Daaaang, you haters gonna hate! Yeah, it was more than annoying that there was no money shot. Buut, y'all need to understand two things: the water content of any type of cement, mortar, plaster, mud if you will, is relative to the environmental conditions during construction, cure & usage as well as the purpose of the object; annd, using one's foot to hold a straightedge (or to perform other tasks) is no more or less dangerous than using one's hand, iff one has practiced carefully enough and long enough. No worries, I need no chaange back from my two cents. 😉
I wish there was some explanation of what you are using to make this machine/tool with. I can see the PVC but is that plastic or metal or what is that other part and what type of tape or whatever you used on it. Also how long does it take for this pot to dry how many layers do you put onto the thing? How long do you wait between layers?
First use screws instead of tap for templet put some grease so the cement does not get stuck and at the end put some kind of plate so you do not have to do the scraping at the end
@@DaleDix 😂😂 he was very cheeky (or nonsense) to post something like that...LOL He even didn't show how he took that from the ground. Actually I don't believe he was able to lift that up
He is an able craftsman you have to keep it for 24 hours for drawing and you will find a very nice product using very simple to use and inexpensive to try to understand the procedure
Could I give an advice? Please improve your security methods of work... don't cut any material with you foot so near! Or use safety shoes... It's so dangerous... and I mechanic... it means I know a little about it! Well done... beautiful and exact shape!
As a bigger myself I found this video the more he was trying the more he was distroying he should lifted a little as he was on t hue cement it's to thin layer it will not last it's a shame but good try.
No wire/repar type of support in the build = busted pot down the line. Electrical tape to hold the template? May work for this guy on his 1,000th pot but there are better options to make a pot for you folks at home that are no more difficult. Check out Sony Le on RUclips.
Finally he give up and didn't share the final results 😄 Do you really think we have this much time to make a single bowl which worth is not more than 2 or 3 bucks?
Great template teaching . Thank you so much for your video.
Hola! ✌🏽Saludos desde Mexico 🇲🇽🔥💎
Good video because I finally learned how to make the circular shaping mechanism
You make it look so easy
Ahah! Now I know how to make bowl jig. Thanks.
‼️❤️VERY NICE ❤️‼️
very nice, would have like to seen it sitting up-right!
That's an easy way of making a tool thanks a lot . I was looking for a video on how to make one...that makes pot making so much easier ..
Sir..really nice. May I request u to give ur mob. No so that I can talk to u in details.
Excellent creativity, I love the simple design and form of the tool used to make such a beautiful pot.
Muy bueno el video, gracias por compartir con nosotros su conocimiento.. Saludos desde Paraguay
Sou do Brasil. Brigado sua ideia é muito boa
very nice and is simple to do it thanks alot
Ficou top 👏👏👏👏
Que material é esse do gabarito?
aluminum composite material
Daaaang, you haters gonna hate! Yeah, it was more than annoying that there was no money shot. Buut, y'all need to understand two things: the water content of any type of cement, mortar, plaster, mud if you will, is relative to the environmental conditions during construction, cure & usage as well as the purpose of the object; annd, using one's foot to hold a straightedge (or to perform other tasks) is no more or less dangerous than using one's hand, iff one has practiced carefully enough and long enough. No worries, I need no chaange back from my two cents. 😉
El mejor explicado bendiciones
Very good and easy to follow video, thank you
I only have two toes left, however I still have all of my fingers except three.
Did you use sand or dirt for your mold. Does it make a difference what you use for the mold
Use damp sand , so it can stick to itself and hold its forum !
Excellent!
A beautiful thing
I wish there was some explanation of what you are using to make this machine/tool with. I can see the PVC but is that plastic or metal or what is that other part and what type of tape or whatever you used on it. Also how long does it take for this pot to dry how many layers do you put onto the thing? How long do you wait between layers?
Great vid
Can you send me a measurement of the temple u built
Where is the final result ??
ruclips.net/video/HLkiZ22TLGM/видео.html
The final result : the pot died 🤣😂
Топ! то самое видео
me encanta la tecnica . excelente
秀樹感激Goodです=3
We watched and didn’t get to see the finished pot. Really really disappointing.
waiting for part 2 ....
14 minutes of video and you cut it right im the end... what the hell...
مان گٸے استاد تیرے جگاڑ کو 😂😂😂😂😂😂❤❤❤
Where info on supplies or anything?
Muito bom👏👏👏👏
show the final pot but or it was not well
how many mm is the aluminium composite sheet?
Is that mud or sand
Что за материал Вы в начале ролика отрезали?
Essa montagem deu nó na minha cabeça, mais tenho q aprender,ficou lindo
Didn't show the finished product
Hasta yo aprendi tambien
Indah sekali
Incrível !!!
Parabéns !!!
Bom dia por favor diga me a medida desse gabarito
very nice,thank's
I will buy rather thanks 😁
First use screws instead of tap for templet put some grease so the cement does not get stuck and at the end put some kind of plate so you do not have to do the scraping at the end
Amazing
Are you serious? What is amazing???
@@ninadelisboa That they had the audacity to post it?
@@DaleDix 😂😂 he was very cheeky (or nonsense) to post something like that...LOL
He even didn't show how he took that from the ground.
Actually I don't believe he was able to lift that up
He is an able craftsman you have to keep it for 24 hours for drawing and you will find a very nice product using very simple to use and inexpensive to try to understand the procedure
Drying
Could I give an advice?
Please improve your security methods of work... don't cut any material with you foot so near!
Or use safety shoes...
It's so dangerous... and I mechanic... it means I know a little about it!
Well done... beautiful and exact shape!
Can't see the inside of the pot.
great.
Where''s the fing pot?
Although it never showed the end product, it should have ended much sooner.
Final result: It broke when he tooks it off the ground
🤣👌🏻
I would have paid money to see that.
That would have justified wasting our time.
Comparison of sand and cement please?
First things you use need to put on screen what size all the tools and name
What type of sand
sharp builders sand, as it holds together better.
What was that? Pure waste of time. Where is end product? Why do you make such videos ?
Can you please give me the measurements ?
Cadê o final do negócio??
No final, quebrou quando ele tentou tirar do chão...kkkkkkkk
As a bigger myself I found this video the more he was trying the more he was distroying he should lifted a little as he was on t hue cement it's to thin layer it will not last it's a shame but good try.
Probably a million videos in here showing faster ways to make a nicer bowl.
this is the most intense making of a concrete planter on YT.
That is a very careless way to cut. It’s an accident waiting to happen
Queria como fazer a ferramenta para fazer o vaso
You did no finish
रामसजन राजभर
Sharp Knife + Toes = No Toes
😀👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻🙏🏻🥰🇧🇷
Mixing that much water into the cement will weaken it too much- it won't last- great effort though!
But what was it?
supposed to be a pot, it probably fell apart when he picked it up because it was a stupid idea.
Wow. An accident waiting to happen
Verry long time
Гениально босую ногу использует
Me fumé todo el video y no muestran como queda?!!!
😂
Very bad way to end.
No wire/repar type of support in the build = busted pot down the line. Electrical tape to hold the template? May work for this guy on his 1,000th pot but there are better options to make a pot for you folks at home that are no more difficult. Check out Sony Le on RUclips.
Meh.
Waste of time. Tysm🙏🏻
Чем все закончилось ?(
Они поженились и жили долго и счастливо.
still inexperienced - too inexperienced.
Finally he give up and didn't share the final results 😄 Do you really think we have this much time to make a single bowl which worth is not more than 2 or 3 bucks?
⁹город жоб
Kém
Que
No sirvió!
watch them toes
What tha fuck!!!!! Watching the whole entire video and there is not result??? This video should be taking out of RUclips
บ😮คึ_🎉จ
Come here, i want to teach you how to make it very simple that you .. 😂
Ну и дерьмище..
watch those toe's.......