbers but there is a eachine e88 that is very simmeler drone
Very nice tutorial on disassembly of this quad. Very informative on how to get to the motors, gears, etc. Thanks for the video and Happy Flying!
we always like to do an in-depth inspection with the review but that makes the vid way long there for we split the review up in 3 or 4 vids because e58 got so many options and cool functions
thanks for the support :D
I want to change the motors from brushed to brushless any recommendation please and thank you.
buy a nother drone like the mavic mini check my latest vid
The e58 I have the front left motor come on as soon as I put the battery in. Any idea on how to fix this ?
did you already try to unplug the motor connector and connect it again?
@@HowToDIYRc yes I actually had to replace the arm because it got so hot it melted.
then im sure the esc on the flight controller is overheated and melted on the inside... you need a new FC
I put the battery in upside down, and tried to disassemble the copter to pop the battery out. I got 5 of the 6 bottom screws out, but one in the middle stripped. I was able to get the battery out using a toothpick to push it out, but 2 little washers popped out like what happened in your video at 4:53. Any suggestions to get the stripped screw out? Or should I not bother and no worry about the washers?
those washer a rubber o rings that dampens vibration to the flight controller and make it fly better but you don't have to use them and the e5 will still fly :D
Thanks! Thought so. I had a decent flight without them yesterday despite the wind. Video files failed to save on the e58, not sure what that was about but otherwise a success!
Where can I buy rubber rings 5:07 one I lost I need a set of 4 pieces
CHECK THE LINKS DOWN BELOW IN THE DISCRIPTION!
where?
Hi, I just got My new sky drone it’s look the same as Eachine E58. I accidentally crushed it against the door and the forward propeller is not working anymore. Just want to ask some advice from you, since I watched this video ( nice video) and it looks helpful to see what’s the inside of the drone.
My drone propeller blades is intact. My suspicion is the motor or the connections? Can you help please? This is My first drone and I want to fix it.
Oh no! Skye scammed you i'm so sorry they even abuse my review video in their advertisement grrr your drone is the eachine e58 and cost only 26 to 36 euro depending on camera quality in my description below the vid you find links all the spare parts one of them is a complete arm with motor and prop its a simple job plug and play
only luck you have is that from this toy drone every parts is sold as a spare part and that's very rare for toy drones wish you good luck and just follow the links
Geat video. First question: the button to land does not work if at the beginning he desperate with the takeoff button. I only work the landing button at the start that the desperate with the right / left control. Thanks for your help. Second question: when I start engines, the left rear propeller does not work, but it works when it starts. It is normal?
I would like to compliment you with this video, it's clear and simple!
P.s. The motors are sold seperately, you can buy them for about $5 a piece, or as set for $10 from any big online seller/consumer site. And yes, that is almost as cheap as a complete arm but i'm just mentioning it... ;-)
thank you Sir :D
My "trans gear" broke off lucky i ordered 4 pcs whole set of arms for only 640pesos
Hey Thanks for the awesome video! I want to know if there is a way I can get a replacement motor or arm from the company itself and if not where can I get a new one?
eachine is from banggood its there drone brand
can we replace the motors with stronger ones (i.e the motors of the eachine e520 which have similar dimensions 8/23mm compared to 7/20/mm??
you problay overheat the esc and destroy the drone
hi, how can i use its camera with Arduino (or standalone)
not sure
Bro can it lift weight upto 500g
Hi, Very informative video. Thanks for sharing it. Can you make a similar video on the battery of e58. Unfortunately I live in a country where I can't get the battery or a drone shipped from Banggood and I was wondering if I can make one with all the spares on the site. I have ordered all the parts except for a battery . . So once I have assembled all the parts i will need a battery to start the drone. Do let me know your thoughts as well. Thanks
that's a very good question Sir and we got the same problem with lipo battery's not being delivered
except for the one's that comes with the toy itself but you can modify the new 3.7v AA rechargeable battery to upgrade the E58 up to 6000Mah only one problem is the battery connector of the drone is weird for a 1s lipo and need some modifications!
How To DIY Rc thank you so much for such a prompt response. Yes, what I could understand from the pics and your video is that the connector is a 3 pin connector and have been trying to figure out why would they have 3 pin for a 1s battery. Now without the original battery, is there any way to connect a 1s battery ? May be solder a wire from positive and one from negative on the receiver board . .
wow a lot of information in this short video....excellent
haha ye I wish to make it shorter its way too long even for my taste
but the drone is built so good for a toy i'm really impressed and with the supply of spare parts is very nice
Nice video tutorial sir.
Sir i have question..my drone suddenly fell .then my camera not focus..blur picture did you have solution for come back normali focus
Well I'm not a camera expert but if the lens looks ok you might have damage a mirror but maybe it's the lens and there are spare lenses
My e*58 won’t pair with controller or iPhone any more since it crashed , I could not put in a micro sd card nor spring eject it either. Since it wasn’t flying right I opened it up to check and see all wires were tight. and there is no slot for camera. Forget the camera . Put it back together and won’t pair. Can you suggest a purchase or other help ? New board ? Thanks Rich
This is probably your camera problem:
In my E58, the SD card slot was displaced, so the card could not be inserted.
I found the SD card holder PCB inside was loose.
So the entire thing had to be taken apart.
There was nothing to hold down the back end of the PCB, so it would not stay in line with the slot in the outer casing.
I glued a tiny piece of plastic above the back end of the PCB to hold it down in place. Now it stays there, and I can correctly insert the SD card.
Great video. Primera pregunta: el botón para aterrizar no funciona si al inicio he despegado con el botón de despegue. Solamente me funciona el botón de aterrizar si al inicio he despegado con el mando dereho/izquierdo. Gracias por tu ayuda. Segunda pregunta: cuando arranco motores la helice trasera izquierda no funciona, pero funciona al depegar. Es normal?
Hi!!
I would like to ask if you could fit the electronics of hubsan h216a inside eachine e58
Hi,
At my Eachine E58 the Micro-SD card holder does not existent or maybe felt away.
Another problem is that it doesn't connect to the smartphone even if the wifi is connected.
No picture, no movement.
Any suggestions?
You have the cheaper version with low quality camera and no ad card reader
Great video! Please help me with this problem of mine. I mistakenly bought not the original eachine e58. now my problem is after a few flight the left rear arm (drone facing me) is busted. upon watching this video I tried to open up the casing of my drone as shown here and noticed that the connection of its arm to the board is being soldered. Can I replace that arm with the one being shown here? I am just beginning to learn how to fly it and enjoying it when suddenly it fell from a 20 ft height and that arm does not run anymore. thank you so much for your time.
yes you can use this arm and solder the wires to your drone flight board
@@HowToDIYRc You mean i can cut the plug in end of that arm and remove its cover so i can solder it in the flight board? did i get it right? thank you so much for the reply.
yes yes cut plug and solder wires simple as that :D
Hello there.. The E58 motors are same like E68 model?
Don't know sir
Hello, Very good informations !!! What size and what kind of SD card are you using on the E58
+Pierre Pierre high quality sd card no clone or fake 16mb
+Pierre Pierre a micro SD HC 16GB class10
Hope this is enuff info😃
How To DIY Rc Thank you very much
Hi i have a problem with my drone e68 when my battery was fully charged suddenly drone was not turning on in short NO POWER i already checked the battery voltage 4v but the label on battery says 3.7 v. can you help me?
full battery shut be 4.2 volt and at 3.7v the battery is empty need to charge again you need a new on and off switch they are for sale at banggood
Great how to video! I broke the gear on mine and got the replacement installed no problem. I do have 2 questions tho, I didn't see the link for your tool set in the description, and what size upgrade can be made to the motors? You say they are 7 x 20 mm. What size will fit?
Thanks in advance.
hi dabber nice to hear you fixed your gear and she is back flying again
i'm sorry to forget the link for the super handy toolset it's up in my pinned comment
i'm going to use the same size 720 motors but with higher rpm but still searching internet thank you for showing interest appreciate the questions and tips are always welcome :D
Great job! I have eachine e520s I think inside its very similar.
I want change camera for get better quality in video and photos, is it possible? What camera recommend me? Thanks
TEST HOW MUCH WEIGHT the 520s can carry and pick the best camera that fit your test results i hope it can a 4k hybrid runcam or a gopro 7 or 8 but is problay to heavy for your drone
how do you like the gps on your drone? I almost bought it but then the mavic mini came out and changde the game
@@HowToDIYRc I think that have power for one go pro o similar camera but I thinked change original camera for other... It's possible? Or better add one action camera?
its not that easy to find one that works with your e520s if it is any simmeler to the e58 camera its nuch easyer to add a new on top of the canopy and go 5.8ghz instead of wifi
@@HowToDIYRc tks by your helps to us. Need your advices for an big issue of my E520S.
what can i do to unblocked my E520. i fly tree times with it and on the last fly, after two take offs, it left respond. I change the battery, to tray unblocked -switch ON the drone to connected it with remote control, but the drone start with fix light on top cover, and not respond to connect processing - Gyro calibration- nor can i switch OFF. Only can switch off if put out the battery.
i tray many proceding (change batterys - switch on first the remote control and after the drone etç) - nothing result- press switch ON =fix light blue in top cover no one comunication and to switch OFF -must put off the battery.
The Camara work fine on APP -LWFPV record videos
Because this device not have an hole to Reset Factory, I can not do nothing.
can sugest something...TKS
ouch that sucks try calibrating ruclips.net/video/LyC5Ru-b3fs/видео.html
So when i insert the battery into the drone the left side propeller bottom side starts spinning without even turing it on any ideas how i can fix it? Thank you :)
your not the first person with this problem but i don't have a clue
those the drone fly good ?
same problem here, i put the batery and the propeller turns on
how easy would it be to desolder the existing board connection and replace the cartridge system with corded syma x5c-1 molex connector? I'm assuming the cartridge bay is large enough to carry larger x5c-1 batteries and that the rear of the battery cartridge could be used as a snap in door. Thus eliminating the proprietary batteries and gaining access to intelligent charging. What you think?
maybe i don't have a syma so i cant test it
and how heavy is that battery?
first i'm going to do a thrust test to give's a idea on how much weight the e58 can carry
before we are going for a battery upgrade
Sorry for delay, havent checked my notifies, Humm, I think a typical syma 500 mah battery is about 15 grams.
A 600 mah syma type probably weighs around 20 grams.
Turnigy Graphene 750mAh LiPo Pack 1S 65C weighs 36 grams, I use these in my custom Syma X5C-1. Look those UP, the pros swear by them. They do not produce the discharge battery heat that degrades Lipos. when I run them out, they are only warm.
If it will fit, that is, depending on the casing dimensions.
If I owned this E58, there is No Way I would continue using the cartridges. Not when a Syma molex connector is $1. If you swap it, you open up other possibilities like being able to use an intelligent charger to charge 3 or more batteries all at the same time, or to intelligently put them into storage mode (instead of storing them at a low or high state which can both be potentially bad for battery life). I'll take 3 batteries in storage mode and put them all on my Imax B6 charger, ready to go in 45 minutes. I have 10 batteries.
Hi! can these motors be replaced with more powerful ones?
yes if they are 7mm wide if they are any bigger than that you need to make some space and glue them into place
Very good job!
Do you know how many kv are the standard motors, and how many kv can the card accept with a more powerful motor ( 3,7v but more kv for more tr/min is more amp I think).
Sorry if you don't understand my question (i'm french... sorry...)
But a lot of thanks for this video!
why are they using transmission gear instead of connecting motors directly to propellers ?
to get more tourque to get props moving
help
i replaced the flight controller or receiver board and it does not calibrate or respond to controller..My board is slightly different to the replacement
try to google how to pair the pair the a new drone with the controller
Lots of handy info but would anyone know the reason why one of the motors is on when I plug in the battery? I'd be very grateful for the help.
I've replaced the arm but it still runs switched off with the battery in.
your fc got a problem making the motor spin
I just got my little drone two days ago. But where most have the memory card there is nothing there for a card to plug into. Have you ever seen one of these drones that record all pix and videos straight to your cell phone or iPad? it is similar to yours but I got mine from wish yours looks like the one on Banggood.
then you got the cheap version that those record to the phone but with lag on sd card is better quality you can also use a screen recoding app to get the footage
I’m pretty upset with this drone. The one you are flying how does it feel in your hand? Thin plastic well built. I need to order a better quality so that why I’m asking I don’t want to be disappointed again.
the plastic is soft/rubber and feels very high quality but its very thin built quality is so so but comes with many spare parts so you can keep re[airing this drone and keep it flying but i just got the eachine 520S with GPS come in and soon show you some vids that might be a better one to buy then the e58
Hi, i need some help with my drone (e58). I was flying it and accidentally landed it in a puddle. Only the back half of the drone got wet (batteries, back motors, etc..) Now my battery will say it finished charging but when I put it into the drone, the drone battery runs out after about 10 seconds. It won’t fly at all, the lights just flash. (The power button doesn’t work either) does anybody know what to do or what parts to buy?
you need a new FC flightboard
Hey thanks for the reply. Apparently, waiting a few hours also does the trick 😉👍
That back mother board could be fried. Where the battery slides in. Im thinking of using styrofoam type pontoons for landing in water.
@@somewhatdamaged1000 Landing in water sounds like fun, but test it in your bath first ! Then go chase them ducks ! (NO-O-O, just kidding !-)
How big of the memory card can be support ?
Hi sir ! how to fix my drone e58 cause my drone burn the diod ! what should i do ? please help me
buy a new flight board and install it Flight Controller: goo.gl/moy3CS
Can anyone list the arm spacers (O-Rings) size? Thanks
I stuck the battery in the wrong way and it won't come out. How do you fix that?
open up the drone and yank on the battery with a set of pliers
Hi.. at my first flight I just crashed the drone . Now restarting it, its one propeller keeps operating without any command and didn’t allow other propeller to operate.neither my drone synchronised with remote but when I disconnect that propeller ,other propeller start working and drone connected with remote. I think there is a short circuit of that propeller or may b some short circuit in device. What to do. :(
your not the first person to tell me they have this problem and i think you do have short circuit some were on the flight controller check all the components on the FC maybe it's just a bent connector?
or lost a small chip please check with a magnifying glass
I have the same problem do you now the solution for it? Please let me know if it can be fixed.
Hi i want to use the camera on rc car any tips how to power it?
buy eachine e58 motherboard
I do not know
Great video! What kind of oil would you recommend to use on the motors?
you meen the gearbox? is grease no oil for the motors
yes that is good greease
I have a question is the motor can be replace to any arms of drone?
yes yes :D
Oh thank you so much for notice dude i really love your videos.
Thank you :D
Do you have one on the E520s?
no but we while make one
I have when inserting the battery the front right prop spins alone and can not turn off. . any advice?
that's a weird problem
did you open it and have a look at the FC? check every soldering maybe you have something shorting out
How To DIY Rc checked all seems like a chip on board broken maybe
ore floating ground/mass hopefully the translation is correct
is one thing that causes weird issues run a few extra ground wires to different negative - spots to make a full circle to ground things proper
this is the one thing that might help wish you good luck buddy :D
How To DIY Rc maybe you do a video on this i see many have this issue and no solution
i have seen that vid i think the motor wire connectors on the flight controller came lose
maybe check an unplug an re plug or best option is to solder the wires directly to the FC
Not sure if this was answered already but can the camera be replaced with a better quality camera?
some people did this mod and seem possible but i'm not going to try it
Hey m8, just wanted to hear your thougts on my, current issue.
Seems like that my fpv uplink dont work, so im not getting any kind of feed for the app controle. But what weird is, that i stil can find the Wi-Fi and connect to it???..
My guess is that its the camera Flex is broken, ("but then the controlling should still work from app") OR an software problem on the app.. But I have tried other programs to launch it?
What do you think the problem could be
The camera condition most problay since you still can connect to the WiFi module
It worked 😎👌
I was enjoying the drone very much but after a few crashes the drone is not stable when he flies.
I try to calibrate it, tried to fly with remote and via smart phone. All the motors are working and I can fly it but I have to trim it constantly (a lot of drifting) . Sometime when i land it some of the motors continue to work. Any idea what is the problem?? Motor or receiving board. How can I find the problem? Thanks in advance for your help.
check the screws of the props
my e58 cant take off properly its stay on the ground what should i do?
CHECK ALL THE PROPS SCREWS AND VOLTAGE OF THE BATTERY MINIMAL VOLTAGE 3.3V AND AFTER YOU CHARGE MAXIMUM 4.2V
Excellent and thank you for putting up this video!
Thank You Sir :D
Nice! Can you do a video on the 8807W drone remote? My remote won't even power on. Was wondering if its possible to fix that issue.
probably just a loose wire
Hello again, Dabbler here. I had a problem with my e58 I think was caused by a Xiaomi MI range extender. During the set up of the extender, somehow I caused my WiFi to stop transmitting it's ID. Tried my Note 8, a Note 5, and an iPad mini 4 but the e58 was not sending out its WiFi ID. I ordered the FPV module from Banggood as it has camera, SD Card, and antenna. Will the new module transmit the ID, or will I need to replace the flight board, too? Thanks in advance.
wifi id is the responsibility of the wifi fpv module so you shut be ok with just replacing that one module but why do you think the problem is caused by a wifi range extender seems a bit abnormal to me
How To DIY Rc I think somewhere in the instructions for the extender you can hide your ID. Or maybe it just failed. Saw that situation in a forum while researching my problem. Thanks again!
One thing that tends to be destroyed is the little gears on the motors; it seems to be possible to get new propellor gears, but not the little ones on the motors, only both; is there a source for just the little gears>
ebay or buy a compleet arm with motors
@@HowToDIYRc I hate the waste of getting a whole new motor just to replace a little gear ... hopefully my piloting skills will improve before I have an entire bucketfull of perfectly good motors without gears ... (finally managed to get an arm put back together so that it worked).
So it turns out that the Zenith is not fully compatible with the e58; the propellers and propeller gears are a bit different, but the entire arms are; a set of 4 can be gotten from Alibaba for c. $AUD14, and then you are good to go with e58 replacement propellers and propeller gears.
Hi DIY Rc. I am a complete beginner and got my first drone, an e58 a week ago, and have abused it badly, walls, furniture, trees, dogs, Christmas decorations have all suffered. Now, it is on strike, it revs up ok, the propellers all start, but when I attempt to take off, it tilts over towards one of the arms at 2 O´clock or 8 O`clock but does not take off. Then it turns over and then only the propellers at these two arms work. This occurs with both the remote control and the wifi App. I´d be grateful for any ideas. Thanks in advance.
screw down the props there are loose
Is any light in camera or not
light in camera no but two lights just above the camera yes
just bought one of these today, I'm disappointed there's no way to keep the SD card in there , it falls out.it's like the slide holders there but there is no inside to touch the contacts to keep the card in there, think it's missing the inner case I hope you know what I'm trying to say you can you respond to this and let me know what you think..
you probably have the 0.3 camera that doesn't have an sd card slot
my 2.0 camera those have an sd card slot and it holds the sd card in it place
you bought the cheap version without SD card hope this clears thing up for you
Thank you for your response in ordering my product I checked the info I ordered the one with the 2.0 camera. but they sent the 3.0 one..Im sending it back.. I paid $59 dollars for it
OH i'm sorry to hear they made a mistake hopefully they send the correct e58 with fast delivery :D
This is probably your problem.
In my E58, the SD card slot was displaced, so the card could not be inserted.
I found the SD card holder PCB inside was loose.
So the entire thing had to be taken apart.
There was nothing to hold down the back end of the PCB, so it would not stay in line with the slot in the outer casing.
I glued a tiny piece of plastic above the back end of the PCB to hold it down in place. Now it stays there, and I can correctly insert the SD card.
201/5000
I bought a drone of that plus the camera is not transmitting to the phone. do i have to put a memory card? i'm using the FYD-FPV mobile app find the wifi signal but it doesn't transmit video
download the ufo app that shut work
Does this work with my sons drone
Yes yes :D
Hi I need to mix one of my broken motors on my eachine e58 drone can you tell me how to replace it?
open the arm slide out the motor and install the new one it's very simple
you don't even have to solder the motor :D
hola amigo cuales son las medidas del motor de ese dron y el piñon de cuantos dientes es ?
compruebe los enlaces de las piezas de repuesto en la descripción
@@HowToDIYRc ok Gracias amigo
how to change leading gear please make a tutorial video for me..
sorry i lost the e58 flying into the ocean
@@HowToDIYRc nooo..😭
Thanks for this wonderful vlog!!! Btw, a small advise, the microSD card could be removed easily by pushing inwards. This is a spring loaded SD card slot which pops up your SD card upon pushing inwards. :) more power bro!!!
It didn't wend so smooth thx for watching and leaving a comment appreciate the tip :D
My drone has a tremendous arm in the air, it disrupts the flight a lot, help me, when I get in control with him, he goes to the side with which the arm shakes. What can it be?
if your arms are shacking it can be your motor turns rough? ore the white gear between the motor and prop or prop damage?
or maybe you lost a screw that holds the arms and the rubber o-ring in between the arm and body
definitely your gyro on the FC doesn't like vibrations and also helps crashing the drone
so it's very important you find the source and fix the drone goodluck sir :D
How To DIY Rc Thanks a lot for the help. this weekend I'm going to open the drone and take a look inside and change the propellers that are kneaded, if not better I change the left front arm that shakes.
I have eachine e58 drone, which I recently bought. But the problem is the one key return/ landing function of the remote is do not work. Can you please help me?
only on the remote, you have this problem? but you still can use one key take off with phone yes?
under the one key take off button on the remote, there is a little push button you can solder a new one if you have a spare controller from old quads?
help me my drone doesn't fly it's first two propellers doesn't rotate
sir. what is the website for a replacement motor? thanks!
you find blue links in the description below the vid that takes you to a site where you can buy all the spare parts
Thank you so much for such a detailed video👍, I have problems with Eachine Ex5. After six flights, I can't turn it on anymore. So I have to tear it up and see where the problem would be. In the worst case, I will have to replace the motherboard, but I'm worried if the electronics are plug and play, or if any additional module settings are needed. Do you have any experience with changing electronics in RC toys?
Thanks 😉
you need to check if the voltage of the battery reach the motherboard and check the voltage at the turn on and off module and replacing faulty parts is very simple just plug and play nothing extra :D
@@HowToDIYRc thanks for the quick response, from the very beginning he behaved unusually because it was almost impossible to establish a WiFi connection with the phone, and also interrupted it several times, which suddenly one day after landing It couldn’t be turned off, then I removed the battery to turn it off, and now I can’t turn it on anymore. So I suspect the motherboard, and I was wondering if there was anything special to pay attention to. Thanks again.😀
good change something wend wrong with your FC but berhaps your wifi fpv module is also overheated since it creates a ton of heat and needs wind to cool it down standing still for to long burns the FPV module
@@HowToDIYRc Ok thanks, good to know that. I hope to fix it, because otherwise these 6 flights were quite expensive 😕
ye maybe you shut ask for a refund? or discount
Great video!!! Congratulations from Brazil.
wow all the way from brazil thank you for watching Sir appreciated it
The manufacturer should have improved the design by installing bearings on the gearing shafts
they have put a metal bushing in the arm to keep the gear spinning straight
but high-speed metal bearing is better of course
i have eachine e58 but when i want to insert sd card it will stuck
than you have the cheapest version without sd card holder and only 2m pixel camera
can it fix?
open up and try to use a needle to get it out of the slot
I have a problem my drone suddenly won't turn on my battery is fully charged but the drone won't turn on how can I fix it?
open up the drone look for loose wires and check voltage of battery with volt meter
Thanks for the video, I want a battery mod, need to improve autonomy of the drone.
a battery mod is a pretty simple job if you stick with lipo's
Well done bud. I know there weill be a lot of people with these drones that will find this very useful.. :) Well done.. :)
Ya a lot of people are getting one because it´s so cheap and looking pretty slick
but like all drones, you are going crash and break something
so I´m really glad eachine don´t sell just one or two spare parts but everything can be replaced and fix your drone to keep it flying but mostly it´s going to be the props
because the folding arms reduce the g-force and impact in a crash
Hello I am having trouble binding a new transmitter to the drone.
I'm sorry to tell you but what you need is a new e58 motherboard
@@HowToDIYRc will that work with the new transmitter?
Very informative and helpful video, thanks.
:D
I have same drone e58. But i have a problem with it. Two right motors run automatically whe i put a battery? What goes wrong? Anyone help me?
I've got a problem whenever I connect the WiFi to my phone and starts open the app and it shows no fpv from the drone . Any solutions ? Btw when I turn on the drone the lights is blinking fast for a moment , any idea what's going on?
the light blinking very fast is calibrating the drone and pairing with controller no fpv solution is updating the app firmware and your phone firmware update
fast flashing tail light can also mean low voltage chrage battery or its calibration gyro
@@HowToDIYRc Thanks for the info !
I accidentally put the battery in upside down and don’t know how to get it out. Does anyone know?
my E58 fails to take off.... two motor are not rotating....
its just delivered from geek..
what to do sir.....???
plz help
check the motor connectors on the flight controller they can be very weak
maybe you can solder the wires direct to the FC
Can i use this drone gear in x12 drone pls reply
Maybe they do look very simmeler
I have another question. Have you or anybody bind the E58 to a different controller? I feel like that would help me out a lot.
i'm not sure maybe you shut google the protocol
what size is that memory card how many Mb
i used 16mb U1 but now i upgraded to 32mb U3 both work good but U3 you know for sure you get the best quality
I'm having issues with control. When I start the motors it flips over upside down from left to right if you're facing the rear of the drone. Help please. Can I do a hard reset and how do I do that?
check the screws holding the props if they are a bit loose you lose thrust and the 2 good motors giving full thrust makes it flip
I had the same problem with one of my drones turns out I fried one of the motors
Hi Dabber Great piece of info, thank you. But the info is not for the E85, as you keeped on saying.
ye i know said mistake
I can’t bind the controller with the ufo, it used to work but it suddenly stopped binding