THANK YOU THANK YOU THANK YOU ! Didn’t expect it to work, but my locking button is working again ! Sprayed, pressed a few times, sprayed some more and pressed at the bottom of the button, and all of a sudden life returned 🎉
True. Innovations used to debut in S-class. Certain safety features debuted in W213 E-class and then made it to w222 S class. Maybe they were “testing” it? :)
Hi, thanks for the tip! You forgot to mention that the keyless entry should be fixed first, then use the silicone spray to prevent water from getting in 😂🙌🙌
Hehe! Could you make a video how to dismantle and fix the dead sensors, please? I found the cracks in the rubber which let water in, but i guess something inside burnt or a cable died. This would be fantastic! Thanks!
I took mine to 4-5 electronic repair shop and they all refused. I tried to open it up myself. There is no way you can open it up without destroying the look of it. It’s not designed to be opened. There is a RUclips video on how to fix it, but the outcome will not look as nice as new.
Great video and tip! So simple but it seems to be so effective, never would think of that! I repaired mine but basically at the first wash it started going crazy. I'm going to replace mine and try your tip! Thanks :)
I kept replacing them until I started doing this. I keep one of this cans in my trunk and spray occasionally when I remember. It helps. I hope it helps to preserve your keyless too. How did you repair? I tried opening it up and fixing and it looked ugly :) Also, if you’re from the US feel free to participate in the giveaway.
@@AccentOnCars I really hope too! I removed all the circuit and made "my own one", basically everything replaced, switches and wires (resistors are often reusable). The problem is the fact that it's almost impossible to isolate it really well, even if you can isolate it from water, condensation will certainly get inside :/ Unfortunately I'm not! :( I'm from Europe, Portugal :)
I have a keyless go card on my cl and that has stoped working do you think that water going in that handle switch can not make it recognise? To the car
Are you saying the car won’t recognize the key to start it up? If yes, then the door handle should not affect whether the car identifies the key or not. That could be more antenna related.
@@AccentOnCars The card used to open the doors and start the car but recently the card has stoped showing a light and it says chip card not recognised Where is the atena?
Hello. Could you please help me? Today I've replaced the driver door handle on my 2006 cls55 w219 and now if I push the knob on the door handle the door pops to open. Instead of closing the central lock. And if I push the long button behind it close the central lock insted pop the door. Let's say the Open and close function switched? Mechanically it sems like works perfectly. Before I replace it, it was worked in the right way. The only reason why i replace the door hanndle was because small knob stop working. How I can fix it myself? Thank you.
hi, so what to replace after they failed? all of them has been failed on my 2003 mercedes e500 7 years ago, but lock and unlock using the remote still fine, That's why it wasn't a problem for me that should be fixed right away, but now when I intended to fix them I've scanned the vehicle and my scanner shows that i has bad control module's on all four doors and I don't trust it because everything on the doors works except the keyless-go, Any suggestion will be appreciated
Hi. The control unit error might indeed be false, but I am not sure whether faulty handles trigger any codes or not. You can inspect all handles visually. If there are minor cracks around the plastic on the front or on the back then chances are they’re faulty. I’d replace one handle and see if it works. But I read MB doesn’t sell painted handles anymore.
@@AccentOnCars thanks for the reply, I don't see any cracks on them but the thing is this happened after I've left the car in the backyard for 5 years straight without drove it due to air suspension problems and the silliest thing was that I left it under all weather conditions without cover, I live in Michigan we get very cold weather and a lot of snow in winter and extreme hot in summer. I've noticed even some sunburn spots that have exposed to the sun the most and some of the windows rubber seals has become brittle
Replacing the sensor is very hard because it’s very hard to open up the shell without ruining it. You can replace the door handle and it’s somewhat easy. You will need to remove the door panel and undo two screws. I did it on mine.
@@AccentOnCars Thank you. Please can I also ask if you have come across the following problems. Radio not available but everything else e.g. SatNav is working fine. Boot handsfree opening suddenly stopped working but you can open it with the key. Thanks.
Sorry to hear. Unfortunately, I can’t know what is the problem without scanning. Your problems are electrical. Try forums. Maybe someone have had exact same problems.
If the switches are gone bad you’ll have to replace the whole handle. The push button can also be replaced, but I’d scan to find if there are any other issues with it.
That’s correct. I realized I could be misunderstood when I said 2007. But I was specifically talking about E63. MB was and is an innovative company. If you like the content I hope you can subscribe to support the channel if not already. Thanks.
Hi, it’s hard to say without scanning it. It could be that the door handles have gone out (very common issue), it could be the keys or smth else. Can you start the car keyless?
@@AccentOnCars Hello. Yes I can start the car just fine by putting the key in and turning the ignition. The lock and unlock features also work just fine. I have a friend that has a scanner, I;ll ask him and see what it shows. Thank you so much. Be safe.
You can order the Liquid Wrench Silicone spray here: amzn.to/3BWPOzX. Also, if you're in New England and want your car to be featured in future episodes shoot me an email at accentoncars@gmail.com
THANK YOU THANK YOU THANK YOU ! Didn’t expect it to work, but my locking button is working again ! Sprayed, pressed a few times, sprayed some more and pressed at the bottom of the button, and all of a sudden life returned 🎉
😎👍 Glad it worked.
azərbaycanlısan qaqam?😂
When you said all I needed was a paper towel, I almost spitted my coffee out 🤣
Keyless entry was available on the W220 S-Class in 1999. I remember trying one with this system back in 2001
True. Innovations used to debut in S-class. Certain safety features debuted in W213 E-class and then made it to w222 S class. Maybe they were “testing” it? :)
Hi, thanks for the tip! You forgot to mention that the keyless entry should be fixed first, then use the silicone spray to prevent water from getting in 😂🙌🙌
Hi, yes. This procedure helps to keep the patient alive. Once the patient has died you can spray all the silicone of the world on it - it’s too late 😂
Hehe! Could you make a video how to dismantle and fix the dead sensors, please? I found the cracks in the rubber which let water in, but i guess something inside burnt or a cable died. This would be fantastic! Thanks!
I took mine to 4-5 electronic repair shop and they all refused. I tried to open it up myself. There is no way you can open it up without destroying the look of it. It’s not designed to be opened. There is a RUclips video on how to fix it, but the outcome will not look as nice as new.
Great video and tip! So simple but it seems to be so effective, never would think of that! I repaired mine but basically at the first wash it started going crazy. I'm going to replace mine and try your tip! Thanks :)
I kept replacing them until I started doing this. I keep one of this cans in my trunk and spray occasionally when I remember. It helps. I hope it helps to preserve your keyless too. How did you repair? I tried opening it up and fixing and it looked ugly :)
Also, if you’re from the US feel free to participate in the giveaway.
@@AccentOnCars I really hope too! I removed all the circuit and made "my own one", basically everything replaced, switches and wires (resistors are often reusable). The problem is the fact that it's almost impossible to isolate it really well, even if you can isolate it from water, condensation will certainly get inside :/
Unfortunately I'm not! :( I'm from Europe, Portugal :)
Oi Portugal 🇵🇹 I will have giveaways for all the followers of the page in near future including international ones :)
@@AccentOnCars That would be nice! :)
2005/2006 Toyota Yaris has keyless entry too, might be even older but those are the only 2 I know of for certain
Keyless entry debuted on MB S class in 1998. But even in 2007 not that many cars had it. Didn’t know about Yaris. That’s surprising:-)
@@AccentOnCars yeah, thanks for the video mine started acting up a week or so ago, so I’ll try your method 😁
@@AccentOnCars i had nissan micra 2003 with keyless go system now have juke with same
I was told my keyless go offline is it possible one of the fobs caused that with programming?
Thank you. I do this and so far so good. No broken handles
Glad it helps you:-)
Keep going you can be big bro
Thank you:) I hope you can subscribe to support the channel if not already.
AccentOnCars already done ;)
Did you enter the giveaway? Just want to make sure you saw that video :)
I have a keyless go card on my cl and that has stoped working do you think that water going in that handle switch can not make it recognise? To the car
Are you saying the car won’t recognize the key to start it up? If yes, then the door handle should not affect whether the car identifies the key or not. That could be more antenna related.
@@AccentOnCars
The card used to open the doors and start the car but recently the card has stoped showing a light and it says chip card not recognised
Where is the atena?
Würth Silicone Sprey is also helpful?
Don't know. Haven't used it.
Hello. Could you please help me?
Today I've replaced the driver door handle on my 2006 cls55 w219 and now if I push the knob on the door handle the door pops to open. Instead of closing the central lock. And if I push the long button behind it close the central lock insted pop the door. Let's say the Open and close function switched?
Mechanically it sems like works perfectly. Before I replace it, it was worked in the right way. The only reason why i replace the door hanndle was because small knob stop working. How I can fix it myself? Thank you.
Hmm. Very strange. Try unplugging the switch and flipping it 180 degrees.
hi, so what to replace after they failed? all of them has been failed on my 2003 mercedes e500 7 years ago, but lock and unlock using the remote still fine, That's why it wasn't a problem for me that should be fixed right away, but now when I intended to fix them I've scanned the vehicle and my scanner shows that i has bad control module's on all four doors and I don't trust it because everything on the doors works except the keyless-go, Any suggestion will be appreciated
Hi. The control unit error might indeed be false, but I am not sure whether faulty handles trigger any codes or not. You can inspect all handles visually. If there are minor cracks around the plastic on the front or on the back then chances are they’re faulty. I’d replace one handle and see if it works. But I read MB doesn’t sell painted handles anymore.
@@AccentOnCars thanks for the reply, I don't see any cracks on them but the thing is this happened after I've left the car in the backyard for 5 years straight without drove it due to air suspension problems and the silliest thing was that I left it under all weather conditions without cover, I live in Michigan we get very cold weather and a lot of snow in winter and extreme hot in summer. I've noticed even some sunburn spots that have exposed to the sun the most and some of the windows rubber seals has become brittle
How do you replace the sensor once it has broken. Do you have to take it to a dealer or is it a simple job that you can do yourself? Thanks
Replacing the sensor is very hard because it’s very hard to open up the shell without ruining it. You can replace the door handle and it’s somewhat easy. You will need to remove the door panel and undo two screws. I did it on mine.
@@AccentOnCars Thank you. Please can I also ask if you have come across the following problems. Radio not available but everything else e.g. SatNav is working fine. Boot handsfree opening suddenly stopped working but you can open it with the key. Thanks.
Sorry to hear. Unfortunately, I can’t know what is the problem without scanning. Your problems are electrical. Try forums. Maybe someone have had exact same problems.
@@AccentOnCars Thank you
Another good video 👍🏽💪🏾
Appreciate it
Mine has failed already on driver door after 1 month of ownership. What does the dealer charge to fix this?
If you’re in the States then about $500. You can buy the part (make sure color matches) for about $250 and replace yourself.
Good video. Thanks for the video
Thanks for watching!
just ordered new buttons.. my push to start doesnt work in my w220 what do i do?
If the switches are gone bad you’ll have to replace the whole handle. The push button can also be replaced, but I’d scan to find if there are any other issues with it.
Is that spray like WD40
Yes, it’s a spray. But it’s not WD40. I wouldn’t use WD40 on it.
@@AccentOnCarsi was about to ask can i use wd40🙈
Keyless entry came out in 2002 when the first W211 came out.
That’s correct. I realized I could be misunderstood when I said 2007. But I was specifically talking about E63. MB was and is an innovative company.
If you like the content I hope you can subscribe to support the channel if not already. Thanks.
I think it came out in 96 in the S class.
I have an e350 2008 and keyless entry on the doors don’t work. Any sugestiones on how to fix it? Thank You.
Hi, it’s hard to say without scanning it. It could be that the door handles have gone out (very common issue), it could be the keys or smth else. Can you start the car keyless?
@@AccentOnCars Hello. Yes I can start the car just fine by putting the key in and turning the ignition. The lock and unlock features also work just fine. I have a friend that has a scanner, I;ll ask him and see what it shows. Thank you so much. Be safe.
Keyless go. Keyless entry is a radio fob.
You’re right. MB branded name is Keyless Go.
You can order the Liquid Wrench Silicone spray here: amzn.to/3BWPOzX. Also, if you're in New England and want your car to be featured in future episodes shoot me an email at accentoncars@gmail.com
Update after 3 years: the keyless entry still works on my car. I keep spraying it once a month or so.
Lexus have from 2005 on is ))) s class only after
Wrong. MB had the system since 1998.
Türk müsün abi
sell that trash and get your self real car get Lexus or toyota
a toyota plastic car !