Это видео недоступно.
Сожалеем об этом.
OpenTorque Actuator (developed by Gabrael Levine)
HTML-код
- Опубликовано: 20 апр 2019
- I have decided to build the OpenTorque actuator, developed by Gabrael Levine (hackaday.io/pr.... I changed the design slightly to adapt for my hardware (bearings and 3D printer). The idea is to test Quasi Direct Drive reducer (reducer with the large air gap and low reduction ratio below 10). In this video I have build this reducer and tested that it works. In the next video I will test it and check how applicable it is for the robot arm.
Special thank you to my special Patron: Wesley Corp!
Please subscribe. This will help me to develop other projects like this, to bring the bright future closer!
One time donation:
www.paypal.me/...
If you want to help this channel, please support me on Patreon:
/ skyentific
Instagram: / skyentificinsta
Facebook: / skyentificface
Twitter: / skyentifictweet
#Robotics #ODrive #OpenTorque
Please do not hesitate to leave the comment. Any comment will help to promote this video. Thank you!
And sorry for the bad audio...
я так понял вы по русски говорите? сделайте субтитры на русском, видео интересные
Skyentific i found the audio adequate
have a an idea that might be good for you, how to contact you?
Incredible. Awesome actuator. Can't wait to see it on the robotic arm
Thank you!
I cant able to skip your videos and leaving the comments like.... Love ur videos. So explanatory. Thanks for entering into RUclips world 😛😛. Since no one is there to explain these things freely in youtube. 😅😆
Hi, I've updated the design here to reduce the gear backlash:
github.com/G-Levine/OpenTorque-Actuator
Let me know if you find any other issues. Thanks!
Great! Thank you very much!
Понимаю, что Ваша аудитория в основном англоязычная, и вместе с тем многие русские молодые "инженеры" (дети) были бы Вам очень благодарны за русскоязычные версии роликов, хоть наложением голоса. У Вас очень годный контент, в России такого не хватает! Спасибо! Да и не дети тоже:)
Вот я поддерживаю!
Есть смысл подучить английский вместе с детьми, не?
@@fly-high-me Учим :)
Sr. My respect for you, your designs are amazing
Ivan 2VP , thank you!
Thx for saying "Hey Google" so much. Now i have to reset all my smarthome devices.
Такого управления я ещё не встречал! Это круто!
Спасибо, за комментарий!
Hey Google... make me an electric motor with high torque, low backlash, 10 W/cm³, low noise, 95% efficiency, quadrature sensor w/1 arcsecond accuracy and shaft speed of 1 rev/s.
I laughed as much as you went overboard with this joke ... then laughed again.
This is wonderful. I want to pursue Mechatronic engineering and this is really inspiring .
Very nice! Glad to hear this! This is very interesting field!
This is a piece of Art! Greetings from Vancouver, BC
Thank you!
very good job Can't wait to see it on the robotic arm
Thank you!
This is just brilliant! It’s got me so excited to try some of these things. Brilliant prints too (I love my mk3 too!). I’ve only ever done things with steppers so am keen to try some brushless motors. Thank you so much.
Thank you for your kind comment!
I like your awesome actuator.
I am seated in your channel, wow! excellent !
Thank you for your kind comment!
Haha I love the voice commands! It's just like before but you don't have to type!
Exactly. It is very convenient, and hands-free. :)
you speak English very clearly, I do not know English well, but I understand you well
very helpful ! congratulations with this demo!
Very cool! Looking forward to seeing the performance of this component!
Thank you so much for your videos! They are so informative and you seem very sympathetic as well ;)
excellent work!
to tell the truth, it was my main goal to construct an actuator, thanks.
You are welcome! Thank you for your comment!
Very exciting stuff. You are finding the way senpai.
Thank you for your kind comment as usual!
Have you ever considered doing an AMA (Ask Me Anything) on Reddit? I’d love to read about your background, your education, previous work experience and how you got started doing what you’re doing. Fascinating stuff. Keep up the good work. If you’ve already done an AMA, could someone link it so we could all enjoy it?
Однозначно подписка и колокольчик. Это просто топ контент. Чётко, ясно, без воды, огонь 🔥🔥🔥
Very nice motor package! It's really tough to make a low cost zero backlash gearhead. That's always the limitation of a hobby class robot.
Thank you. Absolutely agree! This is my goal to make zero backlash actuator, and make robotic arm with it. I think it is possible.
Интересно смотреть и слушать) лайк)
Fantastic design!
Thank you!
Вентилэйтор уже можно сменить на fan))
I'll try!
A way to better reduce the backslash is by using helicoidal gears
You might be able to use them
Very cool! It will be very interesting.
Judging by the intro clapping frequency i thought this was going to be a meme review!=)
Love those birings.
Awesome work !!!!
I really like your video.
I am creating the same actuator (open-torque) !
And the information about radius and so on are really useful for me.
But I have a question.
What materials do you use for 3D printing ?
Thank you !
Thank you! I used PETG filament from Prusament. And Prusa i3 MK3 printer.
I love your Videos! :)
Thank you!
good work man
Thank you!
Very cool! Actuator videos are the best. Did you ever figure out what was causing the loss of torque on the one you were testing last month with the belts and big cross roller bearing?
For this one, I suspect the first limiting factor will be tooth jumping due to the case deforming toward a triangular shape from the outward pressure of the 3 planet gears. Wrapping it in carbon fiber should get closer to the 80Nm theoretical limit listed on the Hackaday page, but probably something else will break before that.
Thank you! Good point for the tooth jumping. I hoping to have at least 15Nm from this actuator. With the last month reducer, I don't have the answer yet. But I suspect that I loose a lot of power in the belt transmission (maybe the tension of the belts is too high). I am still working on it.
Subbed! Awesome videos!
Thank you!
the tone of your wireless kit.
check if the transiver offers you -dB (6 or 9 oder something).
try it, that should sound more plesant.
greetings
I will check this. Thank you for advice!
Wonder if i can use it to set a stop block on my miter saw table ... that would be wicked. Worm gear maybe?
love your video. You might want to mute the audio when you say hey google though :P. You triggered my google home devices almost every time. I had to turn them on in order to watch your video hahaha. Subscribed btw.
Sorry for this :))
First of all, this is an awesome application of the Odrive! Great Job...
Q1. With your encoder, are you running it in SPI or PWM with your Odrive?
Q2. When you up-scaled your prints to make decrease the slop, did you scale up your 3 planetary gears in X and Y dimensions? 1 sun gear in X and Y?
Thank you for your kind comment!
For the Q1: I used this encoder in ABI mode (just pulses). Because this mode is easiest to use with the standard ODrive firmware.
For the Q2: I scaled up the all three gears in the both X and Y dimensions. (I made this in the Fusion360).
Thank you for the great questions!
@@Skyentific what is scaling up gears?
that's a monster motor
Yes! :)
Good video
I dint finish the video, but let me ask You this: do You have some table for shrink measurements for printing dimmensions ? If You do, are the values are the same for small parts as for big ones ? Could You please expand the subject of correct values so printed parts (FMD(regular pinter) I suppose) have tight fit ? Best regards
How did those planetary PETG gears hold up? How much torque did they handle?
I wonder if you could use something like one of those scooter / skateboard hub motors to build something similar.
So awesome! What power supply do you use (you have the link?)? Does it support enough amps to check the limit of the system?
Great question! I used here 24V 400W (from stepper online). It has enough current, but not enough voltage as I found out recently.
Skyentific Yaa I saw your new video with the 48V Odrive. What power supply did you use for that one?
Nice! Is the encoder position absolute or is homing required?
Спасибо.
Hi Skyentific, maybe you should make a harmonic drive for it.
Can you comment on holding torque and stalling?
It looks great!! Is it useful to use such gear assembly with stepper motors like Nema 23 etc. ?? Please reply.
Cool Job ! What a power supply you use ?
Hey. Good work. I am building the same actuator. I have a hard time getting the odrive to make the motor spin. Which settings did you use for the number of pole pairs and the cpr of the encoder. Did you make other chnages to the odrive settings?
I changed only number of pole pairs (20) and the CPR (4000). It is on time 10:30 of this video. This is enough. I've heard that some magnetic encoders have different CPR...
Imagine the cnc machine with voice control :) "hey, google, set the position to x 100, y 100"
Отличная реализация. А каким образом реализовано управление голосом?
Very nice!
Thanks for the videos. Very interesting. I am interested in building a robot of my own, but I would like to try force-driven actuation. As I understand it, all of the motors you are using use their full force until they arrive at the pre-programmed position and then stop. Are you aware of any variable-force motors, I mean motors that apply a given force, regardless of the position of the rotor? I am having a hard time finding one. Thanks!
Bigger air gap ???, did you mean a bigger diameter for bigger torque, or is there any thought about the "clogging" with low air gap and strong magnetisation? Having almost no air gap is more efficient...
Air gap is the gap between rotor and stator. I talk about it in my video "Theory of affordable robot arm". But basically you are right: a bigger diameter for higher torque.
@@Skyentific Building a motor with no air gap: crossbreed a (radial) solenoid motor with a cycloidal gear... (would be a massive multi-pole motor, where each coil would pull the centre gear in the outer "gear", no excenter needed, low inertial mass...)
Thank you. I have a question: is the motor used here a dc motor or an ac motor? It seems that ac motor is a better choice for actuator due to less jittered torque output. but it seems that all hobby actuator builds are using "brushless" motors, I'm wondering if they are brushless dc motors?
Do you have an idea about the amount of play in a joint of the measuring arm used in metrology?
thank you
Amazing project. My question is what should be the ideal voltage for driving the motor, also what kind of DC power supply can feed it with the required power? Unfortunately, the laboratory power supplies I am familiar with, are rated for around 150 W, which is not even close to what this motor needs.
The easiest way is to use the LiPo batteries, they can provide very high current. For this project I used 400W 24Volts power supply from stepperonline website.
А вы пробовали сделать актуатор на основе Harmonic Drive? Мне кажется это интересная идея.
could this handle something more than a robot arm like a legged robot?
Очень круто!
awesome awesome awesome :)
Very nice video, you have a new follower👍.
What about PID regolation with Odrive? Is It possibile?
Thank you! Yes. It is possible to adjust PID values.
Why does the motor hunt for its final position when it stops? Is there any way for it to be an exact stop like a stepper motor does?
do you specifically discuss encoders in any of your videos ?
Not yet. But may be I will do this in the future. I think this is very interesting topic, and there are many different inexpensive encoders now.
can you 3D print a ring to make bearing fit properly ? do you recycle your plastic as filament ?
Hello, what power supply do you use ? Did you use different amperage (A)? It recommended 48V ?
Thanks you
Awsome video!! How did you set up google assistant on rasoberry pi?
Thank you! Great question. Check the last week video from my channel. I explain how to do this.
where do you get that bearing?
AliExpress or Alibaba. If I am not mistaken, this is RA8008 bearing.
@@Skyentific thank you! Love the vids!
which 3D printer do you use?
are the 3D print files available ? Would love to make one of these.
Sorry the ignorance, but if you can set the position of the motor, isn’t it called a Servo instead of Actuator?
good time of day. please tell me what program do you use on the Raspberry Pi
What do you think about integrating cycloidal gear for actuator?
5:44 maybe just put tape around to increase diameter. Or some wrap of thread.
awesome!
Thank you!
For some reason ODrive takes almost two seconds to settle on correct position - is the I PID constant too low by default?
cool!!!!
Are the design files with your changes available?
Awesome!
What was the cost of doing this in parts?
Can we use it to robot arm
Sir,
I'm having problem with installing odrivetool in rasberripi..
How should I solve it???
I installed it but my odrive is not showing up in the odrivetool?
Excuse me, which 3D printer are you using?
The name is: Prusa i3 MK3, very good 3D printer, but not the cheapest one. For the filament I mostly use PETG from the Prusament.
What print resolution and nozzle size did you use? Default speed?
Yes default speeds, standard nozzle (0.4mm) and resolution of 0.15mm.
@@Skyentific Thank you, this is really great work! I am thinking of integrating of integrating the shoulder into the shoulder of our humanoid robot.
What's the reduction ration of the gearbox?
Great job!! What´s the bearing code?
Which bearings do you use?
How long these Plastic made Gears will last?
What printer do you use?
In this video, everything is printed on Prusa i3 MK3. But I also have a Tevo Little Monster with 0.8mm nozzle for the fast printing.
what is the bearing name?
de paziszyn 👍
Can you give us information about your 3D printer?
Hey, i like your Videos very much. You have good explanations and inspiring projects. Would be nice if you have a little better Lighting and a better Microphone for your Videos. That will help make your Videos more interesting for more viewers ;)
Thank you!
Yes, I totally agree. I don't want to spend much money for the filming equipment, I prefer to spend for motors and drivers. But I think, I have to improve at least the audio. Thank you for feedback.
А вы заметили склейку кадров после голосовой команды и перед началом работы мотора?
Andromeda, из-за моего медленного интернета там есть две секунды на между командой и началом выполнения команды. Эти две секунды и вырезаны, что бы не мучить зрителей. В моем прошлом видео, я во многих местах не вырезал эти две секунды ожидания.
@@Skyentific Я примерно так и думал, просто забавно выглядит)
could you tell us the name of your 3D printer, !
The name is: Prusa i3 MK3, very good 3D printer, but not the cheapest one. For the filament I mostly use PETG from the Prusament.
1:58 rinse and repeat
Show show.