PC Build - Liquid Cooling Upgrade (~72 USD chinese liquid cooling kit)
HTML-код
- Опубликовано: 6 сен 2024
- Please like and subscribe!
Note: included water block for cpu is not compatible with AMD AM4 socket, need to do some grinding job on it's mounting bracket to make it fit with AMD socket.
CPU Ryzen 5 2600
Motherboard Gigabyte b450m ds3h
GPU OCPC RX 580 4GB (used)
Memory 2x8gb 3600 mhz trident z neo
Storage 1 TB Crucial P1 nvme SSD
PSU Seasonic S12-III 650w 80+ bronze
Case Deepcool Matrexx 55
~72 US Dollar custom loop liquid cooling kit (240 rad w/ fans + pump + reservoir + cpu & gpu block)
Shopee
shopee.ph/prod...
Amazon
www.amazon.com...
Aliexpress
www.aliexpress...
Lazada
www.lazada.com...
I've got exactly the same GPU block as you have in one of my builds! Though I'm using it as a CPU waterblock and fastened it with zip ties. Cool build!
Dude, you have air problem in your water system. You should switch connections on the top of reservoir. The one with pipe inside reservoir is for water, the other one is for air seal.
Good eye, I didn't notice the pipe on the other fitting.
Hey, just a heads up to make sure you're doing pretty regular checks on your blocks and fittings. I picked one of these up a while ago and the radiator is definitely aluminium, and you don't really want to be mixing Aluminium and Copper/Brass/Nickel, it can damage your blocks. Best bet would be to pick up a new radiator that's copper and 2 more fittings. Great video though
actually all you have to do is use an ethylene glycol based antifreeze that advertises low silicates and make a 20-30% concentration of antifreeze to distilled water ratio fluid that will protect the metals from each other like it does in cars. You will need to change tubing to radiator hose/tygon/EPDM rubber etc black rubber type tubing because the antifreeze will turn the soft tubing hard and brittle, besides clear soft tubing like that is trash because itll leach plasticizer into the loop that collects in the blocks as goo.
Awesome job mate! Only 1 small thing i would change ... i would run the line from the pump outlet (pressure side) to the radiator, so that its cooled right before it goes to the blocks. The water going through the pump, slightly heats the water, as it has constant voltage to it, not much, but the cooler you get the water before your waterblocks, the better.
So the water pipe out of the pump, goes to the radiator, and on the other side of the radiator, i would put say a 2 - 3" rubber hose, going into a "T" splitter, so now you have 2 cold outlet pipes. Now run 1 to the inlet on the CPU water block, and the other pipe to the intake on the GPU water block intake.
See the way you have it plumbed now is, the water is slightly warmed as it goes through the water pump, then into the GPU water block, getting hotter, and then into the CPU block where it gets even hotter!
Oh man, a great thanks !!! I wanted to buy this kit but i did not find a tutorial for build that !
Balls of a man to trust this with a pc nice
risk is worth it man
Yeah he got some freaky big one's lol.
I kind of satisfying to watch this for me.
you guys do know that the screws aren't in the holes on the cpu mount right? You can see it at 11:15 the best
yeah the cpu block doesn't fit the am4 mounting holes. need to do some grinding
Nice build, just wondering if you topped up the liquid afterwards? There is quite amount of air in that loop that may affect cooling quite a bit.
Im a newbie. I wanna ask what happen if i put too much water in reservoir?
@@kuyuntut88 It won't hold more water than the loop can handle.
I also did it before 4 or 4 years ago.Sadly before one year the pump died and i could never again find such a silent one,but it still works great!
You can use oil colling resorvoir holder as D50mm resorvoir holder. It is about 8€.
How much liquid do you use? Just to fill the tank up? Thanks for the video only thing I found this.
@@est495 lol I could care less about the expense. I’m worried about performance.
Nice job on the cooler and excellent shooting.
I bought this same kit but am only using the gpu block and It doesn’t seem to flow it’s on a 750ti and I’m using the t1000 coolant I was able to play about 30 seconds of a game and it would overheat and I’d get black screened now I can play through for about 15 minutes and it over heats but watching this video my cooler doesn’t look like it’s flowing even 10% of yours
Your explanation is really
understandable
Nice vidéo ! I bought the parts to do the same thing but never got around doing it! Your temps look perfect and just with a 240 for both cpu and gpu!
You can do it!
jay dj Where did you buy this
It's $30 more now because of the demand. Great addition to the case, thanks for the video, very informative. You can also add color to the water as well, that would be nice. Also wanted ask can the water pump be slowed down or sped up?
yeah just buy DC speed controller board. something like on this link shopee.ph/-Ready-Stock-PWM-DC-Motor-Fan-Speed-Controller-6V-12V-6A-High-Power-Stepless-Switch-New-i.302192966.5158150398
This reservoir seems to be causing a lot of air in the system. Does the sound of pouring water bother you?
Planning to buy the same one but I’m getting a different water pump and fans also a different gpu block
Most critical part that should be compatible are the water blocks
@@jaydj8391 do you think it’s worth the buy ?
@@bingk398 since it's working for my set up maintaining my cpu and gpu temp at 45degC max, it's definitely worth it.
@@jaydj8391 will the gpu water block fit 64mm x 64mm
@@bingk398 you have to confirm this with the seller
A dope video ever! But, we would really love to see you fired up both cpu n gpu on stress test! Let see how they catch up
what software can use that stress test both cpu and gpu at same time?
@@jaydj8391 there are bunch of em like aida64, cinebench r15, prime95, blockbench. I personally use aida64 only cause not doing extreme overclock.
@@Hackerszz09 cinebench r20 temp is 56 degree celius
@@jaydj8391 oh wow thats great! Ice cool
@@Hackerszz09 answered my question on how is the temp this product looks like it works pretty great for the price they showing it for not bad for a budget build
bravo man !! amazing job !!!
Call me crazy but shouldn’t the water go to radiator then components back to pump?? Not radiator to pump then components?
Don't worry you're not crazy, any configuration will work just fine :)
No shit and it held 46-48c radiator last_! lol Think I’m going to try this out from Amazon…
hi man , nice video. i wish to know whether can i use fittings from barrow to connect with those?
Yeah you can use that, but for the radiator it came with welded barb fittings
Hi is your pump noise, i have the same is very loud on 5v (vvvvvvvvvvvvv)
i'm not really that sensitive to the noise. as long as it maintains my cpu's and gpu's temperature below 50 degC but yeah it is quite noisy.
i got a kit similar to this but havent installed. trying to research as everybody says different things in videos. right now im tryin to get typical schematic for the exact kit i have. my reservoir is a tube like yours 1 hole at the bottom but 3 at the top. out of those 3 theres 2 on the side of the top cap and 1 directly on the top. one of these has to be a fill hole. my kit came with zero instructions/schematics. im undecided to mess with the GPU. i think for now id want just the cooling for the CPU. should be easy to figure out. i might have to buy caps to plug one of those reservoir holes? i only got this kit because the res has a cool looking red tube twist inside of it.
bro 45°C on the RX580 are great. mine with the stock cooler gets to 75°C
Hi, how did u flush the water when service/cleaning the water cooling system once a year?
very tedious, i had to remove all the blocks so that i can drain it safely. one good practice that i can suggest is that you add drain/refill port/valve.
Hi, quick question, about the gpu, you don’t need to put the mini heatsinks on the thermal pads?
I didnt put any heatsinks, I just have a fan on the bottom directly blowing air to vrm and vram of my gpu.
Is this good for a beginner I've never made custom loop. Is all the parts available on shopee? Also is the pump still working?
nice
how to change the
water color like pink water color or green water
not recommending, just use distilled water
Please show the process of filling the liquid..
it was pretty bad that's why it's not included
bro im going to buy this. are there any leaks?
how long hv you been using this and is the radiator copper?
no leaks issues since may 28, 2020. radiator is aluminum not copper.
Wala ba problema na distilled water lang nilalagay? Iba kasi nagsasabi mag rust daw..
and what about those VRM's that has no cooler ?
i love it
Why did you not give your GPU a separate radiator? You are taking heat from the GPU and passing it through to the CPU. You could get your CPU cooler if you Y the output of your water pump and have separate radiators for the CPU and GPU.
los metales del kit deben ser los mismos para que no se cree corriente galvanica que corroe oxida y desprende oxido de aluminio del radiador a todo el circuito tapando todo
it would probably take many years for galvanic corrosion to take place since both copper and aluminum materials are not directly in contact with each other
Vrams arent cooled ????
Dapat sa taas ung fan ng radiator hindi sa baba ng radiator.
If dapat lang ang labanan then go for push and pull config 😊
Please add a fan over the vrms (GPU)
Bro i have a problem, Can you help me
I have the same water pump but super noisy, Im scared maybe mg cpu will be damage. Can you help me bro pls
Yo, I imagine you sorted this out by now, but it's just a loud low quality pump and it's always running at full speed. I modded a Molex splitter to give it 7 volts instead of 12, just google 'molex 12v to 7v'. It was pretty ghetto-mod and I don't really recommend it, but It did make it much more bearable though.
Kd os BR?? tô pensando em comprar.. vcs acha q dá bom??
How much improvement after?
from 60-65 to 40-45 for temps
What's the size of the screw fittings you used to hold the cpu water block in the motherboard bro?.if you know please reply me fast!
Sorry for late response, use any n4 screw that works. Hope that helped 👍
Is your GPU fan header just empty?
might wana cool those vr ram theres a reason there cooled with the stock cooler
Yeah it's air cooled using the stock fans
@@jaydj8391 did you sort the bubbles going through the loop as well? I have a lot coming with a flow indicator and an extra radiator for between the gpu and cpu with better quality o rings.
@@dr_fishy9893 i'd just done continuous loop cycling after filling distilled water to get rid of the bubbles.
@@jaydj8391 any vissable corrosion or has it held up well?
@@dr_fishy9893 on the copper fittings connected to aluminum radiator but its just minor
hey me again what are those little plugs on the radiator called?/are they necessary?
Barb fittings clamp, it's necessary to properly secure the tubes connection to the fittings.
Bro okay ba ito sa GTX 1080? salamat
Do not use these hose clips. They aren't adequate
good video
Glad you enjoyed
how much is water cooler kit
have you ever had leak issues with this kit?
None ever since
nice video
I wonder, will this GPU waterblock work for RX 6700 XT? It's the same diamond shape, but a little larger....
Edit: Actually you don't have to answer. The die Size is 18.31 mm × 18.27 mm ≈ 334.52 mm². The screws on the bottom of the cold plate are 290mm apart. This waterblock would be amazing for 335 mm² die size.
I won't recommend, unless you already thought out how you are going to cool down the vrms and vrams
@@jaydj8391 I have aluminum heatsinks. Small ones for the VRMs and larger ones for the VRAM. Question is, will that be enough? How hot is the GDDR6 16Gbps....
@@WhiteSkyMage wouldn't recommend doing this with a cheap AliExpress water cooling kit. Just get a proper EK water block if you want to go water cooling. Ik it's expensive but ensures that Ur parts are safe. I'm gonna do this with a gtx 680 so no risk if I break it as it's about 30$
@@ascalt7868 Then i could put this on a rx 580. That one is cheap enough to experiment on
@@WhiteSkyMage yh wouldn't do this on a 4090 for example lmao. I might do this with my 980 rig but imma test the rig with my 680
how do u cool the vrams?...coz the gpu block only covers the core..not the vrams
What GPU u got ?
I have a fan at the bottom of the case blowing air directly to the gpu
hi have you had any leaks so far with this water pump/ reservoir??
None so far sir
how much is the separation of each screw? or gpu slot
i have a rxt 2060
it's not showing on google. maybe you can ask the seller if it's compatible with your rtx 2060
@@jaydj8391 They don't answer me lo :v
Can you measure the distance of the gpu block screws? please
So how they work so far ?? It good ??
For my build , it's beyond good.
Do we need to change the water in a week or a year ... Or not pls reply
maybe twice a year depends on the quality of the water inside the tubing
How good is the Build Quality of water block in terms of durability, can we expect any leakage?
as long as you are using correct material sizes for o-rings, fittings and tubings and are properly installed, then expect that it will not leak.
@@jaydj8391 thank you so much for replying, I was willing to buy one, but later changed my mind to go with air coolers to be on safe side.
Walang biocide distilled water mo sir? Wala naman nag bubuild up sa loop or sign or corrosion?
wala sir, as much as possible pure water para hindi magcause ng electrolysis which can accelerate galvanic corrosion kasi im using copper for my water blocks and aluminum for radiator. so far may minimal sign of corrosion sa copper fittings ko na nakakabit sa aluminum radiator. since im using clear soft tubing nagkakaroon ng growth ng algae kapag expose sa lights, palit distilled water nalang ang ginagawa ko.
Quick question, Does this work well?
yeah definitely! from 60-65 degrees to 40-45 degrees
Hi, do you know the size of the tube? for tube fitting purposes :) TIA
depends on the fittings that you're going to use. mine i use 9 mm inner diameter and 12 mm outer diameter.. also 8 mm inner diameter works as well.
Whats is vga
How's it holding up now?
pretty damn good
10:33 face reval?
bro pwede malaman ano ginamit mong coolant?
Distilled water lang sir
coolant to be used..
Distilled water
lol. you did not test for leaking
Musta na to boss after 3yrs? Balak ko din bumili nito.
Buhay pa sir, hindi ko nalang nagagamit yung gpu block kasi nag upgrade ako ng rx 6800xt
@@jaydj8391 Yown salamat sir!
How did you attach the pump to the Reservoir?
threaded fittings, male to male
@@jaydj8391 Thanks man, were they included in the kit?
@@maxkomor6505 yeah it's included
Kamusta sir, buhay pa yung loop na to? At ilang beses ka nag maintenance?
Buhay pa din, dalawang beses palang nung nag add pa ako ng isang radiator and nagpalit ng case
@@jaydj8391 Solid, nakaka bilib yung pump, ineexpect ko unang mamamatay dyan e yung pump haha.
Samanatalang yung nabili kong ddc pump nh freezemod puta d man lang tumagal ng 3 months
@@Gabo99 ito ok naman hindi variable yung pump speed nya kaya idle or full load yung cpu and gpu naka 100% all the time. Temp naman nya same as before pa din 40-45 degC at full load
Does the cpu block fit socket AM4?
no
@@felixemanuelle3464 Oʜ Cᴏᴏʟ
nooo amigo y las vram ahhhh
I ordered from banggood about an hour ago but I'm curious. Are you satisfied? otherwise i will return it.
very satisfied
@@jaydj8391 Thank you so much friend🙂❤🙏🏻
@@jaydj8391 One more question, does the liquid come in the box or did you have to buy it separately? It will come in the coming days, so I want to order it already? 🙂
@@ataolcam311 none, just use distilled water
Did you clean and flush the radiator?
Oh shit! how did i miss that
@@jaydj8391 LMAO
Is the gpu waterblock good for a rtx 3080?
i don't recommend it for rtx 3080, you're gpu's vrm definitely gonna fried
@@jaydj8391 but is it compatible?
@@diegocervantes4977 this gpu doesnt have vram and vrm cooling...3080 will be killed that way very fast
Hye sir. Can i use this for rtx 2060? How about the vr ram?
not sure, check first the mounting holes of your rtx 2060 if it fits the included gpu block. for cooling the vrm and ram you can use the stock fans of your gpu. tricky part is placing it under your gpu so that it will blow cool air directly to the gpu's vrm and ram.
@@jaydj8391 tq so much 🙏
Bad idea
What type of liquid are you using???
just distilled water
@@jaydj8391 thanks👌
My only fear is that it would leak and destroy the computer
Pwede din po ba yung CPU water block sa Ryzen 3 at Gigabyte A320 mobo?
Need po ng grinding works sa cpu block mounting arm na included dito sa kit
Ilan temps before and after bro? Dont mind my name
from 60-65 degC to 40-45 degC
Is it quite ?
yeah
Sir one year na nakakalipas ok ba sya,,,,may pc ako MSI B150 MOTHERBOARD pwede kaya sakin yan
Ok na ok po sir
@@jaydj8391 kaylangan nya ng bracket ,,,may available nmn 115X bracket compatible sya sa cpu and gpu,,,nag benchmark ako ultra setting and high setting,,pinaka nakuha nya temp is 65'c tapos baba sya ng 62 doon lng sya nag lalaro temperature nya,,,tingin mo sir babaguhin ko cooling
Lods pwede ba to sa ryzen 5 3500x + gtx palit 1660 super 6gb
May need ka sir igrind sa mounting bracket nitong water block para magfit sa mounting holes ng mobo mo tas need mo check kung sakto yung mounting holes sa gpu at gpu block
Price Kya hai
What is your case?
Deepcool matrexx 55
is water leak?
As long as you use proper fittings and tubing sizes then you don't have to worry much about it leaking
is the gpu still alive? i see u dont add any heatsink to your gpu's memories
yup, i used the the gpu's fans so that i can cool the vrms and vrams. i'm planning of 3d printing a proper holder for the fans but haven't done yet.
@@jaydj8391 buy alu heatsinks and glue them onto vrams ... Fan alone wont be enough....
@@albertwesker4266 i bought some but haven't installed it yet. I noticed there are no contacts between vrms & vrams and the gpu's heatsink, basically it just blowing hot air to cool the vrms and vrams.
@@albertwesker4266 glue would act as an insulator, dont apply glue to your VRM
@@grayfox7824 thermal conductive glue... Special for heatsinks....
distilled water lang ba ginamit mo boss?
Yes sir
@@jaydj8391 copper din po ba yong radiator? and how about corrosion po?
@@rubioraven aluminum yung rad, so far ok pa naman yung mga water blocks hindi ko lang masabi kung kamusta internal ng rad
@@jaydj8391 thanks boss, concern kasi ako kasi ganyan combo ko sa rad chaka block haha
pwede ko ba palitan yung 120mm nyan?
yes sir pwede, pwede din dagdagan ng radiator kasi custom loop naman sya. be mindful lang sa sizes ng fittings and tubings
sge boss try ko sa susunod salamat. di ko pa kasi na try mag baklas gpu rx 480 gamit ko
make sure may thermal paste ka nakanda and also cotton and alcohol for the cleaning job ng gpu mo
salamat ang init na kasi ng rx480 ko umaabot na ng 85 need ko undervolt para mag 70c lang siya
@@jaydj8391 meron naman ako mga tools yung pag buo alam ko naman yung pag baklas lang ng gpu di ko pa nattry baka masira eh yun lang ba yun tatanggalin yung screw sa backplate?
what was the temp before??
around 60-65 degrees C
@@jaydj8391 that is nice man , is the water cooler still holding up well??
@@sujayagarwal2810 temps now ranging from 40-45 degC
@@sujayagarwal2810 yeah
compatible ba yung kit sa shopee sa a320m s2h v2 at sapphire nitro+ 8gb?
Yung sa gpu compatible yung sa cpu block need unting grinder job
@@jaydj8391 ahh ok2, d ko na itutuloy haha masyadong maeffort na
Wala po ba syang naging problema hanggang ngayon tulad ng pag leleak? or naging problema sa gpu mosfet at vrm
@@games4life737 super tight naman nung tubings sa fittings. As long as hindi nagagalaw palagi yung tubing hindi sya maloosen sa fittings at hindi magcause ng leaks.
Where are you from
Philippines
bro ok lang b kahit yung mismong gpu chip lang? db nagiinit yung vrm ska memory nyan? mahal kc ng full gpu waterblock, anung gamit mong tubig? straight distilled water lang? sabi kc nung iba mag gagalvanic corosion pag straight distilled water lang kc mix metal yan components nyan, may aluminum at copper.
Need lang ng fan na direct blowing air dun sa vrm at vram. Distilled water lang yung gamit ko.
For tubing basta 8-9 mm yung inner diameter
Tnx lagyan ko din ng ganyan ung red devil rx580 ko.malakas uminit pgstock settings lang, kailangan p tweak ang fan curve pra lang ms malamig un nga lang umiingay. Lamig ng sau eh,kuha ako s lazada by parts imatch ko n lng ung size ng fittings s hose.
Pinoy ka bro?
yes sir
i guess screw cooling the rest of the gpu .. lol
Your PC is a budget one right?
Yeah i think so. 40k pesos equivalent to around 800 USD
Noice dude
ano yang grapics card mo boss
OCPC RX 580 4gb