Making a Simple Tray on the Shapeoko 3
HTML-код
- Опубликовано: 31 июл 2024
- A bull nose endmill, known in the router world as "bowl (and tray) bits" can enable you to make some nice looking profiles with rounded edges using very simple techniques. Here's how to use one to make a tray on the CNC.
Project Files: cutrocket.com/p/5d444e8e37704/
Learn more about our lines of Desktop CNC machines at carbide3d.com
-----
Music by / liqwyd 
Наука
Great vid man! The more I watch your channel, the more I learn. Thanks for all the work you do and keep at it!!
Thank You. I always enjoy your take on projects.
I found a 3/8" multi-tool blade fits into tight radius projects for cutting tabs. You don't have that issue here, but it may be worth $.02 in the future.
Great information as always,look forward to all your videos.
Would like to see some videos based on thread milling and the difference in bits.
I always add another profile around the outside about .25mm in and run another tool path at full depth to clean up any lines, most the time it’s perfect and doesn’t need sanding
Like it. I may make one.
Awesome video. Can you explain how you're setting the offset for each bit? I see you use the touch probe to set z, but how are you setting the x,y offsets?
As you've used a Radius Cove bit for a normal router, how could you have used an External Roundover bit to shape the base outer curve/round over? Decreasing radius cuts until contact is made or other ?
Love your videos...but you gotta slow down man. Remember lots of us are new to this ;)
Any chance you could do a video on creating box/finger joints in Carbide Create and show the toolpaths as well. I want to be able to cut them off the front of my xxxl shapeoko
Jeff
Thanks. I did those exact settings and it says its going to take 30 minutes just for the pocketing. Yours says 8? What gives. Thanks.
Looks like now carbide 3d channel is Winston's now.
Just bought an XXL, having trouble with it setting the depth of cut correctly,and not cleaning the whole pocket path,and with having trouble with the internal library working well with changes
Please shoot us an email (support@carbide3d.com) so we can help you troubleshoot.
Where can I find this bull / bowl nose end mill? all I can find in amazon is round nose ones.. which would prob give a similar effect / finish...
Just search 'bowl bit' on Amazon.
Carbide 3D great... didn’t think of that! 😂 joking aside, nothing shows in amazon.ca
Where did you get the rounded end mill from ?
Been looking all the usual places and can't find them.
Amazon. Search "Bowl Bit".
@@carbide3d Ok, thanks, found them now :-)
Could you tell me what you set the parameters of the bowl bit to. So I can add one to my tool path.
Could not catch the frame you showed.
Jeff Peters
If you slow him way down and then use the pause maybe you can get the parameters you want. That is what I am going to try. He was FLYING through it for sure!
@@terry2346 what diameter bowl bit do you have and what is the shank size
@@resorter66 Don't have one yet but all of them that I would get are 1/4 inch shank
@@resorter66 I have a 7/16 bowl bit with 1/4 shank. Might get a 3/4 so I can use the same size as the author is. Also would take about half of the time to clean out the bottom of the project! :)
any body else unable to choose their new bowl end mill when probing in carbide motion?...
Probing in X and Y only supports a few preset tool diameters. Easiest way around it is to either:
1) Load up a different/supported cutter and probe for X and Y, or
2) Just eyeball your starting position in X and Y.
For probing Z, tool diameter doesn't matter.
@@carbide3d ok, thanks! Appreciate the quick reply!
In all my years of woodworking and CNC experience I've never heard that shape of router bit as a 'bull bit'. There is a bull nose bit, ball end bit, round nose bit. But never heard of a bull bit. But cool little tray.
Not "bull bit", "bowl bit".
Too Fast!. Are all your videos for experts??
Great info but sllllooooowwwww down. An extra minute to go through it a little slower would be nice.
Playback Speed at 75%
@@JohnColgan. Or even 50% :)
First
;)
On every step he is going too fast. Frustrates trying to do starting projects when all Carbide have is this show off guy receiving compliments and homage. Everyone have a starting point, in case you forgot!
Winston. I respect your vast knowledge and complete understanding of your CNC abilities. You know your sh@t!. I'm sure I'm not the only one that considers you condescending. Not everyone has your abilities and yet your videos clearly indicate that you don't care.
You speed through your tutorials like you expect everyone to know what they're doing. You explain way too much and too fast. This video is a perfect example of that. You rushed thru setup like you expect everyone to understand. We all don't understand speeds, feeds, plunge, stepover, etc.
I used to enjoy watching Carbide 3D tutorials until you took over. Sorry, Carbide 3D but you screwed up. Winston, Come down from your dream cloud and show a little consideration to those of us who are not at your level.
Goodbye Carbide 3D tutorials. I'll be back when you find someone more respectful to your customers.