This was very informational and has helped me with some problems I’m having. Where do I find information on which DBV will accept the new $5? Can an up stack magazine work for a down stack or does it not matter? Can an “Entertainment “ DBV work in a “Vending” machine and vise versa?
I wish I had watched this video before installing the replacement. I did not know the faceplates are easily changed. :( But I know! Thank you for making this video. Its very informative.
Thank you for a well explained video. How would I know if my validator has flash port or not? And if it does how can I get it to accept 5’s? Thank you.
We have no messages from you or anybody asking about a bill validator for a claw machine. Send me a picture of the connector that the bill validator plugs into and I can recommend a bill validator for it. Vendingworks@yahoo.com
Hi... I'm having an issue with my CoinCo validator where it just keeps making a whizzing noise and tries to start up but then nothing... I've restarted the machine and reset the all the components.. Any idea??
It sounds like the transport motor gears are stripped. This usually happens when somebody is trying to cheat the machine by pulling the bill out as it's being sucked in. You are going to have to replace the bill validator
I Have a VN 2512 U 3 and for some reason it only allows one bill per transcation and when I tried to put a second bill ,it will take all coins that I want but not a second bill. The unit is new but ot is always the same problem only one bill and when I try the second one nothing Can you help me?
That is not a bill validator issue, that is a setting in the programming of your machine. First I would try buying the most expensive item in the machine using only coins, if that doesn't fix it then you have to change the bill validator setting in your machine
I just retired after 36 years in the Aerospace industry and I am looking to start a new venture. Is there any room for a guy with decent mechanical skill to start a repair business in bill validator and coin changer repairs?
This was extremely helpful. I'm new to the industry. Thank you! Please keep providing this fascinating content!
Yes! So awesome! Have a stack of these to go through and figure out compatibility!
Great info. Please keep posting videos like this.
Very good video, really helped me understand this product. Great job !!!
This was very informational and has helped me with some problems I’m having.
Where do I find information on which DBV will accept the new $5?
Can an up stack magazine work for a down stack or does it not matter?
Can an “Entertainment “ DBV work in a “Vending” machine and vise versa?
I wish I had watched this video before installing the replacement. I did not know the faceplates are easily changed. :( But I know! Thank you for making this video. Its very informative.
Thank you!!! This was great!
Thanks for the video! What is the difference between a VN (vending) and AE (amusment) acceptor?
Very informative , specifications well explained
Can a Mars MS1000 be updated to a more modern version of a coin validator?
Thank you for a well explained video. How would I know if my validator has flash port or not? And if it does how can I get it to accept 5’s? Thank you.
Hi , how to setup mei sc advanced in window 10 ?
great video.Can you tell me which pins are the output 1 pulse or 4 pulses? I want to hook my ae2411 to an arduino.
Thank you.. great job explaining
Tried contacting you on your website last week about a bill validator for my ICE Pinnacle claw machine. No response so far.
We have no messages from you or anybody asking about a bill validator for a claw machine. Send me a picture of the connector that the bill validator plugs into and I can recommend a bill validator for it. Vendingworks@yahoo.com
Very very informative
I have a bunch of bill acceptors need to be repaired Where are you located please and how much you charge for repair thanks
Hi... I'm having an issue with my CoinCo validator where it just keeps making a whizzing noise and tries to start up but then nothing... I've restarted the machine and reset the all the components.. Any idea??
It sounds like the transport motor gears are stripped. This usually happens when somebody is trying to cheat the machine by pulling the bill out as it's being sucked in. You are going to have to replace the bill validator
@@Vendingworks ok... do you sell or repair these? It's a Coinco BP2BX.. and again thanks for the supersonic reply!
@@kalpatel8537 Yes we do sell those.
vendingworks.com/collections/shop-by-brand-3/products/coinco-bill-pro
I Have a VN 2512 U 3 and for some reason it only allows one bill per transcation and when I tried to put a second bill ,it will take all coins that I want but not a second bill.
The unit is new but ot is always the same problem only one bill and when I try the second one nothing
Can you help me?
That is not a bill validator issue, that is a setting in the programming of your machine. First I would try buying the most expensive item in the machine using only coins, if that doesn't fix it then you have to change the bill validator setting in your machine
Is your business still operating? I didn’t see any phone number on your website or email to get in contact with you guys
We are here and operating. On the website click on "Contact us"
@ I sent you an email yesterday.
Is mei will accept philippine currency or recalibrate
do you have any ict p70 bill aceptors?
What a great video and she's easy on the eyes..
Are there bill validator that will gives bills back when u put a 5 in thanks
Yes
@@Robertodelgadorocks and do they reload them self when they except dollars or do the all go to the bill box and have to be reload manually
You forgot about the 12 volt models, great video though, could not have done the same quality job as you. :)
True, there are 12 volt models in amusement, however we specialize in vending, and though we carry some amusement items, we cater mostly to vending.
THANK YOU SO MUCH!!!!
Can you please help me out?
What do you need help with?
do you sell card/phone pay????
Unfortunately, we do not. Those technologies haven't reached the secondary market yet.
@@Vendingworks if and when it does become secondary market will you be selling?
@@DaveThuWave Absolutely!
Vendingworksnet I have a problem with my validator. It’s NRI G10 German. Please help !
@@Vendingworks are they anti jamming bill acceptor
Which part number has the bezel to fit a Standard Change Maker MC300RL ?
I just retired after 36 years in the Aerospace industry and I am looking to start a new venture. Is there any room for a guy with decent mechanical skill to start a repair business in bill validator and coin changer repairs?
I think number 7 is the led high Visibility one lol
Yea... too many numbers. I’ll call you when my vending machine needs to be fixed