Sorins boring jobs are the jobs we want too see lol. Ty Sorin , any job you do is great 👍 and we’re lucky too have a professional like you helping us out.
Hi Sarin. Am Joe from the U.S.A., and in the State Of Maine. As a degreed and experienced electronics technician, I have made many units of various items work just by soldering cold joints and pins! You are an excellent teacher, and you just need a good inventory of parts, and Digikey and Mouser are excellent distributors! God Bless you, your work, and family! 😊
I bought the ts100 because it had more power. I’m able to solder even car starter wire with it. But the ts80 is more than good enough for smd repairs. I like your vids. Keep going. I learned much by watching you fix things here. I am retired because of health issue and this is a new hobby for me now thanks to your vids.
It's funny to think that some of the best ASMR videos are of some Eastern European guy in the back of a market somewhere in the UK, fixing electronics. Really informative stuff, and he has some great dialogue.
watching your videos is like watching a mystery movie. At the end of the story, you will solved the case. Glad to have found your videos. Though I am an Electronic Engineer, I have long abandoned electronics. Your videos make me realize , not to waste the electronics knowledge
hello sir, this work flow is still and always a good way of learning...pls keep posting workflow jobs it is not boring it is always interesting....Pls guys support workflow jobs
Mr. Sorin I have being following you for the past 2yrs with no comments or likes But am forced to comment because you didn't invite us, when eating your Gregg's cookies😀😁😊. I am Amos from Ghana and I have always love how you repairs even though am trying very hard to repair with schematic diagram. Nice work flow today.
always enjoy your videos, thank you. Had to laugh at your complaints of a "heat wave" especially living here in tropical high humidity Queensland Australia!
Thank you Sorin for this video. Now I know how to remove iCloud on these iDevices. Thank you so so much. This has always been a problem we couldn't fix.
Because of your videos, I partially fixed my galaxy note 4 which was dead for 2 years and repair shops couldnt fix it. There was a short in a capacitor. used camera on other phone to zoom in and removed it. Phone boots and functions normally, but display got a problem. It was not workng, just brownish with no picture but touch works, cleaned contacts and started again. picture worked only on low brightness and high brightness maakes it brown. Touch didnt worked and only stylus worked. Cleaned it again, display again gone but touch working. So confused at this points. If you can help then thanks otherwise LOVE YOU!!!!! You the MVP thanks aloooot
About the acer tab next time you can put a lot of kapton tape on the connector and make a tower from it and then the camera's connection will sit under pressure (love your vid)
Even some time is gone but I like to add a small simple fix for you for those "broken" connectors like at the camera connector. You can simply add a thin paper on top of the cam-cable to bring some more force to the connector. Did it more then one time now, especially for laptop-keyboards. Many are broken because stupid guys broke it by "disassembly" mwybe it will help you as well ☺️
I sometimes repaired the Acer with a camera problem due to a broken connector by sticking a draft strip or something springy on the connector or place where some pressure was needed and mounting it closed, so that the draft strip was pressed together and then pressing the connector came.
You do an expert job , just i wished that you did a test of connectivity of all those pins one by one with the end points near using multi-meter then change the hole port cause it seems that more pins are cracked, and your telescope doesn't show it clearly . i wished to work with you as a student for free to learn and get experience
Nice video ,perfect lenght for covering the weekend ,I splitted It on Saturday/Sunday , you talked about the heat and humidity , I live in the swamp and Next wednesday begins the cinema festival that ends on the 7th September , I will post on comments the movies for Next year
Hello, i see you still did not get a new solder iron, myself i am using a Solomon soldering iron SL-20 for more than 25 years now, my first adjustable temperature iron, i got only some minor problem as broken cable and power switch, the heating element still be original, the case has a small crack but falled down about 3 times ..., they still sell it for 75€ including VAT, it is easy to by spare iron handle and tips, anyway i am not sure about the actual quality of this product, around here it has been much used in electronic schools. I just discovered a version combination with a desoldering iron SL-916D more expensive of course.
I play Overwatch. There is hero called Tracer which is from UK. They added nice voiceline which she is saying: "Bit dodgy do you think?" I'm hearing this in my mind as soon I saw the hot glue.😆
Suggestion my brother, small magnetic mat, then use mat as template and lay out the screws on mat where they came out from.... just keep hard drives away from it...lol
Hello Sorín, I have a doubt in the repair of the Samsung Tablet, at first shows a consumption of 0.4 A, should always give you a higher consumption over 1.3 A, and for this you know that there must be a connection problem in the data signal?. Thank you for all your videos.Best regards.
I have a dell Latitude e6500. Primary battery failed charging. The laptop turns on only when the battery and the charger are plugged in . if you remove the battery and use the charger alone the laptop turns on for few seconds then turns off. The bios doesn't detect the charger. The charge control ic maxim 8731ae has some corrosion around it..... What can be some possible issues?
I watch Louis Rossmann but he only fixes macbooks. Your channel is great as it shows repair of all kinds of devices which is much harder because you don''t have all kinds of spare parts, schematics and previous repair knowledge on same type of devices.
Help...i have a board with a powerful short on the 19 power rail. It looks like all the board is in short. No matter where i use the power supply 3.3 or 5 or 19 v the result is the same.....short, powerful one. Nothing is getting hot. It could be the processor? Or the board inside. Multumesc Sorin...un fan 😁
You have a good job, very very good job ! I love fix all of componants, tablet, tv, phone, pc...but i'm not a pro. I have one tablet, i can't fix, this is a Samsung Galaxy Tab 3 8", no power, nothing, just the battery is good and the port of charge is good, i think it's not the screen, i think it's a motherboard problem but i don't now where is the problem :D Sorry for my english, i'm french and i'm very bad in english.
O fi costând prima doar 25 de lire, dar eu cred că ai fi cheltuit mai puțin timp cu lipiturile dacă foloseai un flux de calitate. În plus, cine cumpără acea tabletă, o cumpără fiindcă nu are bani pentru una mai scumpă, deci merită lipituri de calitate. Zic. Fludorul este de 1 mm sau de 0.7? Mi se pare cam mare.
if the customer is willing to pay good money, I would change the camera socket. i had the same problem with iPad home key socket which was broken just like this one and I had to change the socket and it worked just fine.
Can someone advice me about shopping a Stereo microscope ? what is different between x3.5-x45 and x7-x90 ? for cellphone repairing which one i have to use? regards
I got an old stereo zoom microscope 1x - 3x. The eyepieces are 10x i think. It gives me about 8cm working distance which is enough. It cost me about €110
Not boring Sorin, everything is interesting and I am learning from it.
Loved this movie of yours you are a magician. Long videos are the best NOT boring
Great to watch, not boring at all!
I like these workflows! 👍👍👍
Sorin. Your repairs are never boring, could watch you work all day. Would probably want to get involved though. Thanks again.
They may be boring to you, but to us they are very informative mate, Remember "everyday is a school day" Thank you..
Despite the long time of the video I’m enjoyed every minute
Thank you Sorin for a nice video
Thank you Sorin.
Sorins boring jobs are the jobs we want too see lol. Ty Sorin , any job you do is great 👍 and we’re lucky too have a professional like you helping us out.
Hi Sarin. Am Joe from the U.S.A., and in the State Of Maine. As a degreed and experienced electronics technician, I have made many units of various items work just by soldering cold joints and pins! You are an excellent teacher, and you just need a good inventory of parts, and Digikey and Mouser are excellent distributors! God Bless you, your work, and family! 😊
I bought the ts100 because it had more power. I’m able to solder even car starter wire with it. But the ts80 is more than good enough for smd repairs.
I like your vids. Keep going. I learned much by watching you fix things here. I am retired because of health issue and this is a new hobby for me now thanks to your vids.
It's funny to think that some of the best ASMR videos are of some Eastern European guy in the back of a market somewhere in the UK, fixing electronics. Really informative stuff, and he has some great dialogue.
;-)
Sorin thank you for everything you are doing.
Lots of work. They are sooooo lucky to have you as tech
Excellent video like usually. Sorin you are the Best Electronic teacher ever. I learned too many things with you
watching your videos is like watching a mystery movie. At the end of the story, you will solved the case. Glad to have found your videos. Though I am an Electronic Engineer, I have long abandoned electronics. Your videos make me realize , not to waste the electronics knowledge
My master, you work wonderfully. Thank you from Turkey.
hello sir, this work flow is still and always a good way of learning...pls keep posting workflow jobs it is not boring it is always interesting....Pls guys support workflow jobs
sorin your vids are never boring great work , and plus ima learnin +++++😎👀🤴☝👍👍👍👍👍👍💞
Workflows are never boring, I miss them! Thank You for sharing.
Mr. Sorin I have being following you for the past 2yrs with no comments or likes
But am forced to comment because you didn't invite us, when eating your Gregg's cookies😀😁😊. I am Amos from Ghana and I have always love how you repairs even though am trying very hard to repair with schematic diagram. Nice work flow today.
Really love your videos and I’m always learning, one day I’ll be as good as you I hope.
have not watch it yet, definitely they will be more to inspire us , keep them coming, Sir Sorin.
Hello im Edwin Sorin Great video thank's im learning' something at 50yrs old I Purchased all the eqmt to learn comp repair.
always enjoy your videos, thank you. Had to laugh at your complaints of a "heat wave" especially living here in tropical high humidity Queensland Australia!
More workflow! Love it.
the camera connection tab you can put a plastic paper sandwiched in between ... i tried it and worked most of the time
Thank you Sorin for this video. Now I know how to remove iCloud on these iDevices. Thank you so so much. This has always been a problem we couldn't fix.
Hello im also a technician in Philippines, i love all of your video...
You are pro. Its not easy to be able to make an expensive job on a cheap budget and a short amount of time. That's pro for me.
I'll never get bored of watching you. I've learnt a lot from you.
2:27:51 It was good 2 hours and the half :) (watched during my repairs) Thank you
Nice job Sorin! Go brother!
Because of your videos, I partially fixed my galaxy note 4 which was dead for 2 years and repair shops couldnt fix it. There was a short in a capacitor. used camera on other phone to zoom in and removed it. Phone boots and functions normally, but display got a problem. It was not workng, just brownish with no picture but touch works, cleaned contacts and started again. picture worked only on low brightness and high brightness maakes it brown. Touch didnt worked and only stylus worked. Cleaned it again, display again gone but touch working. So confused at this points. If you can help then thanks otherwise LOVE YOU!!!!! You the MVP thanks aloooot
Been catching up on the videos..., I have the time. Your doing good work keeping peoples things working cheaply! Always a good thing.
Great video! You have inspired me to add these types of repairs to my I.T. business.
Sorin you are up very late, great video, i learn so much from you 👍🏻
Great video, I love the work flow videos, great to see real repair work
Amazing video, thanks a lot for your efforts and time.
Hey I’m happy you managed to get a copy from Paul Daniels. Like you say super nice guy.
About the acer tab next time you can put a lot of kapton tape on the connector and make a tower from it and then the camera's connection will sit under pressure (love your vid)
Even some time is gone but I like to add a small simple fix for you for those "broken" connectors like at the camera connector. You can simply add a thin paper on top of the cam-cable to bring some more force to the connector. Did it more then one time now, especially for laptop-keyboards. Many are broken because stupid guys broke it by "disassembly" mwybe it will help you as well ☺️
I love you start. Its legendär !
great work
Love the workflows
11:17 That's fantastic - that was pretty much me when something isn't working like it is supposed to be.
I sometimes repaired the Acer with a camera problem due to a broken connector by sticking a draft strip or something springy on the connector or place where some pressure was needed and mounting it closed, so that the draft strip was pressed together and then pressing the connector came.
Sorin nice video.
I get a angry wife when I watched it. She wants me to go to the supermarket but I have no time for it. I was watching a movie 🎥
I love it !!
It was very very useful tutorial video, please upload more like this video. Keep it up. Thnx
Thanks Sorin, Great as usual. Have a great weekend . : - }
You do an expert job , just i wished that you did a test of connectivity of all those pins one by one with the end points near using multi-meter then change the hole port cause it seems that more pins are cracked, and your telescope doesn't show it clearly . i wished to work with you as a student for free to learn and get experience
Nice video ,perfect lenght for covering the weekend ,I splitted It on Saturday/Sunday , you talked about the heat and humidity , I live in the swamp and Next wednesday begins the cinema festival that ends on the 7th September , I will post on comments the movies for Next year
Very Great Job You Have Keep On Working..>Cheers
Will be great to see good video about repairing a TVs 📺. Long time no see only ... 7 videos on your channel about them. So saaad.
Hello, i see you still did not get a new solder iron, myself i am using a Solomon soldering iron SL-20 for more than 25 years now, my first adjustable temperature iron, i got only some minor problem as broken cable and power switch, the heating element still be original, the case has a small crack but falled down about 3 times ..., they still sell it for 75€ including VAT, it is easy to by spare iron handle and tips, anyway i am not sure about the actual quality of this product, around here it has been much used in electronic schools. I just discovered a version combination with a desoldering iron SL-916D more expensive of course.
Sorin bro quit smoking... WE LOVE UUU
I play Overwatch. There is hero called Tracer which is from UK. They added nice voiceline which she is saying: "Bit dodgy do you think?" I'm hearing this in my mind as soon I saw the hot glue.😆
thank you
Thank You for the great video ! :)
Sorin could repair a Area51 UFO...!!
Good Job MR.! :)
sorin something else that works good for heat shielding is aluminum tape i use it all the time hope this can help
Bro you need fibre in that shop
I have been sniffing soldering irons to see if they are hot since 1970 and I still have'nt learnt that they can burn your nose!😁
I saw that too..checkin the temperature by nose...but he's right..you feel the smell of a hot iron!
CLOCK EARLY BUT A BEAUTIFUL VIDEO. THANKS FROM TURKEY
We need all day workflow video.
macs tablet ps4.thenks for this video sorin.lern for you.please more like this workflow
Suggestion my brother, small magnetic mat, then use mat as template and lay out the screws on mat where they came out from.... just keep hard drives away from it...lol
Hello Sorín, I have a doubt in the repair of the Samsung Tablet, at first shows a consumption of 0.4 A, should always give you a higher consumption over 1.3 A, and for this you know that there must be a connection problem in the data signal?. Thank you for all your videos.Best regards.
Sorin, I have just started watching you , where are you from? Just curious. Thanks so much.
I have a dell Latitude e6500. Primary battery failed charging. The laptop turns on only when the battery and the charger are plugged in . if you remove the battery and use the charger alone the laptop turns on for few seconds then turns off. The bios doesn't detect the charger. The charge control ic
maxim 8731ae has some corrosion around it..... What can be some possible issues?
So is there not any risk of over charging/fire/damage from shorting data line? like it won't stop charging even when charged?
Love your videos sorin but I would use a mat incase you are scratching the screens on your bench best wishes
I watch Louis Rossmann but he only fixes macbooks. Your channel is great as it shows repair of all kinds of devices which is much harder because you don''t have all kinds of spare parts, schematics and previous repair knowledge on same type of devices.
Hi there, Please talk about power rail and power supply, what's different between them, how we can diagnose them and fix them. Thnx
I live in south africa ,Limpopo here in summer it is normal to have 29 to 36 degrees heat.
Help...i have a board with a powerful short on the 19 power rail. It looks like all the board is in short. No matter where i use the power supply 3.3 or 5 or 19 v the result is the same.....short, powerful one. Nothing is getting hot. It could be the processor? Or the board inside. Multumesc Sorin...un fan 😁
Welcome bro
Awesome 😎 watch
If the camera problem is the connector, why didn’t you just order one and replace it?
Shorting datalines may mean you cannot use the usb cable to transfer data, right ?
I think that this is true.. a tablet without USB transfers.... Is not a good repair..
@@laboratorioassembler may be, but if customer needs no data transfer, it is better to be able to charge at least.
@@thomasw6169 Yep... and looking at the cheap tablet... maybe can be used to read emails... and watch RUclips videos.
maestre , esti bun
You have a good job, very very good job !
I love fix all of componants, tablet, tv, phone, pc...but i'm not a pro.
I have one tablet, i can't fix, this is a Samsung Galaxy Tab 3 8", no power, nothing, just the battery is good and the port of charge is good, i think it's not the screen, i think it's a motherboard problem but i don't now where is the problem :D
Sorry for my english, i'm french and i'm very bad in english.
Sorin, toti acolo sinteti romani? Tibor from LA, ex Clujean.
nice one
you're king
goooood
O fi costând prima doar 25 de lire, dar eu cred că ai fi cheltuit mai puțin timp cu lipiturile dacă foloseai un flux de calitate. În plus, cine cumpără acea tabletă, o cumpără fiindcă nu are bani pentru una mai scumpă, deci merită lipituri de calitate. Zic. Fludorul este de 1 mm sau de 0.7? Mi se pare cam mare.
I have an expensive Cambridge Azur amp I want to get repaired. How can I contact you, please?
if the customer is willing to pay good money, I would change the camera socket. i had the same problem with iPad home key socket which was broken just like this one and I had to change the socket and it worked just fine.
You update the main camera? I see good quality 2560x1430@30fps :) On 4K tv is OK.
This is old now :p
thank sir
Where did you get your multimeter leads from?
Hot glue is the way to go, hot glue lalalala !
Mr. Hotglue is at it again....
Longscrew damage ?
You forgot to put back the MicroSD card for prev tablet.
Yeah i cringed at that part. He even moved it! Could have priceless family photos on there! 😥
And the gifted card on Canon camera?
Can someone advice me about shopping a Stereo microscope ? what is different between x3.5-x45 and x7-x90 ? for cellphone repairing which one i have to use? regards
I got an old stereo zoom microscope 1x - 3x. The eyepieces are 10x i think. It gives me about 8cm working distance which is enough. It cost me about €110
👍👍👍
You connect the screen while it was on?
Why don`t you just read the bios chip and remove the efi lock and reprogram the bios? by replacing the bios chip you lose the serial number
just do a test live stream and we will see the resault, maybe it will be enough... who knows...
Can we have bloody longer videos please Sir?