Nice review! The Teak tuning waves complete ($20 free shipping )i bought came with trucks identical to the LC board. The first board i got from teak was a 32 plain wood ($14.99), had those cheaper trucks with spacers... def feel cheaper quality! for a quality budget board the LC or the nicer Teak completes are great options!
I got the one with better trucks but the axle on them slide and the wheels are always super loose since there is no thread. Are lc boards trucks any more durable?
@@SuzukiKQ700owner the trucks on my LC are the same old style v1 trucks teak used to use until a couple months ago they got an updated v2 trucks that are an improvement overall in all categories. I have not experienced any axel slip issue on 3 sets of v2s yet.
I brought a pair of trucks from teak like a couple years back when I was getting back into fingerboarding and I’ve still got them and there still, aside from the paint, in pretty perfect condition
This Tech deck trucks? Lol, the bollie and tech deck trucks (more or less the same 2 axis design) just hold up 2 or 3 days till I lost the first axis pin…😅 The newer 32mm tech deck trucks seems to be way better so far (haven’t killed any and used them nearly 2 very hard starting weeks) but in the end and in special the 29mm design they are all 2 axis pin design and so they will break pretty fast on harder sessions, only 1 or 2 table-ground drops and they are gone under me…🙈
I had a pair just like the featured and pretty obsolete Teak Tuning/old china trucks (which are seemingly 32mm trucks sold as 34mm or something here) laying around and when I messed around with some other spare parts I took advantage of the long wheel pin by putting additional bearings into a set of cheap wheels to produce what amounts to super budget dual bearing wheels. Turns out this combination works out better than any normal single bearing wheel would on the truck and probably better than the wheels would work on any other truck as well. Still happy to have less rag tag setups to pick from.
GRIPSION!!!! Keep up the work dude and youve inspired me to start making fingerboards and i made my first one today and its definetly a start! I love you so much man!
Another way more interesting difference in the trucks, the LC trucks are single axis, the teak trucks are exactly the same shitty two axis truck like on Tech Decks where they will surly get loose over the time… Sure this can happen to single axis too but there you have the clear advantage that you can’t loose the axis cause it’s still hold on both sides with the wheels… On two axis trucks you just loose one side when it comes loose… So on the truck side you get a way way way better setup with the LC boards… Here in Germany we have a similar choice, you can buy a bollie, a spitboard or a ASI-Shop complete, all goes around for 20€ (more or less the same in US-$)… The bollie and spitboard are with more or less the same parts like teak and the ASI shop completes comes already with single axis trucks in gen 2 or 3 (depends on which size you buy, on 32mm you get 2.0 trucks and on the 34mm you get 3.0 trucks)… If tried nearly all, I bought the bollie complete, a asi 32mm complete, a asi 34mm complete and a 32mm custom with 3.0 trucks, only the spitboard I don’t tried till now and not sure if ever would cause just the same like the bollie with very poor woodwork on the decks, so I would say just not worth it… But the differences are just huge, the shop trucks are pretty well, the 2.0 is mostly the typical china BRT like single axis trucks and the 3.0 already gets some more know how into it and are a pretty high level for only 15€… It came with how it looks new own baseplates, very similar to the 2.0 BRT with an own pivotcup solution and a hardened single axis pin on the hangar… Again, for the just 15€ you get way more the you would expect and with a beta bushing tuning they are on a pretty high level, not exactly like my BRTs but pretty close, too close for the price difference if you ask me…
I got my Teak complete off Amazon. Free Prime shipping and 5% back with my Amazon card 👍🏻 Also the trucks I got were nothing like yours. Looked like the LC ones. No spacers.
I have the graffiti mc board I just ordered a normal complete teak tuning board with a complete teak tuning with apex wheels and rubber bushings the wheels arr pink and look so cool
LCBoards wins this one. Better at every aspect even on the deck cause it has graphics. Truckset - LCBoards, Griptape - LCBoards, Deck - LCBoards, Price - LCBoards, Feel and Stability - LCBoards. An absolute no contest.
I’m looking to buy my first one, you did you get one of the cheaper teaks or one of the better truck ones? Trying to figure out where to get my first one from
my teak tuning trucks broke after like a week of riding it and the wheels broke after another like week aswell getting an lcboards complete soon hopefully its better
Hi Gripsion, I just started fingerboarding a week ago or something and I know how to Ollie… well kinda, and tbh I feel like I am not gonna make it anywhere, what should I do 😢.
Looking into getting my first “pro” board but sense it’s my first I’m trying to find a good budget one to start with first. How are everyone’s thoughts on these two or if you know any other budget companies that are good if you all could give me the info on it to check out. 😊
LC Boards are a great first option just because of the quality you're getting for the price. I've heard that many other fingerboard companies offer very similar products as LC, just for double to triple the price.
Let’s go Gripsion🔥💪
LC boards be pimpin Fr
Lc for the win
Lc better ong
Not sure if it’s gonna happen but we need a collaboration between these to awesome ppl
WWWWWWWWW
Nice review! The Teak tuning waves complete ($20 free shipping )i bought came with trucks identical to the LC board. The first board i got from teak was a 32 plain wood ($14.99), had those cheaper trucks with spacers... def feel cheaper quality! for a quality budget board the LC or the nicer Teak completes are great options!
Yeah u have to get the one with the better trucks and it's awesome for the price .
same
I got the one with better trucks but the axle on them slide and the wheels are always super loose since there is no thread. Are lc boards trucks any more durable?
@@SuzukiKQ700owner the trucks on my LC are the same old style v1 trucks teak used to use until a couple months ago they got an updated v2 trucks that are an improvement overall in all categories. I have not experienced any axel slip issue on 3 sets of v2s yet.
@@SuzukiKQ700ownerif I remember I’ll update you when mines here
I brought a pair of trucks from teak like a couple years back when I was getting back into fingerboarding and I’ve still got them and there still, aside from the paint, in pretty perfect condition
This Tech deck trucks? Lol, the bollie and tech deck trucks (more or less the same 2 axis design) just hold up 2 or 3 days till I lost the first axis pin…😅
The newer 32mm tech deck trucks seems to be way better so far (haven’t killed any and used them nearly 2 very hard starting weeks) but in the end and in special the 29mm design they are all 2 axis pin design and so they will break pretty fast on harder sessions, only 1 or 2 table-ground drops and they are gone under me…🙈
I had a pair just like the featured and pretty obsolete Teak Tuning/old china trucks (which are seemingly 32mm trucks sold as 34mm or something here) laying around and when I messed around with some other spare parts I took advantage of the long wheel pin by putting additional bearings into a set of cheap wheels to produce what amounts to super budget dual bearing wheels.
Turns out this combination works out better than any normal single bearing wheel would on the truck and probably better than the wheels would work on any other truck as well.
Still happy to have less rag tag setups to pick from.
GRIPSION!!!! Keep up the work dude and youve inspired me to start making fingerboards and i made my first one today and its definetly a start! I love you so much man!
I already purchased an LC Fingerboard at the time of watching this video and I got exited
Why'd you got exited.?
Bro exited
You mean excited?
I can tell your 9
@@DJ_GU5you're*
My deck is a lc deck and I use flat face trucks with Mabel wheels and it SHREDS!!!
Yea I have the Arizona complete and it’s good but I want to upgrade the bushings and wheels or get new trucks
you gotta do broken knuckle vs teak tuning!
Got a mystery teak with the upgraded trucks for $17 shipped.. you don’t get to choose the colors but the price point is nice.
I just got that same deal haha.
Congratulations on 124K🎉
Keep up the good work 😊
been waiting for this for a while
LC boards ontop!!!
Another way more interesting difference in the trucks, the LC trucks are single axis, the teak trucks are exactly the same shitty two axis truck like on Tech Decks where they will surly get loose over the time…
Sure this can happen to single axis too but there you have the clear advantage that you can’t loose the axis cause it’s still hold on both sides with the wheels…
On two axis trucks you just loose one side when it comes loose…
So on the truck side you get a way way way better setup with the LC boards…
Here in Germany we have a similar choice, you can buy a bollie, a spitboard or a ASI-Shop complete, all goes around for 20€ (more or less the same in US-$)…
The bollie and spitboard are with more or less the same parts like teak and the ASI shop completes comes already with single axis trucks in gen 2 or 3 (depends on which size you buy, on 32mm you get 2.0 trucks and on the 34mm you get 3.0 trucks)…
If tried nearly all, I bought the bollie complete, a asi 32mm complete, a asi 34mm complete and a 32mm custom with 3.0 trucks, only the spitboard I don’t tried till now and not sure if ever would cause just the same like the bollie with very poor woodwork on the decks, so I would say just not worth it…
But the differences are just huge, the shop trucks are pretty well, the 2.0 is mostly the typical china BRT like single axis trucks and the 3.0 already gets some more know how into it and are a pretty high level for only 15€…
It came with how it looks new own baseplates, very similar to the 2.0 BRT with an own pivotcup solution and a hardened single axis pin on the hangar…
Again, for the just 15€ you get way more the you would expect and with a beta bushing tuning they are on a pretty high level, not exactly like my BRTs but pretty close, too close for the price difference if you ask me…
I love spitboards great decks
They’re both on Amazon so if you have Prime then it’s free shipping
I got my Teak complete off Amazon. Free Prime shipping and 5% back with my Amazon card 👍🏻
Also the trucks I got were nothing like yours. Looked like the LC ones. No spacers.
Literally same, the all black 34 mm version
@@benliftin4awhile I don't underatand what you mean. The Teak trucks I got were 32mm and very clearly a redesign from the ones he had here.
I personally prefer teak if you get the right parts
i ordered all the graphics off of lc and ive set up 2 so far i really recomend lc
Funny enough I got into fingerboarding again like two weeks ago and I got the Arizona graphic LC complete and it’s been pretty decent for the money
Send me no flowers goes hard🔥💯
LC on top 🔥
lc are improved now
Im using tech deck
if you put better baseplates on the trucks, Techdeck trucks are actually so good
Noob
@@EC4lifeand you benjamin😂
@@EC4lifedon’t call anyone a noob by the fingerboard they use their still probably learning
@@EC4lifedon’t judge by their deck
I have the graffiti mc board I just ordered a normal complete teak tuning board with a complete teak tuning with apex wheels and rubber bushings the wheels arr pink and look so cool
This must be why teak has the upgraded trucks. I order a teak to try but might have to cop an LC.
lc are just china decks fyi
LC board gang 👇👇👇
Yaaa
Always agree💯✅
Ummm hummmm💪
LC!!!!
What is the hight of the highest olie you've ever done??
Animal: Octopus
Country: Dominica
Color: Red
lesgooo, I love lcboards. such a good company and some great quality boards
ur the one of the best fb youtuber
Please make a diy fb from elements you found on nature (bamboo, etc)
LCBoards wins this one. Better at every aspect even on the deck cause it has graphics. Truckset - LCBoards, Griptape - LCBoards, Deck - LCBoards, Price - LCBoards, Feel and Stability - LCBoards. An absolute no contest.
For the record teak makes really good trucks but when buy the pre setup they suck
We love lc
What is your favorite fingerboard deck shape (the brand)
5:05 nah what’s that sound
Lc for the win. Should have started with them. I got an lc board after and loved it
I’m looking to buy my first one, you did you get one of the cheaper teaks or one of the better truck ones? Trying to figure out where to get my first one from
Hi Gripsion! Im a new finger boarder and I need help getting down Ollies. The tutorials helped a little but I dont know what could help me succeed
Really lift your hand and cch the concave whith your finger googluck 😊
Nice vid
where'd you get your screwdriver
My first one was all teak but my latest bored is a mix with teak and LC
the wheels are meant to be floating you leave them floating on a full sized board but maybe it’s different for fingerboards
Why don't you get black river fingerboards
I defiantly pick LC! I also feel like the LC deck feels better as well!
💯% LC
Love your content brother the best!!!!
To this is sick I just got a clip board but my grip wouldn’t come off
It’s still goated though
Alex you should make a clear fingerboard with the expos thing and then shred it
I want that Arizona board haha definitely would go with that one
lc on top!
I live in the US and teak has 5$ shipping and I’m not sure about LC yet but I’m buying a deck very soon so I’ll find out then
Gripsion should make a Lego fingerboard park.
Or obstacle
LC all the way
I do like Teak Tuning but I do prefer LC Boards more as they are better for grinding for me.
Love this green 💚
Lc on top, just ordered a new Tokyo graphic
Let’s go never disappoints us
here we go
My bearings just broke on my only fingerboard and I don’t have extras😢
my teak tuning trucks broke after like a week of riding it and the wheels broke after another like week aswell getting an lcboards complete soon hopefully its better
Okay that is good that the lc board is better because I already ordered one
Lc is definitely better for beginners and the board with a good pair of trucks and wheels will set you right up!
Bushings are better from teak
Should have YLLO Active in there with these. Another budget board with decent quality. 24.99 as well.
I wish I heard of lc sooner because I js order a ton of stuff from teak
Was the wheels made out of plastic or rubber
Plastic
I got a orange supreme Kermit LC fingerboard with teak tuning bushings
First comment first view first like, gripson , can you do a live stream?
Hey man
Sup
Omg I love your vids and I got the gripson x bullgod board thx for the vid
I live my lcboard I get yellow bushings and pivot cups the match the rx-7 deck it’s so smooth with urethane wheels
Do you have any extra old decks bro would love to have one again 😅
lets go LC
Hey Gripson can you review skull finger boards?
Bro I have that same teak running board I and agree it LNC is better
I got an LC and it was great until I hit a nollie and it snapped, anyways great vid Grip.
Because we don't have that much money😢😭🥺
I’ve had both me personally I like teak tuning
Do a review of the skull fingerboard complete
Hi Gripsion, I just started fingerboarding a week ago or something and I know how to Ollie… well kinda, and tbh I feel like I am not gonna make it anywhere, what should I do 😢.
Don’t give up bro I learned to Ollie in 4 weeks of practice and now know how to kick flip stay strong 💪
Love your vids😃
Were can I go to join the discord
Like for LC Boards
👇
What is the song he uses😢
nice vid man
I got that same LC deck and it’s hella warped :(
Slide me those boards damn🔥🔥🗣️
Any LCboard promo codes?
I was about to get the same lc boards complete that the one in the video but in US $ its 16 but in canadian $ + taxes + shipping it was 40$😢
I got both off Amazon for cheaper
0 shipping cost
I have a teak tunning teal yeti board
i have teak but i font know the option between the teak or lc
LC fingerboard all the way 💪👍
Looking into getting my first “pro” board but sense it’s my first I’m trying to find a good budget one to start with first. How are everyone’s thoughts on these two or if you know any other budget companies that are good if you all could give me the info on it to check out. 😊
LC Boards are a great first option just because of the quality you're getting for the price. I've heard that many other fingerboard companies offer very similar products as LC, just for double to triple the price.
@@cxrson8403popular brands sell the same trucks and bushings for 15$ that come in the 15-20$ Lc completes
You my biggest fan!!!!! 😊 My fingerboard is broken and it is only 29 mm i want new 😮
Today i just bought my first pro finger boards and I chose Lc boards
I just buy from skull finger boards i didnt think lc or teak ship to uk
Awesome vid
nice video i think it wins lc boards
Not gonna lie, I like that loud loose jangle noise 😅
You got a different quality lc board than I did because mines junk