Thank you very much. I had the same problem. I gave up and was about to send the whole system for repair. I followed your instructions and my Z-906 is now working like it should. Simple operation. I cannot thank you enough.
i had right speaker that once every few months went silent until it fixed itself, but this video helped me to force it back to working thank you very much
That’s happening to me right now one speaker out of 4 isn’t working it was cutting on and off I have them mounted in my truck when I hit a little bump I could hear it kick back on then it would cut out. Did you ever find a solution or it just eventually came back to life and went out again?
@@BobbyJones-tv6im just came back to life some days then went out some days, but the video solution helped and there is no problems since for me btw having them in your truck sounds badass
I have the same issue. There is comming some sound out of the back speakers but it sounds more “empty” as when I use the 4.1 version. Does Anybody have this problem too and know how to solve it?
Mine randomly makes a pop noise and stop playing music, then couple minutes later it pops again and starts playing. I have it on the first input using aux but sometimes it randomly changes inputs automatically without me changin anything and I cant change it back because the console is frozen, I cant press anything, only way is to unplug and plug back in... Anyone with the same problem?
bought a new one lmao, its something with capacitors and resistors, not worth fixing, youd pay nearly same price for new unless you know what you doing@@christianweichselbaum3022
@@Eikenv1 What part have you bought new?The controller?As i am having the same exact problem you are describing, sometimes its good for 3 days without probs then on other days it goes crazy
@@kathriellcamilleri5666 I bought a new controller but that wasn't the problem. My guess was it was something inside like a blown capacitor. Anyways, i ended up buying a whole new set of speakers. More worth the repairing.
My Logitech system don't power on. No light on console as well. When I plug to power but seems power is going properly because is consulting approx 4-5 watt. Can you help ? No any single on the console
my Logitech z906 remote control is not work around one year I try everything, the remote sensor led is work but the receiver not receive but the console everything work manually. Please sir tell me have any solution.....!
My Z906 works fine with exception to an annoying buzzing/humming noise. It gets more noticeable when my Z906 control hub volume light is at the 12 'O Clock position and louder. I've tried swapping out wall surge connectors and using a different wall socket for the speakers alone. The odd thing is, when I unplug my Wifi Modem/Router at the router, the hum gets louder. But when I unplug the Wifi Modem/Router at the wall, nothing changes. Any ideas, suggestions, or fixes?
Have the same thing, maybr its from the wires, mine had no copper left on them, they were looking like aluminium, and the wire was very rigid and hard to bend, I changed mine like 3 times on the entire System. Did you manage to solve the problem? Maybe its skmething easyer than rewireing, because I dont want to do thag thing again
Sir, just now i installed my z906 speakers but the front left speaker is giving very less sound. When i connect it to the other ports, the same speaker is working fine. Please help
Hi can you help me pls I connected my both rear speakers with 16gauge wire and the rest with 18 gauge wire is that ok? Now my speaker became very soft and my front left speaker is not working even though I test the speaker and there’s no problem with every speaker
Mine is only working on input 3 and that input only recognizes the front speakers and sub woofer all other input channels don’t work so I can’t get sound out of my back speakers. I did a sound test to make sure the back speakers are connected and they do make sound when I run sound test by holding input
I purchased the Z906 kit a good few years ago now. Recently all satellite speakers give off a quiet yet noticeable (and annoying) high pitched sound all the time when switched on, regardless of volume, source etc. There is no way to have them switched on without hearing the high pitched whine. I've switched power sockets but no difference. Makes the sound on all inputs. Any idea?
Hi. Got two full sets of them. Both of them got the same problem. No powering on. After 5 years of use! The first issue was the problem with communicating between remote control and controller. After one week they not powering on! Got the same problem with both sets after a similar time of using them. Spend already on them more than £700. The stereo system is brilliant, just don`t want to spend another 300. Is anyone of you had the same problem? How did you solve it? Thanks to all responders
Hello I have a question my sound system has been going good for a few months but suddenly its coming up with the decode light I did what you showed in the video and it goes through all speakers one by one like a test I guess then finally the subwoofer but nothing resets or anything and the light stays on it's only working with the two front speakers with minimal bass not sure what to do and suggestions
do you know the type of micro switch used for the power button? i have to either replace it or do you know a solution to get it working properly? i have to push it several times and play with it to power on.
Hello, I have connected z906 via Optical cable with Ifalcon TV 1. the decode light is glowing, but the Center speaker is not playing at all in that mode. 2. In standby mode it's getting heat a lot.
THANKS! I've been having an issue with only my L/R speakers working, but the Center/SW and Surround speakers were silent - I did this, and low and behold... [Orchestral Crescendo Plays] SOUND! :D
My problem is the sub woofer stopped working. I had made a provisional setup and now I I turned off the speakers. Unplugged front left, from right, central and back left speaker cables (not from the sub woofer, but from the speakers). I plugged the cables again. All of them work, except the sub woofer that does not sound. I tried unplugging and plugging the cables from my PC sound card and from the sub woofer. I tried resetting the speakers as you did in this video. The sub woofer is still not working. I did not stretched the cables, nor knock the sub woofer. Any ideas?
Hey, help needed. Brand new Z906 setup today. My 2nd system after the first one was destroyed. Setup complete but I don't get the volume I am used too. Feels like less than half, any suggestions???
HOW TO FIX IF SUBWOOFER IS OK BUT CONTROL UNIT NOT WORKING : Attempt 1) Turned on unit, got zero lights. Tried the Logitech Factory Reset (Turn off control unit, then hold the input button for 8 seconds) and saw 2 input lights turn on, but no sound. Tried this procedure several times, and got 3 inputs lights, then tried again, now with 4 input lights on, but again no sound or other lights. Attempt 2) Disconnected power to subwoofer for 30 seconds, and tried Factory Reset again, with same results as Attempt 1, but now with 3 input lights on. Attempt 3) Disconnected cable from Control Unit to subwoofer, waited 30 seconds, tried Factory Reset yet again, with same results as Attempt 1. Attempt 4) Disconnected power to Subwoofer and Control Unit cable. Waited 60 seconds and tried Factory Reset again, and got same results as Attempt 2 - No Joy. Attempt 5) Found this video, and although was not that helpful, tried Attempt 4 yet again several more times and on the last try, this time it works, and my Z906 is back to normal ! Lesson Learned : You may have to power the subwoofer down and disconnect the control cable and then try the Factory Reset Proceedure more than a few times to get your Z906 back into its working state !
Any idea where to repair or purchase new remote for z906. old one got damaged due to battery leak and logitech support is no existent for out of warranty products
my problem is stop the sound suddenly (flashing the points of sound control) and i have to increase the volume just a bit to start again the sound, after 10 minutes allover again the same ..
Z906 speaker suddenly turned off automatically after turn off i did try to on again but not response. But after 5-7 minutes i did try again and its working. Now i want to know what is the issue?
I have a problem with mine the rear left and rear right aren't working but the rest are and am using a LG smart TV and I also reseted it any suggestions?
How to connect digital input & My console is not working properly and I can did the reset mode many times but my console problem is not solved, and also changes the input but console system not shown effect system flash light. what is the problem
I have a logitech z623 and the problem is when I want to increase the volume the subwoofer speaker makes a cranking noise the sub speaker doesn't produce a clear bass sound it comes noisy please can you assist me thanks I am from Papua new Guinea..
Hello, I am using a z906 for the past 3 years and since yesterday, my volume control wheel is not functioning. The volume can be lowered in remote but wont go up. the volume wheeel is completely disfunctional. Please help.
Centre speaker and front right speaker output has some cracking sound when sound and bass is above 60% , any solution ? I checked speakers alternatively , it's ok.
sorry that answer was not correct :D its a 5.1 and will give you good surround experience, even better if you connect it trought optic wire since the sound will be more clear and crisp
pan singh can you check the power from the front left speaker output line (by the galvanometer)? If no power, than it’s IC problem and contact with service centre.
My Z906 have the same Problem, but i cant not Buy a new Controller. I had 3 Controllers in 4 Years, every Controller have the same Problem like yours in the Video. Thats so mad ._.!
Hi there, I'm having a problem. My speaker hangs. I cant use any input nor volume is working. There's no sound too. All i can hear it this DHISS DHISS cracking sound time to time.
nice audio sistem, but i saw few problems with this audio sistem, and the problem 1 , is the 4 speakers not work same time, 2 ; the receiver is very weak , 3; the turn on,off button is weak too, so is good for music, but not for everything else, i prefer buy an home theater whos have great sound and work the 4 speakers, but nice audio sistem
Avista Das authorised service provider Global Brand. Dhanmondi tader service center. IDB bhabon gele Global Brand er office theke service center er thikana & advice paben. They are cooperative, but right now everything is closed for CORONA.
Hi, just want see if u are able help please. When console on 5.1 channel, there is no sound output. But when i turn off all the decodes, then only i get sound. Please help
How long you facing this problem? Did you play the sound with current setting before? Check you input selection. It must be match with Subwoofer input and Console panel input selection. For example, If you use input 4 in Subwoofer, you must have to select the "input 4" on Console panel by remote or pressing input selection button.
Amar z906 tv te use kori. Tv te normal chanel gula te 5ta speakers +sub woofer kaj kore. Kinu youtube ba pendrive theke sudu matro 3ta 2ta speakers and sub woofer kaj kor. Baki 2ta kore n keno??? Ki vhabe solve korbo??? Amar fiver optical cable diya use kori. Amar Samsung smart tv. 3.1 jack system nai.
You get five lengths of standard 18-guage speaker wire and you can use them for any of the 5 speakers that suits your room setup. • Two 7.6-meter lengths ideally for your rear satellite speakers • Three 4.6-meter lengths ideally for your front and center satellite speakers. You might want to cut the wires to be shorter but if you do make sure you remember to mark which is your red and black connection cables otherwise you will destroy the speakers. I was lazy and just cable tied up the extra long cables to avoid a mess.
I have a problem on Z906. I played the sound system for around 30-40 minutes but when I tried to change my volume through remote the whole power of the sound system got shut down. Can you please tell me what to do?
My Z906 Logitech speaker was boxed for few months due to shifting. Now when I reconnect the system no light shown by pressing power button. Please guide.
Mine too stopped working after 7 years. I have a problem like three lights in input were on continuously. I tried clicking power button for 8 sec it again goes off and show three lights again nothing works. If you know any fix on my issue please help.
Hey, thanks for the help. I'm wondering how to get all 5 speakers to work without using the 3D effect. Any suggestions?... Sometimes when watching certain TV shows it will use Digital Decoding and I'll be able to get all speakers working. When I'm Listening to music however I'm only able to use 4.1, or 2.1. If I want to have a 5.1 experience with music the only option is the 3D effect. This is the only downfall to this system for me. Any ideas?
I have the same unit the holding reset down work though. Many others have the same problem. Stops working and shows 3 bars. Hold down the reset and it will show 4 bars like you demonstrated. Unfortunately when I hold down the power the lights go off then the 3 lights come back on and that's it. One person claimed he took his apart and it was two resistors that had failed he replaced them and it works. Since mine is under warranty I won't. Looking around the web and seeing the problems people are having I may see if I can just get my money back. For the 20 or so min mine ran it sounded good but dunno.
Burnningsoul, that will be good if you get your money back. Most probably they will fix the sound problem, but they will not give you money back. However, let us know the status. Thanks in advance.
@@mybanglareview I bought mine reconditioned through amazon. When I talked to their people they suggested going through the manufacture as a warranty request so I did. I talked to their tech person and after trying a couple things she told me it was a hardware issue and would pass it on to their warranty dept. Logitech warranty dept sent me an email asking for a copy of the bill of sale from amazon which I sent. I then didnt hear from them for two weeks. I called they told me that no decision had been made yet. A few days went by and amazon person called me asking what was happening. I updated him on what was going on. He told me they would send a replacement. When I asked if it was going to be another refurbished or new he said new ( this turned out not to be true it was another refurbished missing a remote control this time). While that was being shipped a replacement unit showed up from logitech warranty dept. It was brand new. A day later Amazons replacement showed and as I said it was refurbished. I notified amazon as to what happened . They person gave me the shipping info to send the original broken one back to them and I could keep the replacement they sent. So now I have two units.
My problem is that my control unit forgets the stored settings. Every day I have to readjust the settings. Logitech support wasn't able to help me. Does somebody have a solution for this stupid problem? I would appreciate it very much!
On 2.1 mode: I got Left and right front. Subwoofer works too. Going 4.1 or 5.1 mode. Left front works. but right front is then the center speaker.Rear leftt and subwoofer works but then Right rear is all muffeld. (Using Soundblaster ae-5 or 7.1 onboard realtek) I don't like this set. Edit: On the Logitect self speaker test all speakers are correct. (white noise test)
you plugged them using the 3.5mm jacks or through optical? if you used the 3.5mm jacks than you probably connected them wrong, with the AE-5 its annoying because they don't have color coded 3.5mm ports. if you are using optical however you can change each channel output for each speaker through the sound blaster command software. as for onboard - these should be color coded, but in many cases the Realtek drivers are overridden by the creative drivers if you also have a sound blaster card so in reality you should probably disable them through BIOS to prevent audio driver related conflicts. if you are using the x3 3.5mm jacks then i would advise you to use a Toslink wire to connect the z906 to your AE-5, your signal would be much cleaner and you could pump out louder volumes with almost no distortion from the z906 when using Toslink
@@HoLDoN4Sec brother plz help , all speakers work f9 but how to get sound from all speakers , there are effects option but in 4.1 centre speaker is off , 2.1 works but they are only 2 , in 5.1 we select 3d option but that makes the rear speaker sound muffled or echoed like , it says in the manual if u go to page 11 it says for no effect play audio from your computer sound card that Is available through 6 channel input so for all speakers to play correctly at the same time do I need to buy soundcard and also through that six channel sound card audio playing that I will get , will it also support dts Dolby 5.1 sound ?
@@muslimtomcruise depends on what kind of a computer you have, you might actually already have 5.1 input on your motherboard from the back of your computer (Orange, Black and Green 3.5mm inputs). of course the speakers would sound better when used with a dedicated soundcard since all onboard audio chips are quite garbage. you don't need to touch a single setting on the Z906's unit itself, just set it to input 1. if you connected the z906's subwoofer correctly with all 3 of the 3.5mm cables to the correct inputs on the back of your PC / correct ports on the soundcard you are using - the computer should do all of the rest on its own. only input 1 and the two optical inputs are outputting REAL 5.1 surround - so disregard what the Z906's control unit says, the "Decoder" and "Stereo" modes are artificial 2.1 / 4.1 / 5.1 (labeled as 3D). you should only regard these modes when you are using any of the other input channels of the Z906's subwoofer (Input 2 - 5, and except for the two optical inputs - both of which will operate exactly the same like Input 1). as for "dts digital surround" and "dolby digital surround". disregard these two logos. dts digital surround is a marketing name for the FAKE 5.1 surround you get if you only plug in a 2 channel input. and "dolby digital" is just a marketing name for watching content that's digitally distributed (streaming / DVDs/ Blurays etc.) so in reality that means absolutely nothing to you. i wouldn't recommend you to use the z906 with any other input source that is NOT either Optical / S/PDIF or the triple 3.5mm connection to your PC. this fake "5.1" that this unit is creating from a 2.0 signal input sounds really awful compared to using an Optical cable (if you are using it with a console or tv) or using it with a PC's direct 3x3.5mm 5.1 channels input.
Anyone please let me know how is this product. Saw so many good reviews and read it’s having so issues with input lights and stopped working after 6 months. Can anyone give me some advice about this. Am planning to buy a 5.1 so any recommendation. Thanks
I'm also looking at getting one but have also heard terrible reviews about them breaking frequently. I don't usually do this but I think I might get the Amazon 4 year warranty with it since it seems like issues will likely be a reality with this system
Sheron George There is no doubt, this is one of the best within this range of money. However, after using 3/4 years you may got some problems, but that can be fixed!
You can not play the subwoofer at 100% for a longer period of time otherwise it will overheat and if you play it for way to long on 100% it can get destroyed
J'ai réglé définitivement le problème après avoir essayé toutes sortes de solution. Tenir le plus loin possible des appareils électroniques tel que , ps4, xbox, blu-ray télé etc etc et le problème n'existe plus..!
Thank you very much. I had the same problem. I gave up and was about to send the whole system for repair. I followed your instructions and my Z-906 is now working like it should. Simple operation. I cannot thank you enough.
i had right speaker that once every few months went silent until it fixed itself, but this video helped me to force it back to working
thank you very much
That’s happening to me right now one speaker out of 4 isn’t working it was cutting on and off I have them mounted in my truck when I hit a little bump I could hear it kick back on then it would cut out. Did you ever find a solution or it just eventually came back to life and went out again?
@@BobbyJones-tv6im just came back to life some days then went out some days, but the video solution helped and there is no problems since for me
btw having them in your truck sounds badass
@@BobbyJones-tv6im You can also just plug the red coloured wire into another neighbouring port. Keep the black wire in its normal port
I have. Question I have the same kit but when I put on 3D no sound is coming from the back speakers
I have the same issue. There is comming some sound out of the back speakers but it sounds more “empty” as when I use the 4.1 version. Does Anybody have this problem too and know how to solve it?
am planning to buy this unit.. thank you so much good sir..
Limmuel June Baylin Welcome.
I have the same problem, the input four lights are on, and then there is no response. How can I solve it?
Mine randomly makes a pop noise and stop playing music, then couple minutes later it pops again and starts playing. I have it on the first input using aux but sometimes it randomly changes inputs automatically without me changin anything and I cant change it back because the console is frozen, I cant press anything, only way is to unplug and plug back in... Anyone with the same problem?
I have the same issue. What have you done to fix it?
bought a new one lmao, its something with capacitors and resistors, not worth fixing, youd pay nearly same price for new unless you know what you doing@@christianweichselbaum3022
@@Eikenv1 What part have you bought new?The controller?As i am having the same exact problem you are describing, sometimes its good for 3 days without probs then on other days it goes crazy
@@kathriellcamilleri5666 I bought a new controller but that wasn't the problem. My guess was it was something inside like a blown capacitor. Anyways, i ended up buying a whole new set of speakers. More worth the repairing.
I am having the same problem...anyone any solution
My Logitech system don't power on. No light on console as well. When I plug to power but seems power is going properly because is consulting approx 4-5 watt. Can you help ?
No any single on the console
my Logitech z906 remote control is not work around one year I try everything, the remote sensor led is work but the receiver not receive but the console everything work manually. Please sir tell me have any solution.....!
Change the batteries
Take a long Stick and use it to make loud or less loud
My Z906 works fine with exception to an annoying buzzing/humming noise. It gets more noticeable when my Z906 control hub volume light is at the 12 'O Clock position and louder. I've tried swapping out wall surge connectors and using a different wall socket for the speakers alone. The odd thing is, when I unplug my Wifi Modem/Router at the router, the hum gets louder. But when I unplug the Wifi Modem/Router at the wall, nothing changes. Any ideas, suggestions, or fixes?
Have the same thing, maybr its from the wires, mine had no copper left on them, they were looking like aluminium, and the wire was very rigid and hard to bend, I changed mine like 3 times on the entire System. Did you manage to solve the problem? Maybe its skmething easyer than rewireing, because I dont want to do thag thing again
My Z9gitech speaker was boxed for few months due to shifting. Now when I reconnect the system no light shown by pressing power button. Please guide.
Sir, just now i installed my z906 speakers but the front left speaker is giving very less sound. When i connect it to the other ports, the same speaker is working fine. Please help
Thanks from Mexico city. Great solution.
Thank you 😊
Hi can you help me pls I connected my both rear speakers with 16gauge wire and the rest with 18 gauge wire is that ok? Now my speaker became very soft and my front left speaker is not working even though I test the speaker and there’s no problem with every speaker
Support projecter Screen Sir ?
My Logitech z906 worked in condition but since yesterday when I own the switch it automatically shutdown what is the fault please give me an idea.
The system works well for a while Then clicking sound and the sound goes off whilst system is still on.
Mine is only working on input 3 and that input only recognizes the front speakers and sub woofer all other input channels don’t work so I can’t get sound out of my back speakers. I did a sound test to make sure the back speakers are connected and they do make sound when I run sound test by holding input
I purchased the Z906 kit a good few years ago now. Recently all satellite speakers give off a quiet yet noticeable (and annoying) high pitched sound all the time when switched on, regardless of volume, source etc. There is no way to have them switched on without hearing the high pitched whine. I've switched power sockets but no difference. Makes the sound on all inputs. Any idea?
Martin Bowen Sorry I’m not sure. In other cases I saw, it happens for improper ampere of power supply.
One of my satellite speaker also seem to be like that, any fix yet?
@@NicoAG_ all of mine do it. It must be an issue with the sub or amp
@@martin05916 or probably just the particular satellite, i rotated it, the problem is with that satellite only.
Hi. Got two full sets of them. Both of them got the same problem. No powering on. After 5 years of use! The first issue was the problem with communicating between remote control and controller. After one week they not powering on! Got the same problem with both sets after a similar time of using them. Spend already on them more than £700. The stereo system is brilliant, just don`t want to spend another 300. Is anyone of you had the same problem? How did you solve it? Thanks to all responders
I have same issue, mine is not starting up at all, no signal...
Hello I have a question my sound system has been going good for a few months but suddenly its coming up with the decode light I did what you showed in the video and it goes through all speakers one by one like a test I guess then finally the subwoofer but nothing resets or anything and the light stays on it's only working with the two front speakers with minimal bass not sure what to do and suggestions
do you know the type of micro switch used for the power button? i have to either replace it or do you know a solution to get it working properly? i have to push it several times and play with it to power on.
Hello, I have connected z906 via Optical cable with Ifalcon TV
1. the decode light is glowing, but the Center speaker is not playing at all in that mode.
2. In standby mode it's getting heat a lot.
Remote control is not working and to switch on we have to keep pressing the power button then it will switch on.... please share the solution
THANKS! I've been having an issue with only my L/R speakers working, but the Center/SW and Surround speakers were silent - I did this, and low and behold... [Orchestral Crescendo Plays] SOUND! :D
Is there any option in 5.1 channel front left and right. Volume option
Hello, all okay but no bass from SW. Cables, PC Sound settings okay. Any help? Thanks
sale it and buy other one
Are you connected using optical cable input
You rock Bangle, i thought i had broken the whole thing. I have the 1000 watt version and it worked perfectly! Thanks
There are no two versions, only one.
@@AbsoluteFidelity model, version whatever it is...it worked.
@@certifiedanxiety3126 so stop talking like there is a 1000w and 500w version.
@@AbsoluteFidelity lol its not that serious.
My problem is the sub woofer stopped working.
I had made a provisional setup and now I
I turned off the speakers.
Unplugged front left, from right, central and back left speaker cables (not from the sub woofer, but from the speakers).
I plugged the cables again.
All of them work, except the sub woofer that does not sound.
I tried unplugging and plugging the cables from my PC sound card and from the sub woofer.
I tried resetting the speakers as you did in this video.
The sub woofer is still not working.
I did not stretched the cables, nor knock the sub woofer.
Any ideas?
Hey, help needed. Brand new Z906 setup today. My 2nd system after the first one was destroyed. Setup complete but I don't get the volume I am used too. Feels like less than half, any suggestions???
HOW TO FIX IF SUBWOOFER IS OK BUT CONTROL UNIT NOT WORKING :
Attempt 1) Turned on unit, got zero lights. Tried the Logitech Factory Reset (Turn off control unit, then hold the input button for 8 seconds) and saw 2 input lights turn on, but no sound.
Tried this procedure several times, and got 3 inputs lights, then tried again, now with 4 input lights on, but again no sound or other lights.
Attempt 2) Disconnected power to subwoofer for 30 seconds, and tried Factory Reset again, with same results as Attempt 1, but now with 3 input lights on.
Attempt 3) Disconnected cable from Control Unit to subwoofer, waited 30 seconds, tried Factory Reset yet again, with same results as Attempt 1.
Attempt 4) Disconnected power to Subwoofer and Control Unit cable. Waited 60 seconds
and tried Factory Reset again, and got same results as Attempt 2 - No Joy.
Attempt 5) Found this video, and although was not that helpful, tried Attempt 4 yet again several more times and on the last try, this time it works, and my Z906 is back to normal !
Lesson Learned : You may have to power the subwoofer down and disconnect the control cable and then try the Factory Reset Proceedure more than a few times to get your Z906 back into its working state !
Any idea where to repair or purchase new remote for z906. old one got damaged due to battery leak and logitech support is no existent for out of warranty products
Jerry George Available in Amazon at USD 24.99
I have a following proplem I but the Aux in the sub and in my phone all leds that I turn on are on but there's no sound when I turn Musik on
Ultras Austria Did you try to solve the problem by resetting control unit?
Is there any way to increase volume left and right only in 5.1 mode
my problem is stop the sound suddenly (flashing the points of sound control) and i have to increase the volume just a bit to start again the sound, after 10 minutes allover again the same ..
Bro my z906 down 3 lights on my system is not work help me
Hi can we adjust levels of Front Left and Front right speakers?
Thats not posible
The auto shut down drives me crazy, can one disable it
Z906 speaker suddenly turned off automatically after turn off i did try to on again but not response. But after 5-7 minutes i did try again and its working. Now i want to know what is the issue?
Me too have this problem when plug out and plug in problem solved
I have a problem with mine the rear left and rear right aren't working but the rest are and am using a LG smart TV and I also reseted it any suggestions?
How to connect digital input
& My console is not working properly and I can did the reset mode many times but my console problem is not solved, and also changes the input but console system not shown effect system flash light.
what is the problem
I have a logitech z623 and the problem is when I want to increase the volume the subwoofer speaker makes a cranking noise the sub speaker doesn't produce a clear bass sound it comes noisy please can you assist me thanks I am from Papua new Guinea..
Thank you much man. You're my savior!!!! 💕💕💕
Welcome. Plz subscribe my channel for next video on this. Your subscription will encourage me.
How you run decode ? How you connect z906 to tv or ntb ? You use sound card ? Can you post a photo how you used ? Thanks
I have that kind of sound system also but it has a problem some kind of not turning on, if press power button it will only blink and turn off
Does it support equaliser?
It does not support equaliser.
is the decode light supposed to be on ?
Hello, I am using a z906 for the past 3 years and since yesterday, my volume control wheel is not functioning. The volume can be lowered in remote but wont go up. the volume wheeel is completely disfunctional. Please help.
Well your console is broken so i suggest you buy a new console
Exactly my problem. It won't go up just down and no got worse. Where can we buy new one ?
Centre speaker and front right speaker output has some cracking sound when sound and bass is above 60% , any solution ? I checked speakers alternatively , it's ok.
It’s new problem to me. I didn’t face this type of problem.
I have same no sound problem but I cant solve as you show the way
Thanks for the help! This worked for me.
I have some problem on my speaker can you help me plz ?
Does this system give a good surround sound experience when watching movies?
u will shake the windows if u turn it up
sorry that answer was not correct :D its a 5.1 and will give you good surround experience, even better if you connect it trought optic wire since the sound will be more clear and crisp
My left front speaker stoped working when i plug speaker to other port its works but not on front left port need help
pan singh can you check the power from the front left speaker output line (by the galvanometer)? If no power, than it’s IC problem and contact with service centre.
My Z906 have the same Problem, but i cant not Buy a new Controller. I had 3 Controllers in 4 Years, every Controller have the same Problem like yours in the Video. Thats so mad ._.!
Ayden Hitcher 😢
Please tell me, do you know how I can turn off lights on the console?
Helped me reset system. Thanks. I was having a different problem.
Vaiya how much this price?
Hi there, I'm having a problem. My speaker hangs. I cant use any input nor volume is working. There's no sound too. All i can hear it this DHISS DHISS cracking sound time to time.
nice audio sistem, but i saw few problems with this audio sistem, and the problem 1 , is the 4 speakers not work same time, 2 ; the receiver is very weak , 3; the turn on,off button is weak too, so is good for music, but not for everything else, i prefer buy an home theater whos have great sound and work the 4 speakers, but nice audio sistem
Thanks. I will make new video on few more issues. I hope you will enjoy it.
thanks for the video this worked!
Is it good for listening music i'm lookin to buy them
Ye Its Good
Vai Jodi internal part kharp hoye jay tahole ki tik kora jabe .. Logitech er valo kono castomar care ache ki ?
Avista Das authorised service provider Global Brand. Dhanmondi tader service center. IDB bhabon gele Global Brand er office theke service center er thikana & advice paben. They are cooperative, but right now everything is closed for CORONA.
Digital input means optical input?
No, digital input & optical input is different.
hi i am having some problem like base not working ..can you help me about it plzz
Bro I have some questions is there any way to contact with you
Hi, just want see if u are able help please.
When console on 5.1 channel, there is no sound output. But when i turn off all the decodes, then only i get sound. Please help
How long you facing this problem? Did you play the sound with current setting before?
Check you input selection. It must be match with Subwoofer input and Console panel input selection.
For example, If you use input 4 in Subwoofer, you must have to select the "input 4" on Console panel by remote or pressing input selection button.
Sir my Logitech homethetre controller do not on.
Amar z906 tv te use kori. Tv te normal chanel gula te 5ta speakers +sub woofer kaj kore. Kinu youtube ba pendrive theke sudu matro 3ta 2ta speakers and sub woofer kaj kor. Baki 2ta kore n keno??? Ki vhabe solve korbo???
Amar fiver optical cable diya use kori. Amar Samsung smart tv. 3.1 jack system nai.
logitech Z906 when trying volume up it goes power off.. Can u help me.. From dhaka
How many length of speakers wires?
You get five lengths of standard 18-guage speaker wire and you can use them for any of the 5 speakers that suits your room setup.
• Two 7.6-meter lengths ideally for your rear satellite speakers
• Three 4.6-meter lengths ideally for your front and center satellite speakers.
You might want to cut the wires to be shorter but if you do make sure you remember to mark which is your red and black connection cables otherwise you will destroy the speakers. I was lazy and just cable tied up the extra long cables to avoid a mess.
THX what doing every one getting problems with this home theatre we trust THX or not
Bhai decod lighter kaj ki r kokhon jole?
I have a problem on Z906.
I played the sound system for around 30-40 minutes but when I tried to change my volume through remote the whole power of the sound system got shut down. Can you please tell me what to do?
Joydwip Modak it maybe the problem of resistor on the motherboard, you should send it back for warranty (if you have).
My Z906 Logitech speaker was boxed for few months due to shifting. Now when I reconnect the system no light shown by pressing power button. Please guide.
I called logitech and they sent me a new console free of charge. That may fix your issue if it's not an issue with the speakers themselves.
i have the same problem i found the peeled resistors R79; R80 in Subw ....
Exchange of R79, R80 (5,6Ω 2W ±5%) + reset = OK ;)
How can i use decode mode...???
Same question bro 😃
Remote control is not working and to switch on we have to keep pressing the power button but its not On
Mine too stopped working after 7 years.
I have a problem like three lights in input were on continuously. I tried clicking power button for 8 sec it again goes off and show three lights again nothing works. If you know any fix on my issue please help.
Hi. Check this out: ruclips.net/video/VSfqKv3Arw4/видео.html
click INPUT button for 8 sec
@@Tex-9090 Tried it not worked
What are the dimensions of the console?
How to on decode mood?
Yes how to on decode mode and stereo too
Plz plz tell me sir
Did you fixed the problem?@@anvil_2.0
No bro
Hey, thanks for the help. I'm wondering how to get all 5 speakers to work without using the 3D effect. Any suggestions?... Sometimes when watching certain TV shows it will use Digital Decoding and I'll be able to get all speakers working. When I'm Listening to music however I'm only able to use 4.1, or 2.1. If I want to have a 5.1 experience with music the only option is the 3D effect. This is the only downfall to this system for me. Any ideas?
Didnt try it for months but now I again. all the lamps shine like a latter from up to down. It fucking sucks.
I have the same unit the holding reset down work though. Many others have the same problem. Stops working and shows 3 bars. Hold down the reset and it will show 4 bars like you demonstrated. Unfortunately when I hold down the power the lights go off then the 3 lights come back on and that's it. One person claimed he took his apart and it was two resistors that had failed he replaced them and it works. Since mine is under warranty I won't. Looking around the web and seeing the problems people are having I may see if I can just get my money back. For the 20 or so min mine ran it sounded good but dunno.
Burnningsoul, that will be good if you get your money back. Most probably they will fix the sound problem, but they will not give you money back. However, let us know the status. Thanks in advance.
@@mybanglareview I bought mine reconditioned through amazon. When I talked to their people they suggested going through the manufacture as a warranty request so I did. I talked to their tech person and after trying a couple things she told me it was a hardware issue and would pass it on to their warranty dept. Logitech warranty dept sent me an email asking for a copy of the bill of sale from amazon which I sent. I then didnt hear from them for two weeks. I called they told me that no decision had been made yet. A few days went by and amazon person called me asking what was happening. I updated him on what was going on. He told me they would send a replacement. When I asked if it was going to be another refurbished or new he said new ( this turned out not to be true it was another refurbished missing a remote control this time). While that was being shipped a replacement unit showed up from logitech warranty dept. It was brand new. A day later Amazons replacement showed and as I said it was refurbished. I notified amazon as to what happened . They person gave me the shipping info to send the original broken one back to them and I could keep the replacement they sent. So now I have two units.
I can't reset my device. I have 2 input lights permanently turn on. nothing works. please help
My problem is that my control unit forgets the stored settings. Every day I have to readjust the settings. Logitech support wasn't able to help me. Does somebody have a solution for this stupid problem? I would appreciate it very much!
On 2.1 mode: I got Left and right front. Subwoofer works too.
Going 4.1 or 5.1 mode. Left front works. but right front is then the center speaker.Rear leftt and subwoofer works but then Right rear is all muffeld.
(Using Soundblaster ae-5 or 7.1 onboard realtek)
I don't like this set.
Edit: On the Logitect self speaker test all speakers are correct. (white noise test)
you plugged them using the 3.5mm jacks or through optical?
if you used the 3.5mm jacks than you probably connected them wrong, with the AE-5 its annoying because they don't have color coded 3.5mm ports.
if you are using optical however you can change each channel output for each speaker through the sound blaster command software.
as for onboard - these should be color coded, but in many cases the Realtek drivers are overridden by the creative drivers if you also have a sound blaster card so in reality you should probably disable them through BIOS to prevent audio driver related conflicts.
if you are using the x3 3.5mm jacks then i would advise you to use a Toslink wire to connect the z906 to your AE-5, your signal would be much cleaner and you could pump out louder volumes with almost no distortion from the z906 when using Toslink
@@HoLDoN4Sec Thanks, I already went for a digital cable. Only weird thing is, it clicks fine in my soundblaster but not in the subwoofer. Lol
@@HoLDoN4Sec brother plz help , all speakers work f9 but how to get sound from all speakers , there are effects option but in 4.1 centre speaker is off , 2.1 works but they are only 2 , in 5.1 we select 3d option but that makes the rear speaker sound muffled or echoed like , it says in the manual if u go to page 11 it says for no effect play audio from your computer sound card that Is available through 6 channel input so for all speakers to play correctly at the same time do I need to buy soundcard and also through that six channel sound card audio playing that I will get , will it also support dts Dolby 5.1 sound ?
@@muslimtomcruise depends on what kind of a computer you have, you might actually already have 5.1 input on your motherboard from the back of your computer (Orange, Black and Green 3.5mm inputs).
of course the speakers would sound better when used with a dedicated soundcard since all onboard audio chips are quite garbage.
you don't need to touch a single setting on the Z906's unit itself, just set it to input 1.
if you connected the z906's subwoofer correctly with all 3 of the 3.5mm cables to the correct inputs on the back of your PC / correct ports on the soundcard you are using - the computer should do all of the rest on its own.
only input 1 and the two optical inputs are outputting REAL 5.1 surround - so disregard what the Z906's control unit says, the "Decoder" and "Stereo" modes are artificial 2.1 / 4.1 / 5.1 (labeled as 3D).
you should only regard these modes when you are using any of the other input channels of the Z906's subwoofer (Input 2 - 5, and except for the two optical inputs - both of which will operate exactly the same like Input 1).
as for "dts digital surround" and "dolby digital surround". disregard these two logos. dts digital surround is a marketing name for the FAKE 5.1 surround you get if you only plug in a 2 channel input.
and "dolby digital" is just a marketing name for watching content that's digitally distributed (streaming / DVDs/ Blurays etc.) so in reality that means absolutely nothing to you.
i wouldn't recommend you to use the z906 with any other input source that is NOT either Optical / S/PDIF or the triple 3.5mm connection to your PC.
this fake "5.1" that this unit is creating from a 2.0 signal input sounds really awful compared to using an Optical cable (if you are using it with a console or tv) or using it with a PC's direct 3x3.5mm 5.1 channels input.
Sir tv to optical connect hai abi sound problem hai sound ata hai chala jata hai kya karu koi bana bhi nahi raha chennai
Hi Bro, I'm from Chennai. Same problem will please help suggest me
Hi bro, I tv is also connected with optical fiber but no sound in input 3,4 . Any solution. Reset don't worked
My z906 2 port work but other 3 not working
Anyone please let me know how is this product. Saw so many good reviews and read it’s having so issues with input lights and stopped working after 6 months. Can anyone give me some advice about this. Am planning to buy a 5.1 so any recommendation. Thanks
I'm also looking at getting one but have also heard terrible reviews about them breaking frequently. I don't usually do this but I think I might get the Amazon 4 year warranty with it since it seems like issues will likely be a reality with this system
bought it few days ago. had amazing sound for one day. now its dead and i have the input lights issue just as hundreds of other users. piece of crap
Sheron George There is no doubt, this is one of the best within this range of money. However, after using 3/4 years you may got some problems, but that can be fixed!
Quarkhammer It’s really sad to know. However, did you send it for warranty?
your "fix" didnt work at all, aggravated me more that i smashed it and ordered a new set, my old set was well over 7yrs old
Logitech z906 subwoofer kaj korche na, Please help me.
Permanently have bottom 3 input lights on. When switching unit off it will come back on automatically again showing the 3 input lights. Thanks
Exactly what I’m experiencing.
Congratulations! Inch subwoofer?
8 inch bro
Is it normal subwoofer is heating when playing song or not
You can not play the subwoofer at 100% for a longer period of time otherwise it will overheat and if you play it for way to long on 100% it can get destroyed
Really thanks 🙏 bro
pls help how to on decoder 😢
Subwoofer not working
J'ai réglé définitivement le problème après avoir essayé toutes sortes de solution.
Tenir le plus loin possible des appareils électroniques tel que , ps4, xbox, blu-ray télé etc etc et le problème n'existe plus..!
From which website do real Dolby Digital songs download?
Chandrakant Kakade You can get Dolby Digital sounds from CDs. Some websites says their uploads are Dolby Digital but that doesn’t work.
Doesn't worked for me ..my problem was the sound was stucked on half and now is stucked on 4 😟