Dusty....I'd pay big money to be an apprentice under your watch! I'm glad I found your channel. You are absolutely a MASTER CRAFTSMAN!!!! Keep up the good work! David King, Hendersonville, NC
I saw your video on facebook and then searching your channel on youtube. I just wondering why this video don’t have million view. Love your video and your work very professional. Keep up your great work bro. Respect and subscribe!
Hi can you point me to the large equipment you use. Model numbers and why you chose that system. You rail feeding system fir cutting are the best I have seen.
I built a door this way and it warped about 1/2” in the winter and laid flat in the summer. I’m refunding them and trying again with stave core construction.
I've heard from an engineer that wood with big checks in it actually tests stronger than wood without. Do you find that the gaps expand much over time?
Hey! Could you make seven hexagons joining the comon parts, this is, not making seven hexagons and then paste them. For a bookcase without backpart. Thank you Krak!!!
Hi everyone,can somebody explain to me why the corner of the bow ties must be sharp instead of rounded,the radius of the router bit is so clean an crisp,perfect,why go back with the chisel "square" it when it's easier to round up the ties?
This is the best equipped shop I've ever seen. Just beyond excellent.
Makes me a little jealous.
A master at work, I love watching these, particularly the way you blend tech with common sense savvy - fantastic work!
I'm always amazed by your builds! Love your content Dusty.
Thank so much!
This is what I was looking for!!! Now I can build my door!!!! Thank you so much!!!
I’m 42 years old and I have been woodworking since 12. I have never thought to use my chop saw to cut out mortise and tenon. Thank you.
😁👍👍
Yeah, that is pretty awesome!
No Brasil não tem marceneiro deste nível e nem máquinas destas precisão
This guy is the real deal! Those are some epic tools! Love that stock pile of glue!
Would you say the shop has over 100k worth of tools?
I think it's much more than that. Where do you even buy tools like that? That table saw is amazing!
@@savvybuilds newer mind the saw, I'm envious of the clamps
I knew there had to be a door on this channel! This is fantastic and would last last for generations if properly cared for
Brilliant work. Love using reclaimed wood.
Thank you 🙏
Couldn't tear myself away! Watched and watched!
Dusty....I'd pay big money to be an apprentice under your watch! I'm glad I found your channel. You are absolutely a MASTER CRAFTSMAN!!!! Keep up the good work! David King, Hendersonville, NC
Thanks so much 😁👍
Very impressive results, but perhaps better to say a great machinist!
Phenominal craftmanship and artistry. 🤙
Always mesmerized by your work. Keep it up man.
Thank so much!
A door for kings. Beautiful work.
Love to watch you work, very motivating.
Thank you
Beautiful work Sir!
Thank you!!
I saw your video on facebook and then searching your channel on youtube. I just wondering why this video don’t have million view. Love your video and your work very professional. Keep up your great work bro. Respect and subscribe!
I appreciate it thank you!
Un❤buen trabajo me encanta todo lo que haces desde Míchigan soy cubano
Beautiful work!
I just imagined a door like this and I see it in my recommendations..
Очень хорошая работа,точная, аккуратная.Мастер золотые руки!!!!🎉
Красавец! 🤝💪👍👌🇷🇺 руки из правильного места! Станочный парк просто космос!
Станки огонь. Материал г
@@АлексейКириллов-я8р из г конфетку делает
@@АлексейКириллов-я8р материал нормальный. Натуральная старость. Такой стиль мебели из такого материала и делать.
Man you are the best!
I really enjoy watching you make the 'magic'!
Thank you!!
Работа просто супер. Вы очень талантливый человек.
Это очень хорошая работа, на очень хорошем оборудовании. Это стандартная работа столяра.
Великолепная работа ! Молодец мужик 👍🏼
Your wisdom is second to none may God continue to bless you and your family. Wisdom knowledge come from the creator. Bottom line
Just a beautiful job. Awesome.
Im so jealous of his shop setup thats my dream shop
Makin' it look easy, amigo.
nice to see how u work, also u have great instruments
Круто, профессионально. Удачи!
Very nice work!
The woodworker who lets his quality work speak for him!!! Well done, beautiful door and amazing stuff as always. A huge fun.
Spot on work dusty,
Really glad i subbed
Why don't you use wedges in the rails? You would add more strength to the joints. I hope you understand what i am saying. Nice work though!!
Very good my friend, congratuletion
Well equiped funded shop.
Sen bu işte harikasın. Her videonu beğenerek izliyorum.
Figa ma che BRAVO! Quanta attrezzatura fantastica che hai...
Beautiful work young man
Thank you 🙏
Very awesome 👍as always God bless braddah 💯
You have skilled and u got nice working mechinaries so you can do easily bulit the doors by india
What is that black stain
( filler)?? Completes the reclaimed wood nicely
Rapaz que beleza o seu trabalho. Parabéns. Walda Maria Simon. Jacarepaguá Rio de janeiro. Brasil.
Nice craftsmanship 👍 also, really nice shop you got.
What a shop! Great setup and badass work man.
Thank you!!
This guy is awesome👍👍👍👍
Great job.
Hi can you point me to the large equipment you use. Model numbers and why you chose that system. You rail feeding system fir cutting are the best I have seen.
Excellent! 😎👍🏻
That’s awesome!!
Great work man!! What is the Black paste for?
wood and grain filler
素敵な笑顔ありがとうございます‼️
👍👍👍👍 супер. Вот это работа мастера, так держать 💪
Todo buen trabajo va acompañado de un buen Rock'n Roll !!!!
I remember when I was machining doors, I would have faced and edged timber before putting it through a panel planer.
Amazing door
Great build, really awesome. Design always seems to work out! Or did you draw it out with the butterflies?
I built a door this way and it warped about 1/2” in the winter and laid flat in the summer. I’m refunding them and trying again with stave core construction.
Fantastico !
Sei un gigante !
The putty you put on at the end that fills the gaps and gives it a flat smooth surface?
You’re a beast!
Your awesome craftsman
Thank you!
Nobody does it better
Muy bueno una belleza de trabajo maestro
Технологии, оборудование, инструмент и вот Вам изделие!
I've heard from an engineer that wood with big checks in it actually tests stronger than wood without. Do you find that the gaps expand much over time?
love the bowties. that's cool.
Me too!
Remek műhely , remek szakember !
Lets build out of reclaimed wood! ( in a dream wood working shop ) that is special!
Exelente trabalho linda porta.
يسلم ايدك والله يافنان
excelente ,son un artista flaco
Great video. One question, why did you not have used glue for the inner parts, any reason not to "seal" them?
Those solid panels need to be able to expand and contract across the grain. Gluing them could lead to cracked joints.
@@WickedWoodI understand. Thank you!
Со вкусом и шикарно. А как же сама коробка дверная?
Good morning America!!! I want to ask you and find out. What grit of sandpaper do you use to sand the putty you put on to hide the dents?
Hermosa, muchas gracias.
Right now it’s a dead heat tie between Dusty Lumber Co. guy and Key West Waterman guy in the “Who do I wish I was” competition.
Superb 💯👍
Hey! Could you make seven hexagons joining the comon parts, this is, not making seven hexagons and then paste them. For a bookcase without backpart. Thank you Krak!!!
good afternoon, please tell me what you applied from the bucket - is it black putty?
My idol🎉🎉
He's using a Maksiwa table saw, a 100% Brazilian brand 🇧🇷
Istimewa tu perkakas ny komplit banget kaya di toko aja
What is the black wood filler you used may I ask sir.
ты где такие материалы качественные находишь? мне бы такие я дом построил....
So much Makita ❤❤❤❤
Whoever gave this a thumbs-down oughta explain why…
Treehugger!
Where do you get the bow ties iv been making mine doh ,great stuff
Can you tell me the name of the chop saw? I cant really find it. Thanks 🙏
ok. so how long did the job take?
there is over 30.000 of tools , amazing ?
Gostaria de ter metade das ferramentas e máquinas que vc tem.
Даааа ,фрезерный класный 👍
What is the tool at 1:54 of video.
Похоже это должна была быть ДВЕРЬ!
What is that machine with the square cutting thing o.o 1:59
What is the black or gray liquid you put on the wood.
Hi everyone,can somebody explain to me why the corner of the bow ties must be sharp instead of rounded,the radius of the router bit is so clean an crisp,perfect,why go back with the chisel "square" it when it's easier to round up the ties?
What Type or Brand of circular saw Blade did you use on the Makita cutting saw?
👍👍😍