Lemax Sky Swing Repair
HTML-код
- Опубликовано: 5 фев 2025
- Lemax Sky Swing Repair
Motor is a SRF-300CA or RF-300CA at 11,400 RPM
RJC Website:
www.RandomJunkChannel.com
Facebook:
/ randomjchannel
Gmail:
RandomJChannel@Gmail.com
Thirsty? Try Coffee Brand Coffee
coffeebrandcof...
RUclips:
• 2020 Halloween House G...
Tik-Tok:
tiktok.com/@randomjchannel
Etsy:
www.etsy.com/s...
Tee Spring:
teespring.com/...
Twitter:
/ channel_junk
Great work👍👍 I want to say THANK YOU for helping me out last year for sending me the motor for my Duck Hunt,really appreciate it 👊
Thanks for the very helpful video. Having advanced knowledge of how to dismantle and where to look for the problem is a great help. I my case is it was the turning motor. As soon as I disconnected it, the music started and the LEDs flashed. The replacement has goen in and all is well.
I opened up the dead motor to see what was wrong. There was no grease in it, but one of the delicate 3 fingered brushes had failed and shorted across to the other brush - end of story.
Thanks again - Happy New Year
Strange that the contact broke, I have only opened a few out of curiosity and they had grease in them. Thank you for telling me this, I may open more just to see if I find different failures.
@RandomJunkChannel the rotor is a great spinning top, it runs for ages.
Had a very similar problem with my Giant Swing, your video was very helpful although its now clear that the upper banner boards don't need to be removed to access the motor and cogs. I've ordered a few RF300 motors, waiting for their arrival now...
Glad it helped
Hi!! I'd like to ask for your help with my noisy sky swing. I dismantled thanks to your video and I cleaned.the result is a little better but it still makes noise. I hope you can help me. Thank you very much
Where is the noise located (if you can isolate it)? Top, middle or bottom.
Check for the base rubbing around the base, is common on a lot of carousels
Thank you very much for your replay. I think the noise is in the middle, now it's quite acceptable, but I have another problem now, the wires on the middle plane get twisted when the carousel turns. the wires from the motor of the last rubber band to the central chip board. I'm losing my mind.
Nothing, it's dead😅
Great job👍
Hi, thanks for the video, a question if i may, where would I source a new drive band or whatever the black oring part?
I buy the belt kit from www.skullkrane.com/accessories
I need to repaur the same Lemax Sky Swing that stopped working. Like your video I noticed light issues and then i heard the same noise that i hear in your video and the swing is stuck out. I want to purchase a motor but in your page hear you write the motor is 11,400 RPM. That seems really high, did you mean, 1,140 RPM
Nope, it is an SRF-300CA or RF-300CA at 11,400 RPM. It needs the speed so the gear box can slow it down and convert it to torque. The average speed for that size motor is just over 12,000 RPM
What are the red things you placed over the repaired wire ?
That is heat shrink. It comes in a variety if colors and sizes.
Hello, I am interested in having several lemax pieces fixed, can you help me?
Sure can. you can email me with the pieces that you are having issues with and their associated issues.
RandomJChannel@gmail.com
Hi are you in amercia? Please reply back mine doesn’t have sound or not going down the baskets are not can you fix mine for me if in the Uk
I am in the U.S.A. It sounds as if your motor is shorted out. If you open it and unplug the motor, the lights/sounds should return. The motor is a basic hobby motor and pretty easy to acquire.
I need a SRF-300CA to replace the motor in my lemax piece, but I can't locate SRF-300's. There are lots of RF-300 motors I can buy, but not SRF. Do you need to use SRF, or can you also use RF motors?
Either as long as it is 11,400 RPM
@@RandomJunkChannel thank you so much!
Brother good night day, brother happy cristmars , ha0py and Jumper in one .log ,
Happy holidays!