These videos are GREAT! Good friend had the TerraCrusher and it was a tough truck. He got me into this whole thing. I had the XXX-NT for a while. It was fun but I sold it to buy a 4WD ST and still have it. Old school! On its 2nd motor but still a blast to bomb around the yard and up and down the street does about 45mph. Great hobby.
totally agree!! thanks! I've been looking for a good shape terra crusher for a long time, pretty rare to find on eBay now. It was a better truck than the T-maxx of the time, although never as popular. I'll show everyone why it's special soon.
exactly! current brushless models are great too, but these old nitros are very accessible today and still provide very good performance. nitros themselves have basically remained the same in terms of power and speed, so we are not loosing much by getting these vintage ones.
same here man!! You saw that Tamiya Nitro Terra crusher I recently got? That thing was beyond cool back when it came out. So many interesting things to talk about with that one. I rem back then the HPI savage 21 first came out, and it was sooooo slow, this was faster if I rem correctly.
totally, me too!! What do you have? gotta get a t-maxx, don't have one of those yet. From what I rem the t-maxx used to always piss me off years ago, lol. That damn trans always had issues.
that means I'm in line with my audience, ahaha. thanks for watching bro. I recently cooked an egg inside the cooling head of this engine, and then I ate it, seriously!!! and it worked, ahaha. Check it out.
ye man!!! This is probably my all time favorite RC. I had this when it first came out too. I eventually converted it to run a OFNA hyper 21 8 port motor with the NEW ERA big block kits. That was a big waste of money and effort, pretty much could never start that shitty motor. BTW did you know it had a factory 1/5 scale steering servo, so cool.
the clubhouse Ur right. I removed it and edited it out of this video. Issue was it was binding too much and caused the carb to have resistance. The rubber probably swelled over time from the oils. Ill work on it and fit it back. Thanks!!!
@@hybrid32494 ok cool, try soaking it in some wd40 for a while, it helped me getting dirt bike carb o-rings pliable again as a (shade tree quick fix),lol
great idea, going to do it today. Did you see the last few second when it ran? that was after I replaced the fuel tubing, but still needs some work on the carb.
I've been working on my Losi XXX-NT restore the problem is my os max .12cv is worn out and barely has compression so I'm not sure where to go from here.
If I were you I'd either convert it to run brushless or buy any cheap eBay nitro engine for like 60 bucks. you just need a basic 90 degree motor mount from eBay and any 1/10 scale brushless system.
hey man!!! Great suggestion, I've been looking for one of those recently. IDK if ive reached the level of giveaway status here on youtube, LOL. That would pretty much mean I can't get any other old nitros. I usually sell them on ebay after a while.
Hi I have the same exact car losi xxxnt,it has a mach 15 engine ,I recently changed the engine clutch,but it still taking off slowly with high rpm.i tried driving it on the grass to see what's gonna happen, It just got stuck while the engine running with high rpm.i even tightened the slipper clutch for the rear wheel,but still the same.the rear wheels spin very freely while the engine is running.any idea what could the problem be?thanks.
hey buddy! I just counted and I can confirm the clutch bell is 18 teeth. I also googled this and here is what it says in a forum "Just got a e-mail back from Adam Drake, the only spur for the xxx-nt is a 51 tooth and clutch bell gears 17-20". I'd say mine is the 51 tooth spur as well, does not look like a 76, but I have not counted it. BTW, I cooked an egg in the cooling head of this thing in a different video, then ate it.
Wasssup Nitro Guru ! Love your vids your killing it nitro gang style ! Im looking for a good/cheap bolt on .15 engine for my xxx-nt sport ! Any recomandation ? Thx in advance and keep on keeping nitro bro
These videos are GREAT! Good friend had the TerraCrusher and it was a tough truck. He got me into this whole thing. I had the XXX-NT for a while. It was fun but I sold it to buy a 4WD ST and still have it. Old school! On its 2nd motor but still a blast to bomb around the yard and up and down the street does about 45mph. Great hobby.
totally agree!! thanks! I've been looking for a good shape terra crusher for a long time, pretty rare to find on eBay now. It was a better truck than the T-maxx of the time, although never as popular. I'll show everyone why it's special soon.
Awesome job man so satisfying restoring old rc this y love this hobby 👍🏽
exactly! current brushless models are great too, but these old nitros are very accessible today and still provide very good performance. nitros themselves have basically remained the same in terms of power and speed, so we are not loosing much by getting these vintage ones.
Great content buddy. Definitely added to my rc playlist. I like learning about nitros.
same here man!! You saw that Tamiya Nitro Terra crusher I recently got? That thing was beyond cool back when it came out. So many interesting things to talk about with that one. I rem back then the HPI savage 21 first came out, and it was sooooo slow, this was faster if I rem correctly.
Nice, im addicted to my collection. Thanks so much!
totally, me too!! What do you have? gotta get a t-maxx, don't have one of those yet. From what I rem the t-maxx used to always piss me off years ago, lol. That damn trans always had issues.
I have two slash, 2x and 4x, big erevo 6s castle system, select 4 10sc. Really enjoy your videos, Thanks again.
Literally like the past 15 trucks I’ve looked up, you have a video on lol.
that means I'm in line with my audience, ahaha. thanks for watching bro. I recently cooked an egg inside the cooling head of this engine, and then I ate it, seriously!!! and it worked, ahaha. Check it out.
The tape around the pullstart sting is there so the handle of the pullstart sticks out the body for easy use.
I’d love one of these they look awesome even if they are 15 years old
Congratulations on 5k
thanks!! Got a long stretch to 10K now. Probably a year and a half based on my current growth, and money spending on eBay, LOL.
Great video bro 👍🏻
That would be cool to see the rustler 2.5 out n running
LOL Ur gonna look like ZZ Top if u don't get this thing back together soon 🤣
Five Finger Death Punch is my sh@t
Hey man!! Finally somebody knew that song, good job STEVO. You like bullet for my valentine too? I'll video the rustler eventually for ya.
The crusher is sweet!!!!!!!!!
ye man!!! This is probably my all time favorite RC. I had this when it first came out too. I eventually converted it to run a OFNA hyper 21 8 port motor with the NEW ERA big block kits. That was a big waste of money and effort, pretty much could never start that shitty motor. BTW did you know it had a factory 1/5 scale steering servo, so cool.
@@hybrid32494 To much compression to start easily? I did not know that! very cool!
PhilthyCo RC That ofna motor had an upgraded metal pull start cord. That is how tough it was to start up. The reg one ripped almost instantly.
@@hybrid32494 Crazy!
Amazing dude!!
your missing the dust cover that goes behind the linkage lever on the carb, it also acts as an air seal.
the clubhouse Ur right. I removed it and edited it out of this video. Issue was it was binding too much and caused the carb to have resistance. The rubber probably swelled over time from the oils. Ill work on it and fit it back. Thanks!!!
@@hybrid32494 ok cool, try soaking it in some wd40 for a while, it helped me getting dirt bike carb o-rings pliable again as a (shade tree quick fix),lol
great idea, going to do it today. Did you see the last few second when it ran? that was after I replaced the fuel tubing, but still needs some work on the carb.
@@hybrid32494 sure did, when ya get it tuned,
should be pretty fast.:)
At least I know you get it running in the next video and it looks like the yellow tubing wasn’t the problem
I've been working on my Losi XXX-NT restore the problem is my os max .12cv is worn out and barely has compression so I'm not sure where to go from here.
If I were you I'd either convert it to run brushless or buy any cheap eBay nitro engine for like 60 bucks. you just need a basic 90 degree motor mount from eBay and any 1/10 scale brushless system.
I might see if I cant find a replacement engine, I don't think I can give up that awesome nitro feel.
Cool vid! Do a give away of this car or something else! That would be cool. Also buy a hpi wheelie king nitro that would be AWESOME. Do a giveaway!!
hey man!!! Great suggestion, I've been looking for one of those recently. IDK if ive reached the level of giveaway status here on youtube, LOL. That would pretty much mean I can't get any other old nitros. I usually sell them on ebay after a while.
Yeh ur up to giveaway. U got a lot of subs. I also can’t wait for part 3. Yeh wheelie king would be cool
Do you have a electric conversion video
Hi I have the same exact car losi xxxnt,it has a mach 15 engine ,I recently changed the engine clutch,but it still taking off slowly with high rpm.i tried driving it on the grass to see what's gonna happen, It just got stuck while the engine running with high rpm.i even tightened the slipper clutch for the rear wheel,but still the same.the rear wheels spin very freely while the engine is running.any idea what could the problem be?thanks.
Hi, Is that one use Spur gear 76 tooth and Clutch bell 18 tooth?
hey buddy! I just counted and I can confirm the clutch bell is 18 teeth. I also googled this and here is what it says in a forum "Just got a e-mail back from Adam Drake, the only spur for the xxx-nt is a 51 tooth and clutch bell gears 17-20". I'd say mine is the 51 tooth spur as well, does not look like a 76, but I have not counted it. BTW, I cooked an egg in the cooling head of this thing in a different video, then ate it.
Is that your favorite song lol
it's one of my fav bands!!! I also like bullet for my valentine!
How many RCs do you need? You must have 20.
Wasssup Nitro Guru ! Love your vids your killing it nitro gang style ! Im looking for a good/cheap bolt on .15 engine for my xxx-nt sport ! Any recomandation ? Thx in advance and keep on keeping nitro bro
Waiting tik tok tik tok
You don't like it give it to me I like it
Beautiful love u.