My kit instructions also showed that white wire to the foot switch, but didn’t include enough wires. I’ve seen another build video where they stated that their instruction sheet “X’d” that wire out. Any idea what that wire is meant to do?
My pcb had added circuits so the 2 wires don’t need to be added. I bench tested my pedal and it worked, somewhat. Put everything in the case and now nothing works except the pass-thru tones. Got to troubleshoot.
IMHO it is easier to build if you put all the wires on the case mounted components first. Install them then for the wires you are soldering on the pcb not in all sorts of wonky places
What did it sound like?
Does your volume knob controls only the effect? Mine is affecting the whole signal. Not sure if it's supposed to be this way.
My kit instructions also showed that white wire to the foot switch, but didn’t include enough wires. I’ve seen another build video where they stated that their instruction sheet “X’d” that wire out. Any idea what that wire is meant to do?
wondering the same thing.
My pcb had added circuits so the 2 wires don’t need to be added. I bench tested my pedal and it worked, somewhat. Put everything in the case and now nothing works except the pass-thru tones. Got to troubleshoot.
IMHO it is easier to build if you put all the wires on the case mounted components first. Install them then for the wires you are soldering on the pcb not in all sorts of wonky places
Dors it work? Mismatches in the instructions sheet and pcb marks...k30a exchanged with j201
One 2n3904 is reversed between pcb marks and paper
really very confusing - way too fast, some stuff out of focus, and a few items very unclear.