The threading shown is not exactly as per the manual but it works with the thread I'm using for the demonstration. Sometimes threading through the extra holes introduces too much pre-tension.
Hola buenos dias, he conseguido una maquina igual a esta de segunda mano, pero me ha venido sin el manual de instrucciones . He intentado en los distribuidores pero no lo consigo. ¿Habría posibilidad de que me pudiese ayudar? Gracias.
So helpful thank you I’ve had my machine near two years I used it a lot when new but don’t use it often being new to industrial sewing and depending and understanding more on domestic machines I learnt a lot from this video Really really helpful - thank you
Hi there Thank you so much for this video. I ordered a Texi walker a few days ago and it seems to be nearly identical with this Zoje ZJ... I´m very happy having discovered your video because there is very less information about the Texi walker to be found in the web. Best regards from Germany Paul
I have just bought this machine and it is my first industrial., so I am a little nervous. This video is very helpful and detailed. I love how you give us clear close ups of the various parts as you are explaining them. Even better you are NZ, so I have subscribed. Because I will have access to things you refer too in other videos. Thank you.
السلام عليكم ان هذا الفيديو أفادني كثيرا ، لأني مؤخرا اشتريت مثل هذه الماكينة ، ولكن هل يمكنك افادتي أكثر فيما يخص الخيط المخصص لهذه الماكينة ؟؟؟ في الأخير أقول لك بارك الله فيك
It likes any jeans weight thread… or from tex 69 up…. I prefer to use tex 80/tkt 30 thread -- polyester (which can be linty)…..or Nylbond/nylon( though that’s really slippery thread). At a pinch Mara 100 but if using sew-all, you’ll probably need to double as it’s very thin for this machine
hi, thank you for sharing this video. I have just bought this machine and I love it. The only problem i have is the presser foot height. Its not high enough only reaching about 10mm. How do I make it higher? I'm scared of breaking the machine. TIA. Donnella
Look in the manual, it’s related to the black round circular thing tower thingey you see on the top left of the machine to increase the height slightly. Don’t pull it all the way or it will pop off… just gently. Also, use your knee press when you raise the take up lever on the back, which you can also then raise slightly higher by pushing up on it more
Thank you for the explain .... but can you tell me what ist better the Suffle foot or the Full Walking foot Sewing mashine, or what from this both mashines ist better for what... Thank you very much from Athens - Greece
Sorry, just a friendly note.....You’ve actually slightly threaded it wrong at that second 2-hole hook (The first 3-hole one on top is correct in your video, it IS only supposed to go through those 2 holes the way you have it) But that second 2-hole loop at 7:24...as per the manual, it is supposed to come in from the back of the top hole and wrap around to come back in again through the back of the bottom hole before going into that small pre-tensioner top disk. (As per #3 on Figure 11, page 8 of the Manual) Love my Zoje 0303, had it since Oct 2017 🤗
Thanks. I found that with the thread I was using, threading through the pre-tensioner put too much tension on the thread I was using. I should have threaded it correctly for the video's sake though. Cheers.
I HAVE done a little plain line quilting with mine, just 1-2 layers batting or 1 batting/1 Insulbrite and 2 fabric, for like oven mitts etc, but it is a medium/heavy fabric/vinyl shuffle/walking foot industrial machine not a plainsewer industrial machine and straight lockstitch only, no zig zag....and not made for freemotion as such by dropping the feeddogs. I actually freemotion with my cheaper Brother or Bernina machine, this Zoje is for my bagmaking/vinyl :)
@@cazkiwinz4300 nice to read you again… You see, I am really interested in this machine! Btw, I also own a Bernina for quilting (but it really was not cheaper🤔) and I love it. But, as everybody knows, one need another one for bag making…
Have you tried under downloads on the Zoje site? There’s a video on YT if you search Zoje Control Box that shows you where they are, or you can take screenshots from this video :)
Hi. An auto foot lifter is put on machines so that you don't have to manually lift the foot with the knee lever. This is single needle only but there are twin needle machines available. Thanks.
The threading shown is not exactly as per the manual but it works with the thread I'm using for the demonstration. Sometimes threading through the extra holes introduces too much pre-tension.
Hola buenos dias, he conseguido una maquina igual a esta de segunda mano, pero me ha venido sin el manual de instrucciones . He intentado en los distribuidores pero no lo consigo. ¿Habría posibilidad de que me pudiese ayudar? Gracias.
So helpful thank you
I’ve had my machine near two years I used it a lot when new but don’t use it often being new to industrial sewing and depending and understanding more on domestic machines
I learnt a lot from this video
Really really helpful - thank you
Very good! Thank you so much for your "class".
Thank you so much for this video. I had a zoje delivered today and found this video so informative.
Hi there
Thank you so much for this video. I ordered a Texi walker a few days ago and it seems to be nearly identical with this Zoje ZJ...
I´m very happy having discovered your video because there is very less information about the Texi walker to be found in the web.
Best regards from Germany
Paul
I have just bought this machine and it is my first industrial., so I am a little nervous. This video is very helpful and detailed. I love how you give us clear close ups of the various parts as you are explaining them. Even better you are NZ, so I have subscribed. Because I will have access to things you refer too in other videos. Thank you.
Thanks for this video, very helpful.
thankyou, this has been super helpful!
Top instruction. Thanks a lot.
السلام عليكم
ان هذا الفيديو أفادني كثيرا ، لأني مؤخرا اشتريت مثل هذه الماكينة ، ولكن هل يمكنك افادتي أكثر فيما يخص الخيط المخصص لهذه الماكينة ؟؟؟
في الأخير أقول لك بارك الله فيك
It likes any jeans weight thread… or from tex 69 up…. I prefer to use tex 80/tkt 30 thread -- polyester (which can be linty)…..or Nylbond/nylon( though that’s really slippery thread).
At a pinch Mara 100 but if using sew-all, you’ll probably need to double as it’s very thin for this machine
Reckon it could handle 6 layers of sail cloth dacron medium weight I would say as a guess?
Hi. Can I get a pic of the part about the different letters please I mean P S and M. Thanks a lot
Beautiful sewing machine ❤
Can you do a tutorial on how to use the ZOJE ZJ9513-G/02 please?
hi, thank you for sharing this video. I have just bought this machine and I love it. The only problem i have is the presser foot height. Its not high enough only reaching about 10mm. How do I make it higher? I'm scared of breaking the machine.
TIA. Donnella
Look in the manual, it’s related to the black round circular thing tower thingey you see on the top left of the machine to increase the height slightly. Don’t pull it all the way or it will pop off… just gently. Also, use your knee press when you raise the take up lever on the back, which you can also then raise slightly higher by pushing up on it more
Hi, My single stitch button isn't working..do you know what settings in the control panel I need to have to get it working again?
Merci beaucoup
Hi, thank you. Could you please tell me which needle size you're using with the NM 20 thread? Thank you.
Thank you for the explain .... but can you tell me what ist better the Suffle foot or the Full Walking foot Sewing mashine, or what from this both mashines ist better for what... Thank you very much from Athens - Greece
Hi. The full compound walking foot is a better type of feeding mechanism but it depends on what you're looking at sewing. Thanks.
I need to by these
hello, what yarn count do you use on the machine
How to fix e-5 this machine..???
Sorry, just a friendly note.....You’ve actually slightly threaded it wrong at that second 2-hole hook (The first 3-hole one on top is correct in your video, it IS only supposed to go through those 2 holes the way you have it)
But that second 2-hole loop at 7:24...as per the manual, it is supposed to come in from the back of the top hole and wrap around to come back in again through the back of the bottom hole before going into that small pre-tensioner top disk. (As per #3 on Figure 11, page 8 of the Manual)
Love my Zoje 0303, had it since Oct 2017 🤗
Thanks. I found that with the thread I was using, threading through the pre-tensioner put too much tension on the thread I was using. I should have threaded it correctly for the video's sake though. Cheers.
🤗
Can your walking foot sewing machine be used for free motion quilting?
I HAVE done a little plain line quilting with mine, just 1-2 layers batting or 1 batting/1 Insulbrite and 2 fabric, for like oven mitts etc, but it is a medium/heavy fabric/vinyl shuffle/walking foot industrial machine not a plainsewer industrial machine and straight lockstitch only, no zig zag....and not made for freemotion as such by dropping the feeddogs. I actually freemotion with my cheaper Brother or Bernina machine, this Zoje is for my bagmaking/vinyl :)
@@cazkiwinz4300 nice to read you again… You see, I am really interested in this machine! Btw, I also own a Bernina for quilting (but it really was not cheaper🤔) and I love it. But, as everybody knows, one need another one for bag making…
You show a manual for the control box. where is this available. I couldnt find one and I diodnt receive one with my machine.
Have you tried under downloads on the Zoje site? There’s a video on YT if you search Zoje Control Box that shows you where they are, or you can take screenshots from this video :)
Hello, I would like to buy this machine, it will be my first industrial machine. Can we use conventional size sewing thread as on household machines?
thank for your video .I have a question about winding a bobbing, during winding a bobbin is the needle moving up and down?
Yes, the idea is to wind a bobbin while you're sewing so there's always a bobbin available to use. Thanks.
Thank you
what is the role of the automated footlift which can be added to this machine? also is it possible to do a double needle on this machine?
Hi. An auto foot lifter is put on machines so that you don't have to manually lift the foot with the knee lever. This is single needle only but there are twin needle machines available. Thanks.
@@InStitches Thanks so much. I am looking at one of these or a compound foot global wf3955 for leather work. Do you have any review insight on either?
Do you deal in 2nd hand machines? Assuming you are in nz?
Yes, I deal in 2nd hand machines and yes, in NZ. Thanks.
@@InStitches have you got a website?
@@scottmardon274 Yes, it's in the video description. Thanks.
Por favor...claro en la explicación...no se entiende el manejo....la compre nueva todo en chino...!
Which country of origin is this machine made.
As far as I know, it's made in China.
my name is PETER living in LOS ANGELES. USA. I want to know (1) where can I buy this machine and its price.-----Model# ZJ 0303L-3-D3. Thank so much.
Sir. please program pdf. Error code pdf send 🙏
Minha máquina ela da f10 oque e
👍👍👍
Il me le faut en français