To borrow the words of the famous Guy Martin "this has got hospital written all over it" . if it doesn't get you during the repair it will get you after it.
Idea for video creator: Instead, take the output fuel line and place in left nostril. Pinch right nostril shut. Close mouth to prevent escaping gas. Turn on motor for approx 25-30 seconds. Have lighter ready. Open mouth slightly and ignite lighter near mouth. Hopefully this method will prevent the posting of stupid ass posts.
Rechne mal die 400 + Leute , die sich das Vid angesehen haben als Multiplikator für "verschwendete Lebenszeit" drauf..... Wir wollen doch verarscht werden , oder ? Und mal ganz ehrlich , selbst wenns funktioniert hätte ? 10€ gespart und dafür fährt dann immer das Risiko mit das ich mit so einem Mist einen tödlichen Unfall verursache ? No Way !
Drill the holes using a drill press for precision. Use a hardened steel nail or brad. Assemble and bond pieces together with J-B Weld. Then throw away.
clean using steel wool under recently boiled water, put salt until it doesnt dissolve and some oil on top of the water to avoid dissolving oxygen, get a 5v wall charger and put your piece on negative and a bit of solder on positive, don't expose the aluminium to oxygen and always start the deposition right after you cleaned the piece, put the oil only when starting the deposition. Then after that thin layer is deposited you can use leaded or leadfree solder and it'll stick to aluminium.
An engineer would have told you that what you did was not welding but more of a back yard aluminum solder attempt. Welding involves melting rhe base metal and the fill metal so that they form a rather uniform alloy making a continous metal piece. You did not even achieve a good solder joint with your technique.
"Buy a new one" only works if 'new ones' are available. Depends on the part in question. There are ways to weld aluminium reliably. This is not one of them.
To make your weld with heterogeneous filler metal, you must first heat your support that you want to weld, so that it melts the filler metal, if it is compatible!? of which you will make sure beforehand that the latter has a lower melt degree index than what you want to weld. Otherwise congratulation for the creation and assembly of your blowtorch and the manufacture of the aluminum wrist brace, beautiful engineering.
I would never run the risk of finding myself braking or shifting with a broken lever. it is a piece subjected to constant stress and for the little cost the game is not worth the candle
@@GausDIY there's a reason if it breaks. Accidentally it's something that can happen, it's a different matter if it happens because I tried to repair it. the insertion of a pin, also made of iron, a harder material than the alloy, reduced the thickness of the section intended to accommodate it, thus being able to cause a sudden breakage during the stroke, the work for carrying out the welding was ingenious but certain materials are particularly unsuitable in DIY, I sold bar counters, compressors, scales, slicers, fryers, meat mincers etc... and our technicians did great on copper, soft iron and stainless steel, they were capable of making iron rollers for graters, but also for welding of aluminum or anodized alloys, brass, cast iron, antimony and more had to turn to equipped laboratories and it was often convenient to order the new piece from the supplier. good life.
You know what. All you people keep complaining about this video but i don't see any of you having the mental capacity to even fathom this idea or even trying to bring something back to life. Including your manners... he did a great job and made some great all viewer friendly content. Thank you for your video and I'm sorry these people are so entitled to their not existent imagination.
Or if a bike falls over on cement and breaks the handle . There's good ones and bad ones . That was pot metal . Recycled cast dirty aluminum made into bicycle parts .
I was shaking my head throughout the video saying “that’s not going to work just sleave them together or buy a new one “ . The blow torch was fun though .
idée intéressante mais vouée à l'échec 1: une soudure cela se prépare avec des surfaces de contact propres, sèches, brossées afin de pouvoir se contacter avec l'apport de soudage.2:une poignée en aluminium ne sera pas soudée avec un apport de plomb ou d'étain ce n'est pas compatible et surtout la soudure alu se fait sous vide d'argon.3: le report que vous avez fait avec le scotch est bien pour la première partie mais vous avez pour la seconde juste copié et décalé le scotch sur la partie de droite or il fallait retourner le scotch pour qu'il corresponde au profil opposé.4: il suffisait de percer comme fait sur les 2 morceaux et fileter chaque élément en insérant une tige filetée de vis et serrer l'ensemble avec de la résine époxy qu'il suffisait de poncer ensuite pour obtenir un bon résultat.5 Pour bien souder il est utile de bien chauffer les 2 parties à souder si vous voulez que l'apport tienne. Si vous ne chauffez que l'apport aucune soudure de se fera et l'apport fondra et tombera au sol. Sinon un bon point pour le montage du chalumeau.
لايجب ان لا تستهانوا بأي فكرة يجب ان نشكر الرجل لانه قدم لنا فكرة ناجحة بالمجان .هل هذا جزاءه البعض يستهان انا بالنسبة لي اشكره جزيل الشكر واشجعه واوحييه.
When I want to move a marking to another surface I use Engineer’s Blue. That’s a highly pigmented paste and is really good. They sell in different names.
clean using steel wool under recently boiled water, put salt until it doesnt dissolve and some oil on top of the water to avoid dissolving oxygen, get a 5v wall charger and put your piece on negative and a bit of solder on positive, don't expose the aluminium to oxygen and always start the deposition right after you cleaned the piece, put the oil only when starting the deposition. Then after that thin layer is deposited you can use leaded or leadfree solder and it'll stick to aluminium.
Viele fühlen sich Berufen, doch nur wenige sind Auserwählt! Den Spruch kennen sogar viele Ingenieure. Schade, dass keiner was von dir lernen konnte. Du hast deine- und die Zeit vieler anderer hier verplempert. Woher hast du 65000 Abonnenten?
I used to block these channels at the first time. Only good RUclipsrs remained. Once, but never again. Jailes are full with people who's time got stolen. Adding every minute of every viewer means that this punk gets jailed for many years with the right government. An eye for an eye, a minute for a minute.
Te sujiero que metas la pieza en yeso en un molde, y despues fundas aluminio, y lo bacees en el molde de hueso y te queda perfecto, yo asi lo eh hecho, soy de México.
@@GausDIY They might have lost the will to live before you threw your attempted repair into the trash bin. May I suggest you do the same with your camera and prevent us all WASTING our time too.
Jajajaja me hiciste reír de verdad pero no digas eso jajajaj si puede ser verdad eso es barato jajaja pero tuviste la 💡 tienes mucha creatividad Dios te Bendiga pero me dió risa lo q dices al final jejeje me sacaste una sonrisa y estaba triste por unas cosas y no pensé q este video me cambiaría la forma de ver las cosas y en realidad me diste una gran lección por eso me suscribí
I have broken motorcycle foot rest in my store. Thought about fixing it several times. Your video helped me a lot to throw it. Thank you
To borrow the words of the famous Guy Martin "this has got hospital written all over it" . if it doesn't get you during the repair it will get you after it.
I was thinking what a potential explosion. Wonder how long those hot glue joints will last with gas working on them.
Goal of this video achieved. I haven't laughed so well in a long time
Thank! Have a nice day!
😊😊
Idea for video creator:
Instead, take the output fuel line and place in left nostril. Pinch right nostril shut. Close mouth to prevent escaping gas. Turn on motor for approx 25-30 seconds. Have lighter ready. Open mouth slightly and ignite lighter near mouth.
Hopefully this method will prevent the posting of stupid ass posts.
LOL! Indeed!
Hallelujah! Holy Sh!t! Where's the tylenol?
Agreed, 😮 what a waste of time. Sometimes these videos just suckered us into watching.
@@jimmcclurg9885😊😊/😊😊/😊😊/😊😊😊😊😊😊😊/😊😊
😂😂😂
Just an absolute waste of 13 minutes and 49 seconds of your life that you'll never get back.
I thought it was quite funny. I'm pretty sure it was meant to be.
Truly cringe-worthy...
Rechne mal die 400 + Leute , die sich das Vid angesehen haben als Multiplikator für "verschwendete Lebenszeit" drauf.....
Wir wollen doch verarscht werden , oder ?
Und mal ganz ehrlich , selbst wenns funktioniert hätte ? 10€ gespart und dafür fährt dann immer das Risiko mit das ich mit so einem Mist einen tödlichen Unfall verursache ? No Way !
Thx i stop watching the video at 3:32 😂😂
@@Salahdin_216 You're welcome. He just throws it away and tells you to buy a new one at the end anyway.
Truly the last Fix-It video you'll ever have to watch... 😂 13:36
Stimmt 😂😂😂😂😂
Eres un bueno para nada hubieras empezado por el final
It ignorant people that purposely wast others time for no other reason than to be a dick that shouldn't have a yt channel p.s.🖕@@Tandrabuddha
I think you mean the last one you WANT to watch.
アルゴン溶接してもらえよ
Lost me when he used a self tapping screw as a drill bit🤣
Drill the holes using a drill press for precision. Use a hardened steel nail or brad. Assemble and bond pieces together with J-B Weld. Then throw away.
😅😅😅😅
install completed brake lever onto scooter then throw scooter away.
clean using steel wool under recently boiled water, put salt until it doesnt dissolve and some oil on top of the water to avoid dissolving oxygen, get a 5v wall charger and put your piece on negative and a bit of solder on positive, don't expose the aluminium to oxygen and always start the deposition right after you cleaned the piece, put the oil only when starting the deposition. Then after that thin layer is deposited you can use leaded or leadfree solder and it'll stick to aluminium.
@@fss1704 ... and then throw away.
buy a new one instead
The best part of this entire video is the last 10 seconds. What a complete waste of time.
😂😂🤣🤣 You should be working for Netflix. You hooked me in the first episode 🤣🤣👏👏
Yes, my friend, I will give it a try 😁😁😁
That was priceless.
Andy Kaufman humor where you get the laugh, but the joke is on us.
An engineer would have told you that what you did was not welding but more of a back yard aluminum solder attempt. Welding involves melting rhe base metal and the fill metal so that they form a rather uniform alloy making a continous metal piece. You did not even achieve a good solder joint with your technique.
You have to watch til the end
😅😅😂😂
@@ZapattaZDon’t bother
He is just trying working with his hands until he gets the porn music studio off the ground
It's an act of brazing aluminum.
Take into account the cost of bit’s and pieces plus hourly rate a new one is cheaper and safer
Don’t watch to the end…complete waste of time!!!
but depend if can buy the same
"Buy a new one" only works if 'new ones' are available. Depends on the part in question. There are ways to weld aluminium reliably. This is not one of them.
Bello davvero.avete un' amico in più in Italy,Gianni.😊😊😊❤❤❤
Ciao amico dall'Italia, ti auguro una splendida giornata ❤️❤️
Was das für ein Video , wie Sprenge ich mich selbst weg , Kauf dir einfach ein neuen Bremshebel und du lebst länger 😂
I wish i had’ve found this useful video before I went on Amazon and bought a brand new pair for $18.99 delivered the following day🤔
Thank you, but if you buy a new one, it will be very good and safe. Wishing you and your family a happy weekend
To make your weld with heterogeneous filler metal, you must first heat your support that you want to weld, so that it melts the filler metal, if it is compatible!? of which you will make sure beforehand that the latter has a lower melt degree index than what you want to weld. Otherwise congratulation for the creation and assembly of your blowtorch and the manufacture of the aluminum wrist brace, beautiful engineering.
What in the 7 eleven is goin' on here? 😆
That's like telling someone how to build a clock when they ask you what time it is.
Jajaja excelente video..... Y lo seguí hasta el final jajaja. 😅😅😅😅😅😅
jaja, deseo que usted y su familia estén siempre seguros y felices. ¡muchas gracias!
Just started watching and am wondering what's in the middle bottle. Is that urine? Is it beer? 🤣
Yeah, why don’t they say what it is?! Probably is “apple cider vinegar.”
@@Doing_it_right_the_first_time It`s the explosion barrier.
Lol! I wasn't expecting that!
I bet his mum wasn't happy with her dining table when she got home!
I would never run the risk of finding myself braking or shifting with a broken lever. it is a piece subjected to constant stress and for the little cost the game is not worth the candle
If the motorbike falls, it can cause the brake lever to break. Thank you, have a nice day!
@@GausDIYи позвоночника, чего уж там😅 так что всё же лучше заменить на литую😂 тут на велике опасно ездить, что уж там про мотоцикл говорить😅
@@GausDIY there's a reason if it breaks. Accidentally it's something that can happen, it's a different matter if it happens because I tried to repair it. the insertion of a pin, also made of iron, a harder material than the alloy, reduced the thickness of the section intended to accommodate it, thus being able to cause a sudden breakage during the stroke, the work for carrying out the welding was ingenious but certain materials are particularly unsuitable in DIY, I sold bar counters, compressors, scales, slicers, fryers, meat mincers etc... and our technicians did great on copper, soft iron and stainless steel, they were capable of making iron rollers for graters, but also for welding of aluminum or anodized alloys, brass, cast iron, antimony and more had to turn to equipped laboratories and it was often convenient to order the new piece from the supplier. good life.
You know what. All you people keep complaining about this video but i don't see any of you having the mental capacity to even fathom this idea or even trying to bring something back to life. Including your manners... he did a great job and made some great all viewer friendly content. Thank you for your video and I'm sorry these people are so entitled to their not existent imagination.
I concur
Goes to show you that even the worse of ideas can fool, some people.
When you have time on your hands, heck anything is possible
Buena reparación gracias.
Thanks for the compliment! I love tinkering and trying to fix everything I can. Have a great day !!
Thank you for passing my time , but hats off for yr jugad for welding.
Thank you too Friends!
Thank you for sharing these helpful tips.
Great idea❤❤❤
Thank you! Cheers! 🤩
Excellent, going to break one then get a labotomy 😂😂😂
You just wasted your time 😂😂
Yeah, and mine
Just get an ac/dc tig welder, bottle of argon, helmet, gloves, a workshop.
What a load of work for that. I’d rather just replace it
@@eddiee9491 true
That will work until you need to stop quickly and then you will find one piece in your hand and no brakes. Good luck with that.
Or if a bike falls over on cement and breaks the handle .
There's good ones and bad ones . That was pot metal . Recycled cast dirty aluminum made into bicycle parts .
Saludos desde Barinas Venezuela gracias por compartir tus enseñanzas
had naar school gegaan dat had gescheeld!!!
Mil gracias Dios te bendiga🎉❤❤❤
Hola nuevo amigo, un amigo lleno de amabilidad y cortesía, ¡deseo que siempre seas feliz!
wtf this was nice 😂😂😂
I was shaking my head throughout the video saying “that’s not going to work just sleave them together or buy a new one “ . The blow torch was fun though .
Not only you successfully waste over 13 minute and 49 second but also overtime in comment section when we are searching satisfaction
если между два паловиний середину супер и сода клеит недержалбо😍
Brawo 2 dni stracone 😂😂😂
Gracias, por ahorrarme doce minutos, de mi vida.
Great video bro, you put a big smile in my face ... Thanks for sharing
Glad you enjoyed it ! ❤️❤️
Schade um diese Zeit und Arbeit. Das dümmste was ich gesehen habe nach max.2 min.kann man abschalten.😅😅😂😂 weil nur scheiß raus kommt.
Thank You Very much.
Just what I Needed.
Very nice work
Thank You
Glad it helped!
I would sooner use chewing gum than that method 😂😂😂😂😂
L'archétype du mauvais bricoleur. Toutes les étapes sont soigneusement foirées. Ça tient du génie !
Funny april fools video.
Comment section is even funnier, you can tell who did not really watch
that's actually funny :D
idée intéressante mais vouée à l'échec 1: une soudure cela se prépare avec des surfaces de contact propres, sèches, brossées afin de pouvoir se contacter avec l'apport de soudage.2:une poignée en aluminium ne sera pas soudée avec un apport de plomb ou d'étain ce n'est pas compatible et surtout la soudure alu se fait sous vide d'argon.3: le report que vous avez fait avec le scotch est bien pour la première partie mais vous avez pour la seconde juste copié et décalé le scotch sur la partie de droite or il fallait retourner le scotch pour qu'il corresponde au profil opposé.4: il suffisait de percer comme fait sur les 2 morceaux et fileter chaque élément en insérant une tige filetée de vis et serrer l'ensemble avec de la résine époxy qu'il suffisait de poncer ensuite pour obtenir un bon résultat.5 Pour bien souder il est utile de bien chauffer les 2 parties à souder si vous voulez que l'apport tienne. Si vous ne chauffez que l'apport aucune soudure de se fera et l'apport fondra et tombera au sol. Sinon un bon point pour le montage du chalumeau.
Merci de partager vos connaissances et votre expérience. Je vous souhaite, à vous et à votre famille, une bonne journée !
لايجب ان لا تستهانوا بأي فكرة
يجب ان نشكر الرجل لانه قدم لنا فكرة ناجحة بالمجان .هل هذا جزاءه البعض يستهان انا بالنسبة لي اشكره جزيل الشكر واشجعه واوحييه.
أشكركم على تحياتكم، أتمنى لكم ولعائلتكم السلام والسعادة
😂😂😂😂😂😂😂😂 thank you very much 😂
Welcome 😊 😁😁
El mejor video que he visto en mi vida. Como perder trece minutos y cuarenta y ocho segundos de mi tiempo para aprender a los 70 años.
Hola señor, le deseo que siempre tenga momentos felices y buena salud.
I'm just gonna buy one. Thanks anyway. My tweeking sister in law would love this.
Hope you enjoy it!
Ya hace muchos años que dejamos de chupar el dedo. 😂😂😂
Fantastic that’s exactly how I would do it
Lavorare in questo modo è assolutamente da folle indipendentemente dal risultato.
UTube should find a way to prevent time wasting videos from it's platform, unless their title says: THIS IS JUST A TIME WASTER.
I felt, I felt that something would go wrong. So much innovation and a spectacular ending😅😅😅😅😂😂😂😂
When I want to move a marking to another surface I use Engineer’s Blue. That’s a highly pigmented paste and is really good. They sell in different names.
Ficou bacana mandou muito bem
Next Up: Engineers show me how to dislodge my head from a tailpipe after my brake lever failed.
Palpak😂
Hola, soy el señor ingeniero veterano , he aprendido mucho … Gracias por todo
Me vuelvo a mis asuntos de ingeniero veterano
😅
Bueno, gracias amigo divertido y humorístico. Deseándote siempre felicidad y buena suerte en la vida. ❤️
You're obviously not an engineer at all! Just an ignorant low-grade mechanic!
Veterano decimos aquí para referirnos a un ma r i con experimentado.
clean using steel wool under recently boiled water, put salt until it doesnt dissolve and some oil on top of the water to avoid dissolving oxygen, get a 5v wall charger and put your piece on negative and a bit of solder on positive, don't expose the aluminium to oxygen and always start the deposition right after you cleaned the piece, put the oil only when starting the deposition. Then after that thin layer is deposited you can use leaded or leadfree solder and it'll stick to aluminium.
Et ensuite tu fais comme lui et tu jettes tout à la poubelke 😂
è un godimento !!! specialmente l'acqua e la benzina .
Viele fühlen sich Berufen, doch nur wenige sind Auserwählt!
Den Spruch kennen sogar viele Ingenieure.
Schade, dass keiner was von dir lernen konnte.
Du hast deine- und die Zeit vieler anderer hier verplempert.
Woher hast du 65000 Abonnenten?
😂 funny indeed... Good job man... From this 🤔 to this 🤨😒😠 and finally 😂😂😂
Gave me a good laugh haha
Da ich schon länger keinen guten Witz gehört hatte, konnte ich mich reichlich über dieses Video amüsieren 🤣
I’ve been in the motorcycle industry since 1981, NOBODY WELDS LEVERS.
What a ridiculous waste of time
This is fucking hilarious
You taught me one thing. How too waste time 😂😂😂
Супер😂😂😂😂😂😂😂😂
De Argentina amigo..... muy bueno
😂😂😂😂 son los 13.48 minutos de mi tiempo perdidos poniendo atención al tip's para que al final solo me hiciera reir,jajajaja 😂😂😂
OMG RUclips please give us a x8 speed button!
If your life has that litttle value i guess it s an option
Thank you for sharing. I support your channel TT
If you got that right, I'd be blown away. Good effort. 😅
Good job, just some people don't understand the enjoyment of doing this.
Yeah exactly! it is passion
Hi i'm from Italy, watch this random video and i stay focus for all time... and the end is really hilarious 🤠 bye bruh
Goodmorning Bro!
شكرا لستهزائك بنا
Don't get pulled over with this stuff in your car.
तुम्हारे लिए अच्छा बिजनेस है वेरी गुड
धन्यवाद आपका दिन अच्छा है!
The comment section is the best part !
I was gonna call you a idiot but since you threw it in a garbage I think you're smart.
Ok Friend! Have a good day!
Yeeeee Best!🤣🤣🤣👍
Thank Sir! ❤️❤️
I used to block these channels at the first time.
Only good RUclipsrs remained.
Once, but never again.
Jailes are full with people who's time got stolen.
Adding every minute of every viewer means that this punk gets jailed for many years with the right government. An eye for an eye, a minute for a minute.
Your video is great, I really like this idea
Glad you like it! 😁😁
Te sujiero que metas la pieza en yeso en un molde, y despues fundas aluminio, y lo bacees en el molde de hueso y te queda perfecto, yo asi lo eh hecho, soy de México.
Gran idea, lo haré en el vídeo.
Perfect 👌
Thank you! Cheers!
I think that most of de comments are from people that didn’t see the end of the video 😊
I'm very grateful to you for watching and understanding the message I want to convey
@@GausDIY They might have lost the will to live before you threw your attempted repair into the trash bin. May I suggest you do the same with your camera and prevent us all WASTING our time too.
Jajajaja me hiciste reír de verdad pero no digas eso jajajaj si puede ser verdad eso es barato jajaja pero tuviste la 💡 tienes mucha creatividad Dios te Bendiga pero me dió risa lo q dices al final jejeje me sacaste una sonrisa y estaba triste por unas cosas y no pensé q este video me cambiaría la forma de ver las cosas y en realidad me diste una gran lección por eso me suscribí
Muy bueno 👍
Mdr, so modest, that he will build us the future rocket by going to Mars
This is by far the best channel how not to do follow any advice. Trigger alarm 🚨: South Park >> Washington Redskins 🤣🤣
The end got me!!!😂😂😂
❤️❤️👍
Una leva freno saldata???? è da pazzi!!!?