Would like a 10 inch mcs barrel m22x.75 to match your suppressor adapters to this platform , I have a veper fostech and kel tech in this thread pattern already the 10inch mcs barrel cannot be rem choke threaded due to whare lug sits on mag tube
Noice so is this barrel spec issue a gun by gun thing or if I have a Remington 870 are the barrels all going to be the right spec? Seems like external threaded way to go so you can remove it if needed? I want this. I have standard Remington 870 I want this on you guys think I’m safe with external threaded?
For the most part yes, we've seen varying tolerances from various manufacturers, but Remington has been pretty good. External Threads are the strongest. to externally thread, you would need to take some measurements, that information can be found on our website.
Can you external thread a Mossberg 590a1 retrograde 12 gauge to receive a flash suppressor? Im assuming if so, the front sight will have to be moved back??
Yeah the front site will be in the way. it will most likely have to be romoved on your shotgun. everything else should be good as long as your barrel diameters are good to go.
I have a vr80 12ga shotgun which is threaded on the outside and inside of the barrel. could I just thread one of the suppressors on or would I need to use the inside thread to put one on?
We should be able to. Here is the link with all the info regarding Barrel Threading, What we can and can't work with etc. jkarmament.com/products/shotgun-barrel-threading/
We can do it, but the M4 has to be externally threaded, You can find our barrel threading services here: jkarmament.com/products/shotgun-barrel-threading/
Brock's 'stache is on point 💯
Its the best
No country for old men lol. No seriously thanks for this vid clears a lot up!
Absolutely! More info coming. 🇺🇸
exactly! and you're welcome! glad it was helpful
Sick!!!!
yes sir!
How about the Mosseberg Shockwave barrel?
yes we definitely can! it will use a 7/8x32 OBMD jkarmament.com/products/shotgun-barrel-threading/
yes we can! it will be a 7/8x32 OBMD - jkarmament.com/products/shotgun-barrel-threading/
@@jkarmamentsuppressors Thank you.🇺🇲
Would like a 10 inch mcs barrel m22x.75 to match your suppressor adapters to this platform , I have a veper fostech and kel tech in this thread pattern already the 10inch mcs barrel cannot be rem choke threaded due to whare lug sits on mag tube
Can you use this on a smaller gauge shotgun i.e 20 gauge?
Negative, we will do a 20g model eventually. We have had a lot of interest.
Not currently recommended for 20 gauge use.
Noice so is this barrel spec issue a gun by gun thing or if I have a Remington 870 are the barrels all going to be the right spec? Seems like external threaded way to go so you can remove it if needed? I want this. I have standard Remington 870 I want this on you guys think I’m safe with external threaded?
For the most part yes, we've seen varying tolerances from various manufacturers, but Remington has been pretty good. External Threads are the strongest. to externally thread, you would need to take some measurements, that information can be found on our website.
@@jkarmamentsuppressors can do what do I need caliper set?
Can you external thread a Mossberg 590a1 retrograde 12 gauge to receive a flash suppressor? Im assuming if so, the front sight will have to be moved back??
Yeah the front site will be in the way. it will most likely have to be romoved on your shotgun. everything else should be good as long as your barrel diameters are good to go.
I have a vr80 12ga shotgun which is threaded on the outside and inside of the barrel. could I just thread one of the suppressors on or would I need to use the inside thread to put one on?
we recommend putting one of our shotgun muzzle devices on the outside of your shotgun. the suppressor threads onto the muzzle device
What’s needed for a Beretta 1301 Tactical to run your SBSX Breacher?
Just our CRMD (choke replacement muzzle device) in the correct Beretta size so you can mount the SBSX on the end.
590S 18.5" possibe for external?
You'll need to know the outer diameter of your barrel. you can send an email to us at support@jkarmament.com and we can answer your questions there!
Have you figured out the offering for benelli m4?
only if its externally threaded, here is more info on our threading services: jkarmament.com/products/shotgun-barrel-threading/
I have a itchaca 37 hog slayer with a riffled barrel , would y’all be able to thread that barrel?
We should be able to. Here is the link with all the info regarding Barrel Threading, What we can and can't work with etc. jkarmament.com/products/shotgun-barrel-threading/
M4 tactical external thread and be moved front sight. How much do I need to pay?
We can do it, but the M4 has to be externally threaded, You can find our barrel threading services here: jkarmament.com/products/shotgun-barrel-threading/
What about a Kalashnikov Komrad?
We have a Suppressed Kalashnikov KS12 running our Shotgun Cans. or are you asking about rifles? for those we run our SBRX
Yes the Kalashnikov Komrad 12 Gauge@@jkarmamentsuppressors