That's a decent build. I went a different direction. I have a '78 C10 with a 632 big block from Blueprint. I bought the Builder's Series with the built 4L80E trans. The reason was partly because I like the sound of a big block, and partly because everyone does the LS swap, and I wanted something apart from the crowd. It makes 829.5 hp and 810 ft-lbs of torque on motor. I also have a Currie 9" w/True Trac locker, 4.11 gear, and 35 spline axles. It has QA1 all around w/double adjustable shocks. The brakes are Wilwood all the way.
Robbie Teddy is sounding amazing and I can’t wait to go on the road trip with him and see all the people going Gaga when he’s passing them by!!!! I love this truck!!!
There's more talent and knowledge in that 2 acres of shop bays than the rest of the state of GA, between QCS, Alex Walker, Tim Wallace and all the other guys that rent around that place
Love the channel. I've been watching for about a year. I love what you do with your trucks, and I've learned alot. I am working on a 71' C20 gonna lower it, put some much better suspension on it. Im keeping it 3/4 ton. Been doing lots of research amd sourcing parts and kits to put it together how I want it. Since there isn't a lot offered for the heavier running gear.
Man I wish Alex was closer. Have a friend swapped his 80 dually 6.0 4l80 all brand new stuff. Nobody can get it right in 3 1/2 years just sits in the garage runs and drives kinda but cuts out pops falls on its face won't start. Think it's been to 5-6 shops that supposedly tune LS stuff no luck fixing it
??Question, does that TPS reset procedure work like that on a Holley sniper? I have that issue sometimes with TPS going to 1-2 then tap the throttle and goes to 0. Very intermittent issue
@Oleblueburban, the sniper units automatically reset to absolute zero when you shut the vehicle off. If you’re having problems with calibrating, I would try getting your IAC counts to under 10% at hot idle and shutting it off. Should be good to go after that.
Trans has never been built while in my possession. We added a trans cooler and have changed the gasket but it’s still stock. Alex seems to think it does have a shift kit in it, but I bought engine and trans bolted together and never even broke apart until we added the Circle D converter recently.
@UNITEDBYTRUCKS I can dig what u are saying but it would be killer, don't get me wrong I love Teddy I've seen him come a long way, and every time I give u some advice u say thanks but no thanks and a year or so later you do it, so I'll just seat back and wait. 😂
![700HP Supercharged LSA Chevy Nova SLEEPER! [4K]](http://i.ytimg.com/vi/SsvgPlBT4xE/mqdefault.jpg)
![700HP Supercharged LSA Chevy Nova SLEEPER! [4K]](/img/tr.png)
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
That's a decent build. I went a different direction. I have a '78 C10 with a 632 big block from Blueprint. I bought the Builder's Series with the built 4L80E trans. The reason was partly because I like the sound of a big block, and partly because everyone does the LS swap, and I wanted something apart from the crowd. It makes 829.5 hp and 810 ft-lbs of torque on motor. I also have a Currie 9" w/True Trac locker, 4.11 gear, and 35 spline axles. It has QA1 all around w/double adjustable shocks. The brakes are Wilwood all the way.
Sounds like an awesome truck!
Well dam man that’s badass 🇺🇸🦅
Thanks for the shoutout Robbie. We are defiantly gonna use some of the new UBT cams in some builds soon.
Man, that would be awesome! Just let me know.
Another awesome video with Walker tune!
Robbie Teddy is sounding amazing and I can’t wait to go on the road trip with him and see all the people going Gaga when he’s passing them by!!!! I love this truck!!!
Haha he sure does! Thanks for watching Henry!
Alex out here taking us to HP academy!, love it
It was a great learning experience!
@UNITEDBYTRUCKS i used HP tuners on my truck and you got to have some knowledge to get it right. Teddy sounds so awesome as well.
Teddy has just the *right* amount of chop!
I think so too!
Teddy does sound healthy. Should be a blast to drive.
It sure does and really is!
The Holley Retro Brights are legit!!!!
No doubt about it
sounds friggin amazing
There's more talent and knowledge in that 2 acres of shop bays than the rest of the state of GA,
between QCS, Alex Walker, Tim Wallace and all the other guys that rent around that place
No doubt about it!
That cam, converter & tune solidly put extra hair on 'Ol Teddy's chest! Tough, tough sounding setup!
100%
I’m loving this cam
I can’t wait to see the road trip video and see about the MPG
This could be a contender for my 5.3 swapped 85 suburban
I think you’ll be pleasantly surprised!
Love this channel! Keep it going Robbie 💪🏾💪🏾💯
Thanks for watching, I will!
Love the channel. I've been watching for about a year. I love what you do with your trucks, and I've learned alot. I am working on a 71' C20 gonna lower it, put some much better suspension on it. Im keeping it 3/4 ton. Been doing lots of research amd sourcing parts and kits to put it together how I want it. Since there isn't a lot offered for the heavier running gear.
Thanks for watching and for the kind words!
Sure is nice to see Theodore 👀 it's been a while looking sweet that tune is killer mane 😮yessa
He’s my favorite
Good info!
Appreciate you watching!
Great job Robby sounds 👌
Appreciate it!
Man I wish Alex was closer. Have a friend swapped his 80 dually 6.0 4l80 all brand new stuff. Nobody can get it right in 3 1/2 years just sits in the garage runs and drives kinda but cuts out pops falls on its face won't start. Think it's been to 5-6 shops that supposedly tune LS stuff no luck fixing it
Oh man! Alex’s greatest skill in my opinion is tracking my down gremlins. It helps that he really understands wiring.
@frankm8533 let me know if I can help! It’s a shame to do all of that work and let it sit.
Sweet !!!!!!
Yes sir!
Just ordered that dse box, how you liking it so far? Seems like a nice unit I’m excited to install it
Sounds great Robbie! You said Borla XS Pro with what size pipe?
Yes sir! 2.5” duals with Hooker Blackheart LS manifolds
I flip all my throttle screws to access them from the top. Much easier!
I like that idea!
💯🔥🤘🏼
I might like the white wheels better
I get it! I like it all sorts of ways
No way ! They didn't match nothing.
🤙🔝
WOOOOO
😂😂😂
How much does he charge to tune a vehicle. He spent a whole day tuning your truck.
Teddy sounds nasty! Love that crop! I've got to know, what exhaust/mufflers are you running?
Thank you! They are Borla ProXS mufflers and Hooker Blackheart LS manifolds. I love the sound too.
❤@@UNITEDBYTRUCKS
@UNITEDBYTRUCKS truck sounds great. I'm running same manifolds love the sound with those Pro XS. Is the drone real bad?
??Question, does that TPS reset procedure work like that on a Holley sniper? I have that issue sometimes with TPS going to 1-2 then tap the throttle and goes to 0. Very intermittent issue
@Oleblueburban, the sniper units automatically reset to absolute zero when you shut the vehicle off. If you’re having problems with calibrating, I would try getting your IAC counts to under 10% at hot idle and shutting it off. Should be good to go after that.
Would I be able to use this came in my 6.0 LQ4?
Absolutely, I will be running this set-up in my LQ4 build for another ‘68 c10
WHAT STALL U USE IN CONVERTER
2800-3000 Circle D Converter - it’s listed on my website unitedbytrucks.com
Who built your trans?
Trans has never been built while in my possession. We added a trans cooler and have changed the gasket but it’s still stock. Alex seems to think it does have a shift kit in it, but I bought engine and trans bolted together and never even broke apart until we added the Circle D converter recently.
What does he charge to tune a truck?
Reach out to him and tell him what you’re looking for. walkertuned@gmail.com
Paint the back bumper the same color as the rims, give it that murder look at this point the back bumper is sticking out like a sore thumb.
Haha those are factory matching patina bumpers. Think I’ll keep them as they are on this old base model ‘68
@UNITEDBYTRUCKS I can dig what u are saying but it would be killer, don't get me wrong I love Teddy I've seen him come a long way, and every time I give u some advice u say thanks but no thanks and a year or so later you do it, so I'll just seat back and wait. 😂
💯🔥🤘🏼
Thanks for watching!