You made ma day!! There was something blocked my mill and so I have to disassemble it. Without your video, I would have broken everything 🙂. Thank you very much and have a nice weekend. Greetings from Bielefeld/Germany
Great job! This is one of the most difficult machines to dissasemble to get at the grinder and I could not have done it without watching your video. Thank you so much!
Excellent. I was going to make a tuto cause as you, i was frustrated to not find reasonably good instruction or video (which was not a clickbait in 8parts occulting the tricky points) when i did my first disassembly. Yours is top noch , i couldn’t do it better. thanks!!! And one thumb up, one!
Thank you so much for this video!! My husband put chocolate chips in the machine in stead of beans ... so it was melted all in the grinder. I coulnd't get to it, almost sent my machine to a dealer and as a last resort thought about youtube. There's just 1 problem ... 1 have 2 screws left haha, but at least I have coffee again!!
Thanks for the video, it was very valuable. I got the device from the neighbor who bought a new one because the old one gave too cold coffee, thanks to your video device I opened it to check the heating element and temperature switches. Then I realized that I should have checked the device for proper functioning before to take it apart. So put it back together and tested it, the coffee temperature was 55 degrees, the device was descaled, it didn't work according to the descaling program, so just made ""coffee"" with descaling agent. After this the coffee temperature was 65 degrees I think this is OK. I now know what a "Saeco Pico Braristo" looks like inside. Greetings Hans Wijler.
Hello Wunjio. Excellent video. I' ve had exactlly the same problem as you had, larvas inside the coffee grounds even I clean the machine monthly. Most probably because of the cofee beans. With your help I succeeded to clean the grinder and around it. Thank you very much and all the best for you. But please let me know, are you Romanian ? At minute 4:58 you say "...este rupta - this is broken".
Close enough, I am Italian (so I speak a Neo-Latin language): I say “aaah, questa è rotta!” But I’m not pronouncing “q” so strongly so it sounds like “uesta è rotta” 😊
HOPE IT HELPS SOME OF YOU! If your machine is not dispensing coffee but hot water works, follow these steps: 1. Change the brew group. 2. Replace the rubber bands. 3. Deep clean the espresso dispenser head by taking it apart and replacing any worn-out rubber bands. Thank you so much, Wunjio. Without your help, I wouldn’t have made it this far. Best regards,
Thank you kindly for this instruction video...just need to replace the main seal of the brewing unit...and hopefully that was it ! (Machine was recently always wet underneath when used)
if you get the gear asembly replaced in the wrong position, you dont need to keep trying to get it in the right position. there in a lobe on the gear that actuates a switch, stopping the gear in the proper position. you are able to put the handle of a plastic spoon in the slot that the tab on the brew unit is. then put another plastic spoon handle in the slot that the tab on the door goes. This will trick the machine intothinking that the brew unit is installed and the door is shut. Push the espresso butten and the machine will cycle and put the gear in the proper location. be aware of hot water and coffee grounds. Also use plastice spoons to insulate yourself from the voltage
You made ma day!! There was something blocked my mill and so I have to disassemble it. Without your video, I would have broken everything 🙂. Thank you very much and have a nice weekend. Greetings from Bielefeld/Germany
You saved me at least $900. We didn’t have quite the same machine but close enough and your video saved my sanity. Thank you!
Great job! This is one of the most difficult machines to dissasemble to get at the grinder and I could not have done it without watching your video. Thank you so much!
Excellent. I was going to make a tuto cause as you, i was frustrated to not find reasonably good instruction or video (which was not a clickbait in 8parts occulting the tricky points) when i did my first disassembly.
Yours is top noch , i couldn’t do it better. thanks!!! And one thumb up, one!
Thank you so much for this video!! My husband put chocolate chips in the machine in stead of beans ... so it was melted all in the grinder. I coulnd't get to it, almost sent my machine to a dealer and as a last resort thought about youtube. There's just 1 problem ... 1 have 2 screws left haha, but at least I have coffee again!!
Thanks for the video, it was very valuable.
I got the device from the neighbor who bought a new one because the old one gave too cold coffee, thanks to your video device I opened it to check the heating element and temperature switches. Then I realized that I should have checked the device for proper functioning before to take it apart. So put it back together and tested it, the coffee temperature was 55 degrees, the device was descaled, it didn't work according to the descaling program, so just made ""coffee"" with descaling agent. After this the coffee temperature was 65 degrees I think this is OK. I now know what a "Saeco Pico Braristo" looks like inside.
Greetings Hans Wijler.
Hello Wunjio. Excellent video. I' ve had exactlly the same problem as you had, larvas inside the coffee grounds even I clean the machine monthly. Most probably because of the cofee beans. With your help I succeeded to clean the grinder and around it. Thank you very much and all the best for you. But please let me know, are you Romanian ? At minute 4:58 you say "...este rupta - this is broken".
Close enough, I am Italian (so I speak a Neo-Latin language): I say “aaah, questa è rotta!” But I’m not pronouncing “q” so strongly so it sounds like “uesta è rotta” 😊
HOPE IT HELPS SOME OF YOU!
If your machine is not dispensing coffee but hot water works, follow these steps:
1. Change the brew group.
2. Replace the rubber bands.
3. Deep clean the espresso dispenser head by taking it apart and replacing any worn-out rubber bands.
Thank you so much, Wunjio. Without your help, I wouldn’t have made it this far.
Best regards,
Thank you kindly for this instruction video...just need to replace the main seal of the brewing unit...and hopefully that was it ! (Machine was recently always wet underneath when used)
Thank you, now my Pocobaristo is destroyed😂. And I'm waiting for the water level sensor. By the way I had no spider's web😉
Tutorial very nice and pro !! Tks
Really appreciate your vid! Could disassemble my Saeco Picobaristo, fixed it and live happily ever after (for a few years more 😁)
Dziękuję bardzo za pomoc :)
Thank you very much, your video was very helpful.
Many thanks! I have to change the grinding motor.
Merci merci merci pour cette vidéo
Sei veramente brava grazie ciao
Many thanks for this video ❤
if you get the gear asembly replaced in the wrong position, you dont need to keep trying to get it in the right position. there in a lobe on the gear that actuates a switch, stopping the gear in the proper position. you are able to put the handle of a plastic spoon in the slot that the tab on the brew unit is. then put another plastic spoon handle in the slot that the tab on the door goes. This will trick the machine intothinking that the brew unit is installed and the door is shut. Push the espresso butten and the machine will cycle and put the gear in the proper location. be aware of hot water and coffee grounds. Also use plastice spoons to insulate yourself from the voltage
I love it!!! thank you so very much!!!
Sehr schön
grazie mille
☺
saeco xelsis!!!
!!!