I always enjoy watching you and your dad work together. You two are both so calm and collected, it makes for a very enjoyable video to watch. Look forward to seeing how the 8N does with the plow in the ground! Almost makes me want to get dad’s little N series going now!
I wish handling the tires/rims was always that easy. I had to replace tires and wheels on my sons 8N. I had to beat the bolts out with an air hammer and 2lb dead blow. Those things get really crusty over time on the original top hat style rims. Love seeing some 8N love on the channel and hope to see you and senior plowing with it this summer.
I'm with you on the grease being better than anti-seize. Anti seize is great for smearing on the mechanics' creeper in the next bay so he gets a handful when he picks his creeper up! haha! !Enjoyed watching you and Sr. work on the 8N!
There are two books on e bay that i recommend pertaining to setting up a plow. Better Plowing and Plowing at it's best both published by International Harvester. Tells exactly what is needed to match up a tractor to a plow. Inside width of wheels compared to plow cut being the major factor. Tells exact measurements for each size plow no matter the manufacturer. Happy Plowing !
I did the side to side swap on my Dad's IH 424 when I was 15 years old. Slightly larger tire and FULL of calcium chloride. I did it all by my lonesome self, but looking back from age 70 now, its a wonder to me. I had to swap it back later, again by myself. OH MY!
Hey Toby,,always great to see you and Senior working together. And yes some of us, watch every minute and read every comment! Thats why when i need a Squatch fix,i rely on the 1113 build.
Thanks for the video Toby! That is a sweet little tractor. My brother in law just picked up a 48 8n and a 9n. The 8n is a bit of a project but runs amazing. The 9n was bought off the original owners grandson and is ready to be put to work. They are handy little machines to have. Cheers
I spent thousands of hours on an 8N growing up. We moved the front and rear wheels multiple times a year. Rears went out to 88" and fronts in to 44" to cultivate 22" rows. Then back to regular setting (not sure inches) to mow and rake hay and do field work. We had a set of steel lug dual wheels that we used when loading manure from the corral. Thanks for the memories
Toby, great to see you and Sr together in a video. I think you have it adjusted for plowing. That’s the way my 8N spacing is set and it plows great. Can’t wait to see the 8N in action. Enjoyable video. Thanks
We had a market garden up in the Northwest Territories of Canada and had exactly the same tractor and 2 bottom plow! Had many memories of plowing the 30 acres every fall to get the fields ready for spring.
I didn't see a follow up to this plow setup on the ford 8N. I was checking to see if you tried it out with the wheel spacing adjustment. I have a few fergusons that are similar to your ford and I am tweeking the spacing on the plow at times depending what tractor is on what plow. Mine the plow shaft is slid almost all the way to the left opposite from where your is and works good. Thanks the the informative video's.
Thanks for watching 👍 Unfortunately right after we made this video, our summer got so busy that we didn’t have time to open up any ground with the 8N, so next spring or summer we’ll get it out and put it to the test.
I am still surprised at how versatile the old tractors are, and I'm pretty sure thats why they're still in use to this day. Easy to work on, easy to mod to address specific tasks... And a random thought, yeah my grandfather grew up on a farm that used only mules ....well, he started working mules to plow fields in the 1890s, and he called all tractors 'Mules'.
Thanks for sharing this video with us. Love how you 2 work together (i assume on and off camera are about the same). Not all father son teams can be recorded... I think if you get close enough on your gross adjustments like wheel placement, the rest will be a matter of a couple thread revolutions on the adjusters--lots of plow day participants just hook on and try to go, so you are doing well. The stories I hear about draft control all seem to end with the farmer turning it off and plowing full depth (which is why you see homemade gauge wheels on mounted plows). Harry Ferguson&Henry Ford intended draft control to control working depth and load so a biography i ready about mr ferguson says he threw a fit when he saw a gauge wheel added to his implements. If you went through your lift cover as thoroughly as your other projects, you should be able to get satisfactory draft performance--wear is the #2 issue with ford ferguson draft, #1 is operator error. Those rear wheels have 8 positions they can sit in, although i think the N only use 6 or 7. If the rims are aftermarket you may need spacers to get the exact spacing since some specifications on reproduction parts are consolidated. You may end up moving the front axle out one more hole if you have tracking issues, I think centered in the rear track might be better than aligned with the inner edge--YMMV. Hope you have a productive summer and cooperative weather!
This comment isn't about today's video, but about your detailed description of the removal and re-installation of the PTO shaft on your Farmall M from a couple of years ago. I had to replace the bushing at the front end of the shaft and was able to do it because of the detail in your video. I did not have to pull the lid off. Thank You, Ellis Kinney
I use a round mouth shovel rather than a pry bar when removing tyres. Allows you to lift, and drag the tyre away from the hub using the shovel as a skid, and also means you cal rotate the tyre by dropping it on the hub, move handle left or right, then lift tyre and bring handle to centre to jiggle the tyre around to line hub up. Also works great on semi truck tyres.
Good video 👍 the bog standard 2 furrow Ferguson plough over here in UK was a 10 inch furrow and rear wheel settings were usually 48inch centre of tyre to tyre, then with a 12 inch plough rear wheel settings were increased to 52 or 56 inch settings with front wheels set accordingly so that inside edge of front and rear tyres ran in line, final settings for getting the plough to run true can be achieved by turning the plough cross shaft one way or the other and also moving the whole plough either on land or off land by sliding it across the shaft 👍 looking forward to seeing it in the field 👍
Thanks, be nice to see the adjustments made to the draft control when the time comes. Best I remember you put top link in the top hole on the tractor and have the spring just loose enough to barely turn it by hand.
This is such an early 8N that it doesn't have the top link bracket with the 3 different holes, it still has the 9N type bracket that just has the one, so that will make draft control adjustment a bit more difficult to dial in.
Always remember to rotate your tires every 5,000 miles or fifty years, whichever comes first. I like the look of the wheels with the offset outwards better anyway, and it's probably more stable on a hillside. That front end coming apart reminds of dropping a K-frame out from under an older Mopar front end that has torsion bar suspension. When you drop it away from its mounts, it just flops all around in about 40 planes of motion. They are actually kind of dangerous to handle like that. Nice job. Love it when you and Senior team up together.
Excellent video Squatch 253 SR & JR also think you guys got Ford tractor all done nice on back and front wheels plus alignment perfectly too ! Thumbs up 👍 to both of hard working on this !
That was a nice bit of content for a rainy day. She’ll need the usual adjustments when the shares hit the sod but you’ll have her in fine fettle in a few minutes. Hi Sr. 🥸👍👀✅
My best friends Dad had a 8N years ago and we loved it, we could do so many things with it that it was amazing. I love how nice yours looks and I missed the noise it makes.
That is the sound of my childhood. One neighbor had an early 50's Massey Ferguson. One neighbor had a Jubilee Ford. A couple had 50's Internationals, and I'm not sure what models. One neighbor had a late 60's or early 70's International. My step grandmother had a 50's International, probably an M, and her tenant farmer had probably a Super C. The only newer tractor around me was our Deutz, and it was a '75ish.
Loved this video, hope you video all of the required adjustments to get the plow dialed in. It will diffidently help me when I go to setup my Case 3 bottom plow
We had a 9n and a 600. I remember switching the wheels on the 600 many times. But did it a little different from you. I wondered if yours would be the same. On the 600, we would take the whole wheel (tire and rim) off and swap them. So rims would be concave when the wheels were set out.
Wow it's nice to see one of those sporting its 3 Points hitch plough and the wheel stance looks much better and old friend had a Ford Ferguson which is pretty similar I recall all the times we changed it back and forth. Cool video loved it.
Nice 8N, till today I never new the early ones didn't have a live hydraulic pump. What would look sweet behind that would be a Dearborn 2 bottom disc plow.
It's interesting how similar the Ferguson tractor is to the 8N i noticed the front axle had the axle stay bars fixed to the center part of the axle on the 8n but it had the cast in lumps on the outer parts that my fergie has the axle stay bars fitted to
To run the hydraulic pump on the N series Fords, the PTO needs to be running as the pump is driven off the PTO shaft. This along with having the clutch engaged
Hi Toby I always run te20 35 and 135 52" centres on the rear and 48" centres on the front. That's with 650 fronts and 11-28 rear, so the wheels run inside treads matching, then adjust the hake to cut a 10"" furrow or 12 what ever your plugh is.not sure what you call the cross shaft in the USA
My father had a TO-20 Harris Ferguson that he had a 2 disc plow for it. That plow would turn that tractor sideways when he tried to use it. The tractor was too light for that type of plow. He had a 3 point hitch disc for it that never was used in my lifetime. He said that it was too big for the tractor and that when he tried it out he had to be very careful because the front tires would barely stay on the ground when the disc was raised.
The usual method to over come the problem you had with the plow is to loosen the bolts on the cross shaft and then move the plow sideways and use adjustable stabiliser bars to the 3 point hydraulic arms to fine tune its position. . Looking at the plow there is a lot of scope for this adjustment. .
That adjustment is already as far as it will go, and it still needed more offset to track correctly behind the rear tire, so it was time to move the tire 👍
Good job moving wheels out should make plow work better and also make tractor more stable with wider track Looks like u are having some inside time for small projects hope weather does not get really bad
Rear wheel swap. At least there's no bolt-on weights to add extra fun by getting in the way or using through-bolts that end up holding the weight & hoop to the hub at the same time.
That is a nice size garden you and Sr. started. Any drainage problems on the build site after all the rain? Will your friend be growing grass to make hay like he did a few years ago?
Not sure if I remember right, but I think you have to remove the pans and put the rims on the inside of the pans to get the right wheel spacing for that plough. (52 inch wheel centres with 12 inch tyres). It's been a long time, so I'm sorry if I'm wrong.
I noticed you cranked the tractor to raise the 3 point. Have you ever seen the trick where you twist the PTO back and forth while the engine is off to raise the 3 point?
It would have been neat if you had the tractor jack that Ford sold when these old Ford tractors came out. It would have lifted the whole tractor. If you do plow with this tractor, please post the video(s)....I'm a Ford tractor guy, having 5 of them ranging from an early 1944 2N to a 1967 2000 3 cylinder gas. I do have a '47 8N that I have been replenishing. Maybe try some stabilizer bars also to keep the plow from drifting from side to side? I know there is some debate on using stabilizer bars for plowing, but it wouldn't hurt to try since you already have the stabilizer brackets mounted on the tractor.
Wheel spacing to inside of wheel for plowing , from center of tractor pto . 14 " is the magic number plus what ever the plow bottom is 14" + !4" = 28" . 14" + 16" = 30 " . All ways pull from center of plow . plow should be level side to side with tractor wheel in furrow and back of plow 1/2 " to 1" lower than front furrow . Plow draft rules for plows mounted and semi-mounted , On the land plows have the same rules other than the tractor sits up on the land and not in furrow ,so no 14" rule , but has a rule where dual wheels must not be to wide .If the duals run over furrow tractor loses traction on furrow side and wonts to turn tractor towards furrow be cause of more traction on land side pulling towards furrow ..I had a rod that bolted on the tractor that went out from tractor to furrow with a vertical rod that I eyed the furrow up with to know where furrow was witch I got from John Deere .
Did you try rotating the cross shaft on the plow? The plows are designed to move them right or left to increase the width of cut on the furrow. The end of shaft (where you hook the tractor arm) has 2 flat surfaces to put a wrench on to make it easier to rotate. I sure wish you had a Dearborn plow instead of a Ferguson. They plow different on rolling the furrow.
What brand of jack stand do you have? I'm looking for something similar for the upcoming brake job on my 641 and am having problems finding something that tall.
I meant the sway bars that way it keeps her from when you go into your ditch with your tires. Your plow always doesn’t go over to your right hand side and start plowing too close.
The top link is attached to a spring-loaded plunger bracket on the back of the tractor, and it's designed to sense whenever the attached implement strikes an object (like a rock, tree root, etc.) because that makes the implement push harder on the spring-loaded plunger. The other end of that plunger is attached to an internal mechanism that is supposed to make the 3-point arms lift slightly, automatically pulling the implement up until it clears whatever obstruction it's up against. But, the entire system needs to be adjusted just right for all of this to happen, and we've never had to actually adjust any of it because the plow is the only implement we have that actually requires the draft mechanism to work, and we've rarely ever used it because the tractor wheels have never been set correctly to match it.
Hi, I think the settings for a ferguson plough is wrong and the wheel settings on your tractor were correct for the plough. When I was learning to plough I had instruction from a world match ploughing champion on setting up my plough and tractor. Front wheels tracking 48" tyre centres, rear wheels 52" tyre centres. (deep sides in). The plough cross shaft should be set so that the first bottom measures 12" from the inside of the right hand tyre at the point. These settings are for a 12" plough. I don't know if your settings are different from ours in Europe. Hope this helps.
Hey if you need some more "content" for the 8n can you touch up the ford emblems on the fender and hood that makes my eyes twich lol , keep up the good videos, love them all
52" centres should be right for a 2 furrow ferguson plough with 12" furrows. That's what we always ran on te20 and mf135. I think that's what you had originally 🤷♂️
Working on a 8N, what better way to spend a rainy day.
A man and his dad spending a rainy day working on a tractor. How much better could it get 👍
An uncle's definition of Eternity was 'Plowing 80 acres with a two bottom plow'.
Thanks, Squatch
Always enjoy watching you and Senior working together. 👍
I always enjoy watching you and your dad work together. You two are both so calm and collected, it makes for a very enjoyable video to watch. Look forward to seeing how the 8N does with the plow in the ground! Almost makes me want to get dad’s little N series going now!
I wish handling the tires/rims was always that easy. I had to replace tires and wheels on my sons 8N. I had to beat the bolts out with an air hammer and 2lb dead blow. Those things get really crusty over time on the original top hat style rims. Love seeing some 8N love on the channel and hope to see you and senior plowing with it this summer.
I'm with you on the grease being better than anti-seize. Anti seize is great for smearing on the mechanics' creeper in the next bay so he gets a handful when he picks his creeper up! haha! !Enjoyed watching you and Sr. work on the 8N!
There are two books on e bay that i recommend pertaining to setting up a plow. Better Plowing and Plowing at it's best both published by International Harvester. Tells exactly what is needed to match up a tractor to a plow. Inside width of wheels compared to plow cut being the major factor. Tells exact measurements for each size plow no matter the manufacturer. Happy Plowing !
I’m sure that you know how lucky you are to have a dad like Senior!
Nice to have a Senior episode.
Great teamwork and you both have a pleasing presense on camera.
I did the side to side swap on my Dad's IH 424 when I was 15 years old. Slightly larger tire and FULL of calcium chloride. I did it all by my lonesome self, but looking back from age 70 now, its a wonder to me. I had to swap it back later, again by myself. OH MY!
Thanks for the education. My dad died '77 I was 7 never got to see those days.
I saw the jackstands slide in, and the axles above it and I was thinking to myself "RUBBER!" and you guys never disappoint!
Old inner tube comes in handy 👍😂
Hey Toby,,always great to see you and Senior working together. And yes some of us, watch every minute and read every comment! Thats why when i need a Squatch fix,i rely on the 1113 build.
Thanks for the video Toby! That is a sweet little tractor. My brother in law just picked up a 48 8n and a 9n. The 8n is a bit of a project but runs amazing. The 9n was bought off the original owners grandson and is ready to be put to work. They are handy little machines to have. Cheers
Always good to see The A Team in action.
I spent thousands of hours on an 8N growing up. We moved the front and rear wheels multiple times a year. Rears went out to 88" and fronts in to 44" to cultivate 22" rows. Then back to regular setting (not sure inches) to mow and rake hay and do field work. We had a set of steel lug dual wheels that we used when loading manure from the corral.
Thanks for the memories
Toby, great to see you and Sr together in a video. I think you have it adjusted for plowing. That’s the way my 8N spacing is set and it plows great. Can’t wait to see the 8N in action. Enjoyable video. Thanks
Love those two-tone paint schemes on those old 8Ns - same for the old Ferguson 35s. Great work on the Ford!💪🏻💪🏻💪🏻
We had a market garden up in the Northwest Territories of Canada and had exactly the same tractor and 2 bottom plow! Had many memories of plowing the 30 acres every fall to get the fields ready for spring.
These Ford tractors were everywhere, in the farmland areas I grew up in, in the 50s and 60s.
I didn't see a follow up to this plow setup on the ford 8N. I was checking to see if you tried it out with the wheel spacing adjustment. I have a few fergusons that are similar to your ford and I am tweeking the spacing on the plow at times depending what tractor is on what plow. Mine the plow shaft is slid almost all the way to the left opposite from where your is and works good. Thanks the the informative video's.
Thanks for watching 👍 Unfortunately right after we made this video, our summer got so busy that we didn’t have time to open up any ground with the 8N, so next spring or summer we’ll get it out and put it to the test.
I am still surprised at how versatile the old tractors are, and I'm pretty sure thats why they're still in use to this day. Easy to work on, easy to mod to address specific tasks... And a random thought, yeah my grandfather grew up on a farm that used only mules ....well, he started working mules to plow fields in the 1890s, and he called all tractors 'Mules'.
Thanks for sharing this video with us. Love how you 2 work together (i assume on and off camera are about the same). Not all father son teams can be recorded... I think if you get close enough on your gross adjustments like wheel placement, the rest will be a matter of a couple thread revolutions on the adjusters--lots of plow day participants just hook on and try to go, so you are doing well. The stories I hear about draft control all seem to end with the farmer turning it off and plowing full depth (which is why you see homemade gauge wheels on mounted plows). Harry Ferguson&Henry Ford intended draft control to control working depth and load so a biography i ready about mr ferguson says he threw a fit when he saw a gauge wheel added to his implements. If you went through your lift cover as thoroughly as your other projects, you should be able to get satisfactory draft performance--wear is the #2 issue with ford ferguson draft, #1 is operator error. Those rear wheels have 8 positions they can sit in, although i think the N only use 6 or 7. If the rims are aftermarket you may need spacers to get the exact spacing since some specifications on reproduction parts are consolidated. You may end up moving the front axle out one more hole if you have tracking issues, I think centered in the rear track might be better than aligned with the inner edge--YMMV. Hope you have a productive summer and cooperative weather!
This comment isn't about today's video, but about your detailed description of the removal and re-installation of the PTO shaft on your Farmall M from a couple of years ago. I had to replace the bushing at the front end of the shaft and was able to do it because of the detail in your video. I did not have to pull the lid off. Thank You, Ellis Kinney
I use a round mouth shovel rather than a pry bar when removing tyres. Allows you to lift, and drag the tyre away from the hub using the shovel as a skid, and also means you cal rotate the tyre by dropping it on the hub, move handle left or right, then lift tyre and bring handle to centre to jiggle the tyre around to line hub up. Also works great on semi truck tyres.
Good video 👍 the bog standard 2 furrow Ferguson plough over here in UK was a 10 inch furrow and rear wheel settings were usually 48inch centre of tyre to tyre, then with a 12 inch plough rear wheel settings were increased to 52 or 56 inch settings with front wheels set accordingly so that inside edge of front and rear tyres ran in line, final settings for getting the plough to run true can be achieved by turning the plough cross shaft one way or the other and also moving the whole plough either on land or off land by sliding it across the shaft 👍 looking forward to seeing it in the field 👍
You made me yell out NO to playing in the rain. My tractors only get wet when they need a wash. lol
Thanks, be nice to see the adjustments made to the draft control when the time comes. Best I remember you put top link in the top hole on the tractor and have the spring just loose enough to barely turn it by hand.
This is such an early 8N that it doesn't have the top link bracket with the 3 different holes, it still has the 9N type bracket that just has the one, so that will make draft control adjustment a bit more difficult to dial in.
A bonus of the rain is it should k ock the pollen down quite a bit, you might luck into some painting conditions if the buzzing pests calm down.
I’m HOPING to be able to get the red on all of the Super M wheel pieces tomorrow - it looks promising as of right now 👍
Always remember to rotate your tires every 5,000 miles or fifty years, whichever comes first. I like the look of the wheels with the offset outwards better anyway, and it's probably more stable on a hillside. That front end coming apart reminds of dropping a K-frame out from under an older Mopar front end that has torsion bar suspension. When you drop it away from its mounts, it just flops all around in about 40 planes of motion. They are actually kind of dangerous to handle like that. Nice job. Love it when you and Senior team up together.
Excellent video Squatch 253 SR & JR also think you guys got Ford tractor all done nice on back and front wheels plus alignment perfectly too ! Thumbs up 👍 to both of hard working on this !
Another very enjoyable video. Gentle, precise work.
That was a nice bit of content for a rainy day. She’ll need the usual adjustments when the shares hit the sod but you’ll have her in fine fettle in a few minutes. Hi Sr. 🥸👍👀✅
That’s a pretty sweet tractor
Working with your dad. I wish I’d done more of that.
My best friends Dad had a 8N years ago and we loved it, we could do so many things with it that it was amazing. I love how nice yours looks and I missed the noise it makes.
Looks great! I’ve always loved the Ford 8n. I did the same to my ‘53 Ferguson TO-30. I use that thing everyday around the farm.
Except for the manufacturer of course and not being gray in color gosh it brought back memories of my childhood. Edit beautiful restoration.
I really like watching how you work and I really admire the calm way you and your father work
As per old massey ferguson manuals (as late as 60s manuals for the 135), there was a jack that would use the 3pls to jack the back of the tractor up
Yes. Still have one. It picks up the whole tractor, not just the rear.
That is the sound of my childhood. One neighbor had an early 50's Massey Ferguson. One neighbor had a Jubilee Ford. A couple had 50's Internationals, and I'm not sure what models. One neighbor had a late 60's or early 70's International. My step grandmother had a 50's International, probably an M, and her tenant farmer had probably a Super C. The only newer tractor around me was our Deutz, and it was a '75ish.
Loved this video, hope you video all of the required adjustments to get the plow dialed in. It will diffidently help me when I go to setup my Case 3 bottom plow
you need one of them ford jacks that used the 3 point to raise all 4 wheels at the same time
One of my first tractors was an `48 8N with the front pancake ignition, 6v. positive ground. I spent more time fixing it to run than I did using it.
We had a 9n and a 600. I remember switching the wheels on the 600 many times. But did it a little different from you. I wondered if yours would be the same. On the 600, we would take the whole wheel (tire and rim) off and swap them. So rims would be concave when the wheels were set out.
The 8N is such a great tractor. The old 40’s/50’s iron was the apex of durability in my humble opinion.
Toby, ford made a 3pt hitch jack for the 8n , really nice
Wow it's nice to see one of those sporting its 3 Points hitch plough and the wheel stance looks much better and old friend had a Ford Ferguson which is pretty similar I recall all the times we changed it back and forth. Cool video loved it.
love when senior chimes in
Dad was really excited to see Senior doing some narrating. Hopefully it fits out the door, 😂.
Nice 8N, till today I never new the early ones didn't have a live hydraulic pump. What would look sweet behind that would be a Dearborn 2 bottom disc plow.
I learned to plow on my dad’s 48 8n when I was 13 years old.
It's interesting how similar the Ferguson tractor is to the 8N i noticed the front axle had the axle stay bars fixed to the center part of the axle on the 8n but it had the cast in lumps on the outer parts that my fergie has the axle stay bars fitted to
Looks cool with plow from the back.👍👍
Good video. I have a Ford 601 Workmaster about a 59'. Wish I knew enough to rebuild it.
Thank you for sharing this project.
Draft is critical when plowing and it's been my experience it can drive you nuts ,but when it's right it's a fine thing
That is a fun project to experiment with.
Looks like you can squeeze out four different bias positions in those drive tires if you flip the hubs and the tires accordingly.
To run the hydraulic pump on the N series Fords, the PTO needs to be running as the pump is driven off the PTO shaft. This along with having the clutch engaged
Thanks for the video Toby! A little change of pace but a great informative video. Can’t wait to see what comes next
Hi Toby
I always run te20 35 and 135 52" centres on the rear and 48" centres on the front. That's with 650 fronts and 11-28 rear, so the wheels run inside treads matching, then adjust the hake to cut a 10"" furrow or 12 what ever your plugh is.not sure what you call the cross shaft in the USA
I have one of those to. Need some work
My father had a TO-20 Harris Ferguson that he had a 2 disc plow for it. That plow would turn that tractor sideways when he tried to use it. The tractor was too light for that type of plow. He had a 3 point hitch disc for it that never was used in my lifetime. He said that it was too big for the tractor and that when he tried it out he had to be very careful because the front tires would barely stay on the ground when the disc was raised.
Looking forward to seeing the Ford roll some dirt.
Love seeing 8N videos I've got a 51 with Sherman combo.
The usual method to over come the problem you had with the plow is to loosen the bolts on the cross shaft and then move the plow sideways and use adjustable stabiliser bars to the 3 point hydraulic arms to fine tune its position. . Looking at the plow there is a lot of scope for this adjustment. .
That adjustment is already as far as it will go, and it still needed more offset to track correctly behind the rear tire, so it was time to move the tire 👍
Good job moving wheels out should make plow work better and also make tractor more stable with wider track Looks like u are having some inside time for small projects hope weather does not get really bad
Rear wheel swap. At least there's no bolt-on weights to add extra fun by getting in the way or using through-bolts that end up holding the weight & hoop to the hub at the same time.
That is a nice size garden you and Sr. started. Any drainage problems on the build site after all the rain? Will your friend be growing grass to make hay like he did a few years ago?
Not sure if I remember right, but I think you have to remove the pans and put the rims on the inside of the pans to get the right wheel spacing for that plough. (52 inch wheel centres with 12 inch tyres). It's been a long time, so I'm sorry if I'm wrong.
Looks like it is ready to go!
I noticed you cranked the tractor to raise the 3 point. Have you ever seen the trick where you twist the PTO back and forth while the engine is off to raise the 3 point?
So at the end of the video, say "Hey Dad, don't get me with the plough!!!" 😆😆
What do you think of quick hitch for saving ones back when hitting up to something
Thanks for the video .
It would have been neat if you had the tractor jack that Ford sold when these old Ford tractors came out. It would have lifted the whole tractor.
If you do plow with this tractor, please post the video(s)....I'm a Ford tractor guy, having 5 of them ranging from an early 1944 2N to a 1967 2000 3 cylinder gas. I do have a '47 8N that I have been replenishing. Maybe try some stabilizer bars also to keep the plow from drifting from side to side? I know there is some debate on using stabilizer bars for plowing, but it wouldn't hurt to try since you already have the stabilizer brackets mounted on the tractor.
Seems to me like is set kind of wide now but it will be interesting to see when you get ploughing with it.
Wheel spacing to inside of wheel for plowing , from center of tractor pto . 14 " is the magic number plus what ever the plow bottom is 14" + !4" = 28" . 14" + 16" = 30 " . All ways pull from center of plow . plow should be level side to side with tractor wheel in furrow and back of plow 1/2 " to 1" lower than front furrow . Plow draft rules for plows mounted and semi-mounted , On the land plows have the same rules other than the tractor sits up on the land and not in furrow ,so no 14" rule , but has a rule where dual wheels must not be to wide .If the duals run over furrow tractor loses traction on furrow side and wonts to turn tractor towards furrow be cause of more traction on land side pulling towards furrow ..I had a rod that bolted on the tractor that went out from tractor to furrow with a vertical rod that I eyed the furrow up with to know where furrow was witch I got from John Deere .
Did you try rotating the cross shaft on the plow? The plows are designed to move them right or left to increase the width of cut on the furrow. The end of shaft (where you hook the tractor arm) has 2 flat surfaces to put a wrench on to make it easier to rotate. I sure wish you had a Dearborn plow instead of a Ferguson. They plow different on rolling the furrow.
We’ve adjusted everything to the maximum on this plow, and have come to the conclusion that the rear wheels were just in too far 👍
My uncle had a rig to lift all four wheels on his Ford , using the lift arms . I think it was a Ford built item,
That set up, looks like it'll be cutting a almighty wide front furrow..
Thank you guys
What about your anti sway bars. they stop the implements from moving sideways during operation.
They’re not to be used with the plows, they inhibit the drafting action that you’ll need to have if you ever need to plow on a slight arcing path.
@@squatch253 Thank you! I was going to ask where the stabilizers went but reading the comments saved me the time. 👍
Keep your eyes open for a "Ferguson Jack"...
The one thing I dislike about my '49 8N is reverse gear is about twice as fast as it oughta be!
Senior has said the same thing about this tractor 👍
What is the distance between the tires. I'm ready to adjust mine and I'm Shure that previous owner has mine way to wide.
I also have a Ferguson plow like that one. Can you tell me where you would get new plow shares for it?
I don't think they make them anymore, we just rely on combing the swap meets and finding good originals.
Tighten your arm chains also. 😂. I had to learn that the hard way
Inside of furrow wheel to where shin cuts furrow should be same as bottom size. 12", 14" or 16"
What brand of jack stand do you have? I'm looking for something similar for the upcoming brake job on my 641 and am having problems finding something that tall.
I’m not sure who made these, all that’s on them is “7 Ton Capacity” stamped in the frame and they’re 20” tall when fully retracted.
Where are your stabilizer bars to keep the plow from going back-and-forth on side to side
You don’t want to run stabilizers with the plow, because it needs to be able to balance itself out with its own draft 👍
I meant the sway bars that way it keeps her from when you go into your ditch with your tires. Your plow always doesn’t go over to your right hand side and start plowing too close.
I always thought that the plows for the N series were Dearborn, built on the Dearborn plant owned by Henry Ford ?
I've never really understood that draft control feature. How all does that work?
The top link is attached to a spring-loaded plunger bracket on the back of the tractor, and it's designed to sense whenever the attached implement strikes an object (like a rock, tree root, etc.) because that makes the implement push harder on the spring-loaded plunger. The other end of that plunger is attached to an internal mechanism that is supposed to make the 3-point arms lift slightly, automatically pulling the implement up until it clears whatever obstruction it's up against. But, the entire system needs to be adjusted just right for all of this to happen, and we've never had to actually adjust any of it because the plow is the only implement we have that actually requires the draft mechanism to work, and we've rarely ever used it because the tractor wheels have never been set correctly to match it.
My first thoughts were will it fit through the door way????
Hi,
I think the settings for a ferguson plough is wrong and the wheel settings on your tractor were correct for the plough.
When I was learning to plough I had instruction from a world match ploughing champion on setting up my plough and tractor.
Front wheels tracking 48" tyre centres, rear wheels 52" tyre centres. (deep sides in).
The plough cross shaft should be set so that the first bottom measures 12" from the inside of the right hand tyre at the point.
These settings are for a 12" plough.
I don't know if your settings are different from ours in Europe.
Hope this helps.
This is a 2-14” plow, pretty standard bottom size here 👍
Hey if you need some more "content" for the 8n can you touch up the ford emblems on the fender and hood that makes my eyes twich lol , keep up the good videos, love them all
52" centres should be right for a 2 furrow ferguson plough with 12" furrows. That's what we always ran on te20 and mf135. I think that's what you had originally 🤷♂️
This is a 2-14” plow, a standard size for around here 👍