Ive been building and messing with computers for a few years now, looks to me like a basic computer case fan, readily available and cheap enough that it wouldn't matter if it only lasted a few weeks!
The regulator on this prototype has been re designed on the production models to give you a much more control on the power, once they are run in you can get it to rotate slowly.
you can also find acceseries ther like the shovel ,blower fan and poker parts nuts,bolts whistles ect.its like a big hobby store for live steam modeling
With pressure at 60psi and plenty of volume I am starting to think the pistons may be missing, it pays to be very careful when buying from a stranger when they tell you that it runs very well, it looks nice on the shelf though.Thanks again.
We are starting with charcoal soaked in lighting fluid and then running on anthracite. We sell the correct size fuel in 20KG bags for running this engine.
What a amazing engine. really liked watching it. How about using the flywheel and powering something? Thanks for sharing it with us. Get steamed and steam on! I do not have a 1" but with my Momods and Wilesco's, I would question using tap water. I use distilled water myself, being that tap water really builds up deposits in the boiler, but it may be different in the 1".s.
how long does this take to get into steam from cold and like how long does the water last in the tank and how do you put the water in the boiler is it with a injector or pump and would this be ideal for pulling small things along using the drum winch
+william burgess it should work fine on air, the only point to remember is the cylinder won't get oiled correctly so try to get a thin oil in there, where are you trying to put the air in and what psi, cfm's is your compressor?
Hey your in the Maxitrak company right. Well can you tell your boss or whoever sets-up the new businesses to put one in the U.S. so i don't have to go to Britain to buy one please.
Ive been building and messing with computers for a few years now, looks to me like a basic computer case fan, readily available and cheap enough that it wouldn't matter if it only lasted a few weeks!
The regulator on this prototype has been re designed on the production models to give you a much more control on the power, once they are run in you can get it to rotate slowly.
mine does not run slow but stops, does it need running in?
This is the first time we have Run it on coal and were very impressed with the results. despite a leaking blower valve it still ran well.
Yes it does and we are hoping to source a scale cable to go with it!
Good news, you can now buy some of our products direct from accucraft ride on in the US! including this Fowler!
Al
Same oilcan and Black & Decker Workmate that I used to use when I ran my Mamod SE2A as a lad.
you guys should have a cable and a miniature plough made for this thing
you can also find acceseries ther like the shovel ,blower fan and poker parts nuts,bolts whistles ect.its like a big hobby store for live steam modeling
With pressure at 60psi and plenty of volume I am starting to think the pistons may be missing, it pays to be very careful when buying from a stranger when they tell you that it runs very well, it looks nice on the shelf though.Thanks again.
We are starting with charcoal soaked in lighting fluid and then running on anthracite. We sell the correct size fuel in 20KG bags for running this engine.
What is the correct size? Grains or beans?
@colinthedj123 Yes it sure does, it has a scale one on the back and a hidden one underneath for pulling larger loads!
Yes , a great job getting her moving, “ top Hat “
What a amazing engine. really liked watching it. How about using the flywheel and powering something? Thanks for sharing it with us. Get steamed and steam on! I do not have a 1" but with my Momods and Wilesco's, I would question using tap water. I use distilled water myself, being that tap water really builds up deposits in the boiler, but it may be different in the 1".s.
how long does this take to get into steam from cold and like how long does the water last in the tank and how do you put the water in the boiler is it with a injector or pump and would this be ideal for pulling small things along using the drum winch
@Axbent yes apparently that is true, you should use rain or tap water!
Do you recommend little and often with firing?
hi i have just brought one of these and i was wondering were you got your shovle
quick responce woud be apreceated
is that motor to draw the air though the fire to steam it up quicker
How do you set your water pump to fill the boiler?
thuroghly impressed, now make a 1942 john deere A model
@Axbent no they run on any water, rain, tap, river you name it!
great video and engine how much do they cost new
I wish I had one.
Is it welsh steam coal by maxitrack you are using?
Are you firing with anthracite or bituminous coal?
hello there i own a 3/4 inch allchin and would like to get the water filling that you showed 1:00
I should have said my 1" scale Maxitrak is up for sale, valves need timing.
Great little engine! What do you soak your charcoal in?
lighter fluid or you can use fire starters and break them up into little pieces
Do you use dry Welsh steam coal from maxitrack?
A credit to you,very very nice.
Beautiful!
Where do you get those coal shovels from?
What coal do you use?
were can i get an inexpensive coal or butain steam tractor online or in the us?
I have a 1" Fowler and have tried to run it on air with no luck, any help would be of great help. Thanks.
+william burgess it should work fine on air, the only point to remember is the cylinder won't get oiled correctly so try to get a thin oil in there, where are you trying to put the air in and what psi, cfm's is your compressor?
when you guys commin out with the 2 inch scale fowler? ill be your first customer ;)
Now THAT'S an rc car! Er, traction engine!
@maxitrak can it pull peeople? Thank you
how did you light the charcoal
can you plow a patch of earth with a pair of these models?
What size is your coal?
Hey your in the Maxitrak company right. Well can you tell your boss or whoever sets-up the new businesses to put one in the U.S. so i don't have to go to Britain to buy one please.
has it go enough power to pull a person
whats in the glass jar at 0:13
Is this a compound engine?
how much can this model pull ?
where can you buy these??
How much does this engine cost?
so where can i find one of those heat resistant fans to draw the fire? anyone who can help let me know
@TractionAlex
i think its about £3500
@maxitrak how much for this tractor
dose it have a hich
@maxitrak how much is it
@maxitrak allways want but there are really deer
My Markie is up for sale $4000.00 needs a little attention.
Just get a cheap pc cooling fan.
what coal do you use?