Anvil 022: Pederson Device recovery
HTML-код
- Опубликовано: 1 апр 2021
- SOME parts fabrication was necessary to get this Pederson device to work at all. We show what you need to learn, not a tutorial. If you do not posses the skills to perform at this level, do NOT attempt. Support us: / anvil
Наука
The "oh absolutely" needs to be clipped into a meme.
Lol I think that is my new ring tone
Indeed
Damn, I was really looking forward to watching acraglass set and dry today.
The Pederson device was a pcc kit before pcc kits were a thing and its such a cool bit of engineering
Kind of like how the original M1911 prototype was a cool bit of engineering that became a respectable weapon after undergoing about a dozen design iterations. Sadly the Pedersen device didn't get that kind of opportunity for refinement.
@@ostiariusalpha modern pederson device when
@@ostiariusalpha The issue is that the Pedersen device is a PCC designed to fit inside an M1903 Springfield rifle. Not only is that a very impressive thing to pull off, even if it didn't work. But it's a pretty pointless task. The U.S. would probably have been better off issuing pistol caliber lever-action rifles.
@@LUR1FAX That's a lot more weight to carry an M1917 Enfield (which is what they would be equipped with if not for the Pedersen conversion kit) and a separate lever action, against inserting the smaller device and carrying more ammo mags. At least, ideally speaking.
@@ostiariusalpha Was about 15lbs of extra gear for the Pedersen kit.
Don't know what's scarier. That someone thought packing what essentially is a pistol into a bolt and chamber of a .30 '06 made sense, that someone managed to make it work, or Mark's socks.
I'm going to go with making it work.
I've seen scarier socks, but after watching the C&Rsenal on the Pedersen Device I am absolutely amazed that it worked.
Well, we still have 32 acp and 30 carbine inserts for 308 and 30-06. If someone makes a semi-auto bolt and mag adapter for a 308 that would be an interesting camp gun.
@@randomidiot8142 the Semi-auto part of that would be a pain in the ass. Bolt action rifles have a simple dropping sear with no disconnector. The M1903Mk1 has some extra parts added to work as the disconnector in the rifle.
I should add that I'm surprised that the Pedersen Device wasn't a full auto. I mean, they were planning on each grunt carrying some 400 rounds of ammo for it!
@@ScottKenny1978 The bolt action rifle trigger might not have the right stock trigger mechanism, but if you can make a semi-auto adapter that's just a small hurdle. A disconnecter on a system like that would be easy, like a tippmann 98 paintball trigger mechanism for example. Technically the tippmann is an open bolt, I know, but it would work.
I thought the pederson was from the bolt action magazine cutoff time period and before pcc/smg doctrine, so semi-auto makes sense to me..? 🤷♂️
@@randomidiot8142 pretty sure that ATF would not like the design if you were selling the adapter and the replacement trigger. A big sign sayings "you will commit a felony with a penalty of $100k fine and 10 years in prison if you don't install the trigger group" isn't likely to fly. "Easily converted to full auto" and all that. You'd probably have to have the buyers send you their rifle to install the new trigger and send it back with the semi-auto bolt.
While you're right about when the Pedersen Device was made, it was also in the middle of Schnellfeuer, MP18s, and the inspiration for the Thompson.
Not to forget that the extra bits in the Mk1 ruin the trigger pull.
That mill reaches a frequency i didn't know my headphones could reproduce. I wish they couldn't
Like nails in a chalkboard...although there's at least one...mebbe two, generation(s) that hasta Google "chalkboard"...
I didn't see a mill being used in this video. 🤔
The first time I ever heard of the Pederson device was back in 2002-2003ish I was at a local gun store and a 1903 with the Pederson cutout came in. Even though the owner was well versed in U.S. Military firearms he looked the gun up in the Blue Book and mentioned the Pederson cutout. Nobody in the store including myself had ever heard of the Pederson device. Over the years I heard it mentioned in several books and videos but nobody ever showed one. It wasn't until Ian over at Forgotten weapons did a video on one that I had any clue what it looked like. You are a very lucky gunsmith to get the chance to work on something so rare and valuable. You seem to get the pleasure of working on a fair amount of rare guns.
Mark is one of the only people I would trust with such a rare and valuable piece of history.
I love Mark's ultimate dad look with the new balance shoes and socks pulled up to his knees
Can't forget the Dayglo Pink laces!
I’m convinced Marks voice and mannerisms is what a gunsmith is supposed to sound like.
Only the good ones.
Ok... the intro alone deserves a like.
Getting a Pedersen to work ! Mega respect from across the pond, love seeing someone machine in the way my father & grandfather taught me, well done that man !
I don't know how I have been watching gun vids on RUclips for 10 years and just found this channel! Best channel on RUclips right here!!!
Great to have you aboard. Spread the word.....!
I'm a simple man, I see a Mark Novak video I click :D
Amen 🙏
Darn it I’m still waiting for the acraglass setting up video!
Oh hey its that Sasquatch from Ian's video
We should all be lucky enough to find someone who wants to get their hands on us the way Mark wants to get his hands on that Pederson device.
id watch you acroglass stuff, thank you guys very much for reuploading the old anvils, i missed many of them
I'm glad the classic videos are being reuploaded. One of my favorites was the rifles that got blown up.
I guess you particularly appreciated this job going across your bench? Watching you machine, I can imagine a thousand machinists cringeing, but the job gets done, and I think to myself, "this Novak fella is a sneaky *expletive deleted* and he gets a beautiful job done, ugly fashion". Outstanding!
I very much appreciate the mechanical and engineering indicative of every Anvil episode.
Just a few years back I came here to RUclips looking for a video of someone actually firing a Pederson Device. No beans. 😞
Now I've actually seen one fired AND torn down (outside of the patent drawings) - WOW!!!
You got your Man Card punched and I got my Nerd Box checked. Thanks, Mark! 👍
Two of my favorite RUclips Heroes .....Mark and Othias
RCH, I haven’t heard that since my Navy days. Well done!
LOL. I wonder how many people caught it.
Possibly the most educational channel on YT. Mark is a brilliant man. It's a shame YT is trying to suppress gun channels while promoting Cardi B WAP. Remember, America was built on the back of firearms and the firearm industry, not Cardi B's WAP.
I'm disappointed there wasn't a "watch acroglass set" video for april fools yesterday
I am pretty sure your man card has more holes in it than Bonnie and Clyde.
My dead great aunt was a monster please don’t use her as an example, many innocent every day people died at her evil hands. Like all of today’s mass murderers their names should live in infamy; an be not spoken to die in memories and remain as a dark spot in history. They should definitely not be used or glorified as a poor metaphor example for such a skilled craftsmen as Mr Novak’s man card. Thank you
@@Billio68 He's not comparing Mark to them, he's comparing the number of 'holes'. If anything, it celebrates the fact that they were shot dead.
The intro has lower framerate than the older uploads, but I still appreciate those re-uploads.
Wow! That’s real talent. You need to write book, sir. Not enough hours in the day for your genius.
the attention to detail is amazing
Damn, the way you said "oh, absolutely." Shivers! But yeah, this is one of my favorite episodes and I'm glad you reuploaded it.
Parting tool? Yeah, sure I got a hacksaw.
Errrrrrrrrch.....I just put everything on hold to watch this episode .....Awesome.
Gobsmacked. You have out done yourself on this one Mark....... Truly amazing
I salute you, Sir!! Gunsmithing and machining of another order, plus an acronym from the past I have never heard committed to film: “RCH”
Mark, I really learned something ! Using a backwards drill bit as a mandrel to prevent collapse of the collar AND not having the small part falling under the lathe! Thanks for the video!
its probably nowhere near as much of a deal as it seems, but I'm always amazed when i see tradespeople who've been trained in imperial/non metric talking about such small measurements, my brain'd be burning out trying to figure out the fractions, then again, maybe Millimetres can give you guys similar issues to start with.
in any case, always awesome to get see cool machining at work to get complex mechanisms to function! cheers!
My dude. Your understanding of engineering is duly awed and appreciated
A lot of the time I haven't a clue what you are talking about, but I could listen to you talk all day.
Pederson device!!! God, I wish I didn't have to take someone to work right now.
Let them call in late
Beats the hell outa taken yourself to work though, huh?
@@randymagnum143 It sure as hell does lmao
Part-Artist ... Part-Engineer ... Part-Warlock ... Mark Novak. Poetry in motion.
wonderful episode on a wonderful peice, thanks Mark and everyone else that helped
Bravo, I anticipate anxiously, waiting for more videos from you Mr. Novak love the time and work put into everything truly rare craftsmanship.
Is this a redo of the previous Pedersen video? Either way more Anvil and Mark is always good
It is
We are filming 097 and 098 now, this is 022 by request
Yeah, a lil confuificated myself.
I was confused as well
Thank you. I NEVER thought I'd ever get to see one of these, let alone getting to see one fired.
*Always* a pleasure, thanks Mark and crew
I learn so much from each of your videos.
They are very entertaining, I even like the music in the intro , and during some of the videos.
I have become much more tolerant of men and women, who charge more than Bubba,
down at the gun store, or car repair shop, or motorcycle shop, who give superior service ,
and always seem to get it "fixed right" the first time. I know now education ,and experience
are a very valuable commodity . Keep up the Good work. Thank You.
Holy cow what an engineering nightmare but for something that is over a 100 years old it cool. Mark another great job and very awesome episode. Glad to have your expertise continue to keep the mil surps going!
Great episode, loved seeing the lathe going. Brilliant!
We have a #5 Warner and Swasey turret lathe. It make jobs like these a snap. And you could set it up to make thousands of them, for that huge unserved Pederson repair parts market! 😉
I ran a Warner Swasey 2A, 3A, and 4A for 7.5 years making bronze bushings, bearings, and washers. We also had a #5 but I think I only ran it maybe once or twice after the previous operator retired. I was trained on the 2A with extended bed, then went to the 4A as my main machine, got laid off after 2 years. Then 60 days later I got called back and ran the 2A with extended bed for the remaining time I was there.
The 2A's and 3A were in very good condition. The 4A was pretty well shot it was purchased from a Texas oil field that used it for hobbing pipe, they didn't even have the turret and turret apron on it. It ended up at a machinery dealer in Cleveland who put a metric turret on it. My employer and his purchasing agent were not skilled in assessing machines and bought it anyway. So no matter what you did the O.D. and I.D. always ran at different feed rates due to the Imperial gearing in the the one apron and the metric gearing in the other. Those power chuck wrenches sure were nice though.
Awesome work! Thank you for preserving the history!!!!
Outstanding Job Mark! Purely amazing how the right way to do things and the end results comes together. Those trained RATS can be issues a great deal of the Time. Thank you sir.
Having too much fun at the lathe again I see Mark. And with the intro. Love it.
Man I've been trying to fix my old rifle for years now, I get it to work but next time it comes out of the safe there's always something not functioning. Mad respect you took on this job 😅
Love watching a skilled craftsman at work. Like watching Michaelangelo painting the Monalisa.
Fun to watch Mark truly engaged in a project!
I had about 900 rounds for the Pederson Device and in a moment of stupidity traded them off.
A friend who worked at the Rock Island Arsenal thought that there were probably blueprints still there for it. Wish he could have found them and made copies.
The 1968 22nd edition of Gun Digest has an article on the device with a list of existing units including one for the Enfield and another for the Mosin Nagant.
Never judge an artist by his tools or his methods. The proof is in the pudding.
Yes, but my heart broke when he was marking with the caliper on a running lathe. Hopefully, that caliper was designated for rough work, and that he keeps another one for accurate measurements.
@@sidekickbob7227 if you own a calliper you probably an four or five of them. I love my high end Mitutoyo but my Ali Express tools get way more use and I won’t cry if I drop them on the ground.
@@john-paulsilke893 Yeah, I always buy the upper middel quality ones (mitutoyo?), and degrade them after they get used. I keep one for accuracy, one for daily use, and one rough for marking. But I would never marked a piece in the lathe, while it was running. That's just abuse.
Or his shoes.
Amazing job on this problem working with 2 thou clearance to either side and a finicky spring od/id. Great episode. :D
Cool I get to see something new all the time with you thank you
OMG.... that was a great intro!
I love the sound when shooting
The US Army Motor Pool all of which were German except for one 1st Lt who always reminded me that he was a college trained shrink at Oberammergau, would fabricate many Teletype parts for me and the fee was a carton of Winstons ($1.25 my cost) They could fabricate a new TTY part from scratch faster than I could order and receive parts from 4th Signal Battalion Army Supply. I bought a 59 VW from the motor pool for 2 cartons of Winstons and 2 half gallons of Jim Beam Oh, and a few jars of peanut butter. I moved to another Base where the motor pool was great at washing a vehicle could replace a bad vehicle part with a new part and that's about it. I sorely missed not being around the best fabricators in the world any longer.
So glad to have found this channel! What a gem of good content! :)
i laughed wayyyy too hard at that afterglass joke in the beginning.
Sweet! Love these oddball rabbit holes!
103 years ago, this video would have been treason.
Leaking classified info?
@@Tunkkis yup.
Not treason, though. Treason has a very, *very* limited definition in US law.
@@ScottKenny1978 is 'supplying classified/secret weapons information to enemies of the state' not covered by it?
@@MortRotu Has to be in a time of war. Otherwise, there are _officially_ no enemies.
The Constitution is *very* specific about Treason.
@@ScottKenny1978 interesting, so how did that apply to leaking info to the USSR?
Commend for engagement, your channel and C&Rsenal’s content shows such beautiful dedication and passion. I wish I wasn’t in destitute so I could support both of you guys.
i've been interested in seeing this fired since Ian at forgotten weapons covered it, thank you for the upload!
l got a look at one of these back in 1967 l think.....Thanks my friend...Excellent....!
Been waiting for the fun n games you must have had with this since the primer episode on it. Well worth the wait =)
Several machinists clutched there chest in horror when that hack saw came out.
and yet none of them with the rep to be brought a pedersen .
@@donbot5000 well ya they are machinists not gunsmiths. That would be like bringing your dog to a Doctor instead of a Veterinarian.
I didn’t know you were in Charleston! Gotta love it there, so much history and it’s beautiful.
If only these had been surplused instead of destroyed
How do you only have 73k subs? I love your videos.i very much admire the knowledge you have for antique arms and armory.
I always wanted to know how one of those worked; thanks for a great video.
I just love the beginning of the video. Just awesome.
Damn I was all hyped for the Acraglas Curing footage. I guess Pedersen device video will be ok then.
That moment when art and engineering meet, usually beautiful but rarely useful, always interesting though, cheers for sharing this.
Mark, an amazing video and you are the machinist daddy-O!!👍👍
You are a great teacher
this video is invaluable! thank you for taking the time to do this. my suggestion for future videos would be to display a shop drawing of the piece of metal you are making somewhere on the screen, while using the lathe, etc. Otherwise 10/10 informative video :)
Mark. Thank you. Splendid show case .
Talent and class personified.
I hope you've found time to instruct some apprentices. Not only in knowledgeable techniques. But also
humorous demonstration.
You are a class act. As are your supporting partners in prime (artisianship).
I've had the privilege of 14 apprentices.
@@marknovak8255 I'd move and whatever else I need to. To learn from you. Always wanted to be a gun smith but have no clue where to start.
This is good stuff. I machined some tiny parts and it’s not easy.
"Mics lie." Truer words were never spoken.
The 'Oh, absolutely," in the intro was truly villainous. You have a future in voice acting my friend.
Got TWO 47 or 48 MFD caps in my stock? get out of jail cards, or rabbits in my hat? handy for STP's on gas stations, but now they are clutter as I retired.
I LOVE IT!! This is Artistry, Engineering, and just good old-fashioned Determination with an Inquiring Mind!
used to be a common value in tube-era electronics
two absolutely great guys
The international man-card congress approves this video.
Congratulations.
Regards,
Marky
Mark has inspired me to become a gunsmith. I’m working on getting there someday
Mark Novak a new upload ok with me I'm just doing the laundry so I've got some time to kill and I've always wondered about that device thanks for your taking us along with you down that rabbit hole .
By the way, love the intro. You too are a classic.
I was just here for the Acraglass
It's ok tho. I'll view both when available.
I love this stuff.
Lathe work is always so satisfying.
That music in the beginning always gets me.
Great video Mark
Oh thats interesting indeed. Well done. Ive a Mk1 myself. Excellent
1st time viewer. The sound the lathe makes shaving that metal is at once both terrible and oh so satisfying.
I’ve seen Russian security cam footage of a man getting spun to death my an industrial sized lathe. I can never look at them the same way again.
Amazing work!
Thanks for sharing!
Mark is a freaking genius. Modern day John Moses Browning.
Well done, Mark!