Behringer Xenyx 802 Power Plug Repair - 1000% Timelapse

A pin from the AC power supply broke off in the mixer's power receptacle, requiring replacement. This is a timelapse at 1000% speed of me replacing the plug and cable connector.
*I am just a hobbyist and do not claim to have any proper soldering/desoldering skills. I am just doing this for fun. I know I have plenty of room for improvement.*

[@aarr469]

Greetings Hello .. I bought a behringer eurorack mx 802a on eBay without powersupply... Based on research the powersupply thst comes with it is 18v for 2 of the pins (xlr) at 800 mah.
However the powersupplies being sold on eBay for it is 17v for 2 pins at 600mah... Can those eBay power supplies work?
Thank god for translation

[@germibestia]

I have gotten a Xenyx Q1002USB without the power supply. I have tried to scout it on the net but it seems that it's not produced anymore...
Anyone has an idea where to find one, or where to find the transformer with the 2x20V secondary?
How is the wiring? Do you have only 3 wires coming out????
What about the second 3.0V?
Also I am puzzled by how the device create the 48V phantom tension...

[@maickproducciones592]

hola amigo, tengo una Bheringer Eurodesk SL3242FX-PRO y resulta que solo tengo señal en los led del Master en el canal "R" por que en el canal "L" llega pero es minima, de echo no me la marcan los led verder de tan poco que llega. revise los fader, de todos los canales y el del Main y todo esta bien. que podria ser ?? saludos y gracias

[@elizabethjosefinaylarrazad8402]

Nesesito saber de cuanto es el cargador que debo utilizar i como conectar los cables en la placa

[@elizabethjosefinaylarrazad8402]

Nesesito saber la conexión que se iso en la placa de la consola

[@chavyto20]

Hola brot justamente tengo el mismo problema pero por la rapides del video no alcanzo a ver los detalles de las conexiones, me podrias ayudar con un diagrama o pdf de como hiciste la conexion de las fichas porfavor

[@peroquecosache]

Hola! Pudiste encontrar el diagrama? Estoy en la misma situación!

[@davefelps1021]

Where did you find the new jack?

[@chattin1]

Couldn't find an exact replacement, so I just sourced one from an electronics shop that roughly fit, then modified the original power adapter with the matching plug.

[@MateuszPetkiewicz]

@@chattin1 weren't you tempted to install a power switch since you disassembled it?

[@chattin1]

@@MateuszPetkiewicz That...would have made a lot of sense!

[@andreyk95]

Pra que essas correria toda