Kitchen Makeover + PLUMBING ON CONCRETE (Ep.2)
HTML-код
- Опубликовано: 6 май 2021
- "The first 100 people to go to www.blinkist.com/mrbuildit are going to get unlimited access for 1 week to try it out. You'll also get 25% off if you want the full membership".
On this episode of concrete slab house reno we are doing the kitchen plumbing. moving waterlines and drainages and even sending electrical though the concrete.
➤Website (Guides & Tutorials)
www.mrbuilditandco.com
➤Support on Patreon
/ mrbuildit
➤Shop My Tools
www.mrbuilditandco.com/tools
➤Check out my MERCH
www.mrbuilditandco.com/merch
➤Ryobi Power Tools
www.ryobitools.com/hp
➤FOLLOW ME on Social Media:
Instagram- /
Facebook- / misterbuildit
MY PODCAST (Next Door Neighbors Podcast)
➤APPLE PODCAST:podcasts.apple.com/us/podcast...
➤SPOTIFY: open.spotify.com/show/58NgtzL...
➤RUclips: / @nextdoorneighborspodcast - Хобби
20 year master plumber here. Great DIY/ home owner job. Drain line has a bit to much slope but it will be fine👍
What's the disadvantage of having too much slope?
@@ryanbeckett536 leaves the waste behind causing build up in the drain. The water needs to carry the waste out of the drain with 1/4” per foot
@@timlaureano6160 Thank you!
way too much
@@timlaureano6160 Correct, the water will run down faster than the waste, leaving the waste behind to possibly dry, lump up and clog the pipe.
He really lives up to the name! This man be out here BUILDING!!!
Disagree
@@jasonburnham7631 diy standerd
If you use emt in wet locations you should used the rain tight compression connectors. PVC probably would have been better
Restoration company’s watching this, heart rate going up....
tip on the plumbing, put the cleanout plug above the combo for easier service of drain cleaning. with it being below youd have to suck out or drain out that entire horizontal branch from the sink to below the cleanout cap. next time put your combo below the cleanout
Amazing how you aren’t afraid to jump into different stuff like this and manage to do it like a professional. Absolutely love the series!
Thanks so much!
This is what we're here for. Clear video and explanation, difficult job but not too much and no clickbait nonsense. Well done!
Just by me looking at your videos, makes me feel good that I can do renovations in my home. Thanks a Million 👍🏽
This process is so cool to watch. I'm learning so much from watching your videos, and one day I hope to do them when I build my own home.
Love watching the Reno and your channel? So informational. Can’t wait to se your next projects!!!! Love your channel!!!!!
Thanks so much!!
Nice work m'man! So cool seeing this kitchen slowly coming together. I also really like how you're filming the steps/videos. You're making it clear that this isn't a quick 'weekend project', this crap takes a good amount of time, but if you keep at it and put in some work, it can be done! Keep the vids coming A.M.!
I'm really excited to see the kitchen come together.
good job kara woooth
Yes. been waiting for this
Nice to see you back to doing informative content without dramatisation! Good work
Speedy Delivery just what I needed.
Coming along! So exciting!
This one was great! So many really good tips and comments in this episode!
Glad you think so!
Love the confidence. These videos made me comfortable to remodel a room in my house and it came out great
I'm so glad!
Great video... I cut into my parents slab to run a sink drain. These saws are amazing.
cannot wait to see this house come along 💗💗
first name too much hard to say
@@karandhindsa1265 or-reh-lee
Love the shirt! I got mine too and will be showing it off in my next video, coming out soon!
I'll be that guy. But if it gets one person to do it... Wear a respirator when sawing concrete. Inhaling that shit is no joke. And throw up some plastic to keep the dust from going all over. It goes EVERYWHERE. Just did my post tension slab to run from current micro spot to the island. Dust made its way upstairs and all the way down a hall 35 feet to the front of the house. Even used .4 poly to section off but the dust just lingers forever.
👆 this though… ALLLLLL OF THIS! 👆 😷
Disappointing considering he was a Resp Therapist before going to RUclips so he knows better.
another great vid, dude! Thanks!
You were smart to rent the big tools for that concrete cutting! Great job...can't wait to see what's next!
I love this series so much. It's like This Old House but without old boring dudes.
Instead its a couple old exciting dudes! ;)
@@Jordan-kk5xj Nah, Alex is maybe 30. I like Tommy Silva but dude is 74 years old. In the last 5 years his mental acuity has taken a huge hit. He talks really slow and comes off like he thinks everyone is an idiot the way he explains things. But Tommy is about the nicest dude you will ever meet. He really just needs to hand the reigns of This Old House over to someone else at this point. All those guys do. They need to take a cue from Roger and retire. They're really dragging the show down at this point and it's getting hard to watch.
YT Channels like Mr. Build It are interesting and fun to watch. They're also informative and are shot extremely well. The camera work on this channel is top-notch.
@@plasmac9 I'm just having fun mate. Mr build it is awesome
To see how well and much your content is growing compared to where you started just shows how much better your videos are the content was always good but just seems lately its more polished , sending all the best to all of you and your new addition all the way from Wales UK
I appreciate that!
another great video well done 👍
Love it. Now its a good friday!!!
Enjoy!
"Don't be gross." Can't wait to see the finished result!! Looks great so far!!
Nice work man!
finally, been waiting!!!!!!!!
Super helpful thank you!
Very interested to see how the AAV works in the kitchen! I’ve heard from friends who’ve installed them that they wear down and smell dank after a few years. Smart idea to build the access door!
It’s plumbing code for any AAV valve to accessible
AAV valve is what we used in our kitchen remodel with the sink in the island, trust me it works!
i really like your energy keep it up man
Great video.
You made that plumbing look so easy! Never seen those crimp connectors (UK). Seems a lot easier than push fit or copper!
Don’t use those fittings. Also don’t follow him on any plumbing. Always hire a professional that is a journeyman. This to protect you and the system.
I wish I had all your knowledge and skills. Awesome work!
If you belive on yourself enough, one day, you will
@@diogor420 You're right. Thanks!
he’s got no knowledge relax 😂
Awesome video!!! I wish my projects went this easy!! Good luck the rest of the way. Would it have been a good idea to weigh the framing down to have consistent contact with the adhesive or do you believe it's not that big a difference??
Why are u people hating on the man? If you don't like his channel or content go watch something else but u watch every video and go to the comment section and start talking shit lol do u have nothing better to do or are u just jealous when u see a man being successful and getting shit done. Instead of wasting so much time hating on others put that time in to make yourself successful. Much respect 🙏 to all the hard workers out there.
Looking good!
Thanks!
Pot fillers are fantastic!! If you have the opportunity to put one in, do it. Just make sure the shut off valve is where you can access it... just in case your grand kid thinks its something to "hang" off of. :/
Oh No Rose, don't scare me like that! I have two little rugrats with more to follow, haha! :D
@@woodworksbygrampies1284 Sorry. Hopefully your grandbabies will know better. :) Guess it only looks like "gym equipment" when the stove is out of the way. :P
@@RoseGreen haha! :D Have a good one Rose.
That one way valve is a lifesaver! I thought you were going to have to cut another channel in the concrete for that. Well done and thanks for the tips!
I was thinking the same thing, I was wondering the whole time, "Why is the channel so narrow". That alone is worth watching this episode. Have a good one Charles!
Thanks 👍
His voice and energy level remind me of Chris Pratt. Lol, love the channel!!!
that silica dust is now floating everywhere in your new home, nice job with the PPE as well
go home nancy you’re drunk
Boomer alert
i love it
very cool
⭐️⭐️⭐️⭐️⭐️ Great job as usual, Stay safe & Healthy... Abrazos
You can put string through the conduit to make pulling the cable through a lot easier, especially as there's a vertical bit to the run too.
ur a good dads
This dude is flat out dope. Wish I knew as much as this dude. Man goals haha
Appreciate that
Can u say snorkle fan? Thats your friend...simple job...I do it all day
Looks good. The only thing I wouldn't do is glue the trap onto the ABS waste line. Instead I would dry fit a small piece of ABS pipe with a rough in cap on it. The trap itself would not be installed until the cabinet is installed. This allows for clean hole cut in the cabinet back board.
Shouldn't you use a treated bottom plate on that pony wall since it's on a concrete slab?
Was the drain plumbing already set in place before you began this project? I will be tackling the same exact job in my house here pretty soon and was curious to know how you located the drain plumbing under the existing slab. I was thinking of using a thermal probe and just dumping a considerable amount of boiling water down the existing wall sink.
make a shirt that says “we are not trained professionals, we’re just not afraid to try and fail”
no
“Not a professional just not afraid to try”
Would probably look better to make one that says "Professional" with "Not a" in much smaller text...would be cleaner
haha u fail
Love this series!
What is the make/model of the thermal camera you are using? Would you recommend it?
Awesome Vid! During your sponser shout out, what is the is that a special peg board organizer that all of your Ryobi power tools sit on?
Great video. Always informative! I just can't beleive you don't tarp things off with all the dust that saw creates lol
Me neither
I've been doing this for weeks now renovating a house. Almost every house were I live have concrete floors.
Belle prestation👍*
Wow! Was there any thoughts about protecting the surrounding area of the home or furniture before using a wet concrete saw or jackhammer
It's very interesting to see how different building standards are over the world. I've never seen a vent pipe in my life here in Sweden:)
Thanks for watching!
Well you didn't look very hard. Plumbing needs venting
Love your videos! Ironically I have two boys named Kyle and Tyler! We are building a house in Texas. I’d hire you if you were closer! My favorite remodel so far is the master bedroom. Love the beams! Seriously, you and your wife should be hosts in HGTV!
What are your go to sites to learn all this stuff? Specific RUclips channels? Etc? Love watching these videos!!
I'm sure that wharever you are looking for is available on SquareSpace™.
(Note: This comment wasn't brought to you by SquareSpace™)
No RUclips channel can teach you local plumbing and electrical ordinances. Find your gov building department site in your neighborhood/city/suburb and learn the local requirements. 📕 The rest is practice, practice, practice.
YOU GAVE LIKE YOUR WHOLE HOUSE A MAKEOVER XD
Hii!!! Lol love your channel.
Hey, thanks!
I was just curious how you were going to secure drywall to the studs along the wall with the pot filler since you are not able to screw into those metal plates? Are you going to cut away a little more drywall underneath and secure a slightly larger piece of drywall underneath those plates since there are water lines and electrical?
you will hang a larger piece and just put your screws around the strike plates you only need a screw every 8 inches
You did that with ease! How much would you charge for a smalled job. Cut the slab and extend the sink plumbing 5 ft and then recover? 3600 estimate I got seemed sketch!
I assume some projects require permits. Could you explain the process of what requires a permit, what doesn't require a permit, and the steps when it does require a permit?
"Anyone want some cotton candy? ...shouldn't have done that."
How many days of work was this, including researching, sourcing materials and installation?
Love the work, do you have any 1" lines? Pretty sure its impossible to crimp by hand...failed today
it’s not impossible. why are you touching 1” waterlines for? call a plumber
Question was the red pex on the right hand side? And cold or right on the new island portion? Or am I tripping. Reason asking is cause in Texas is hot is always left and cold is always right?
Matt carriker 2.0
For your subbers, most wire that goes through the slab for code has to be water resistant UF or thwn, and the nitpicker in me could help but notice the hot water on the right instead of left
Not trying to hate, I enjoy your content
Do you think he accounted for a countertop when he measured for the pot filler?
i like how you can skip first 3 minute of the video so you see the progress
Great job and clever idea to use the thermal camera to see the right place for the channel to cut... But $260 for 4 hours rental of a consaw and a jack hammer? Dude! Just for comparison, here in Ireland a consaw is $45 for 24 hour rental and a jack hammer about $50.
Your rental places prices are on the high side I'd say.
The AAV valve has to be 4 inches above THE RIM OF THE SINK not the drain line.
Hi! I’m thinking of doing the same thing. How much is this project going to cost me if i hired some?
is the emt conduit suitable for underground?
Trying to figure out why you didn’t asphyxiate with that gas saw running indoors! I understand the temptation to do it, I haven’t seen electric electric saw that even comes close to the speed. Safety aside, you have no dust control and spreading exhaust fumes all over your customers furniture. Not sure how that’s ever going to get out of the house.
Also seems like you had to cut through some rebar in that process that you did not repair. Good thing it wasn’t a post tension slab
Great video and thank you. Is the purpose of the water for cooling the cutting blade or for controling the dust created. I note you did not wear a mask and presumably the reason was that there was no dust.
Did you cross the water lines??? Left Hot and Right Cold...I noticed blue pex on the furthest run?
Yup! I was hoping someone would catch that. But you could always cross the water supply lines
🔥🔥🔥🔥
MY QUESTION IS LIKE WHERE DO YOU GUYS EAT
Also there is a third W when you go to that sponsored website
Did you glue that p trap in place 😬 that seems dicey
Galvanized emt(electrical metallic conduit)with set screw couplings was the wrong choice please use pvc next time. Emt in direct contact with earth has a limited shelf life. Eventually that conduit will rust and collapse. Not to mention direct burial for emt is not listed in the NEC code. Also set screw couplings are not water tight (also are not listed for direct burial). Water will eventually seep into the pipe and deteriorate the wire and the wire will fail and could cause a hazard for safety.
Lol that's what I just said I walked in and my wife was watching the video, and I said is that guy putting emt in the ground, surely that's rigid, and then I saw the couplings and I laughed? That's a no no, unless they came out with a new style of set screw rigid couplings and u threaded 90s, it's definitely emt not rmc.
My OCD was kicking in there when he would cut a plumbing line a few inches from an existing splice! (See 15:27) I'd probably have cut the splice out to eliminate one more failure point. I'm sure it will be fine though anyhow!
Can anyone explain to me when you would need a permit to do stuff like this? for instance I want to knock down a half wall that separates my kitchen from my living room. would I need a permit to do that? I also want to remodel my master bath... tile the shower and move the shower head location to be a waterfall from the ceiling. I don't think I'd need a permit to tile the shower but would I need one to change the shower head plumbing location?
he doesn’t get permits it’s all hack job
I need this same exact thing done, Are You in Louisiana?
Your a freakin DIY genius. You've inspired me put in a pot filler in my kitchen too. What's a pot filler?
ur last name should be swimmer
did you have to pull permits for this work? im assuming. great video
nope he didn’t pull no permits he’s a hack
You sure you used abs glue? I have only ever seen yelllow and black
Cleanouts go above highest tie-in.
Strange you guys don’t have a main shit off for the water inside the house if your in an area that gets snow it’s wise to put a main shut off inside the house just in case you can’t get the one outside durning the winter in case of emergency. And it’s just more convenient
Day 1 of asking him to do a build off with john malecki
That's a Pay-per-View Event!!! Has to be multi phased event, not one and done similar to what Duff and Buddy did on their competition.
👍🏻👍🏻
Why there is an went tube for the sink?????
Alex, did you get permits to do this? did you hire someone to help with permits?
Permits outside of a city??? Unheard of if it isn’t structural. 😂
he doesn’t pull permits or he’s fail
@@kylephillips8732 dont you need permits to do anything plumbing or electrical that changes the layout and stuff? Genuinely curious