Hoover Vacuum Cleaner Disassembly - Vacuum Cleaner Repair Help
HTML-код
- Опубликовано: 1 окт 2024
- Repairing a Hoover vacuum cleaner? This video demonstrates the proper and safe way to disassemble a vacuum cleaner and how to access parts that may need to be tested and/or replaced.
Here is a list of the most common vacuum cleaner problems:
Vacuum cleaner belt keeps breaking
Vacuum cleaner brush isn’t spinning
Vacuum cleaner motor doesn’t run
Vacuum cleaner doesn’t have suction
Click here to purchase replacement vacuum cleaner parts:
www.repairclini...
Additional vacuum cleaner repair, troubleshooting tips, help with finding your model number and part replacement videos can be found on our website:
www.repairclini...
Tools needed: screwdriver
Connect With Us!
plus.google.co...
/ repairclinic
/ repairclinic
/ repairclinic
Join our free VIP email list for discounts and money-saving tips: tinyurl.com/pnn...
Check out our blog: www.DIY.RepairC...
Don't forget to like and comment on this video, and subscribe to our channel!
The next step is to throw it in the trash
I don't know why it is but I like working on Hoover Vacuums. I should of gotten a job at Hoover. But a last
Amazing, a household appliance that should run with no problem requires constant maintenance and cleaning, If I wanted this problem, I should have bought a high performance sports car. What a bunch of crap. I got a Hoover tunnel and thermal switch went bad, after using 6 times. They sent me another one, Same problem happen after using it 6 times. Now they tell me to eat the problem. They use a warranty date of the date the product was manufactured and not the date of purchase. Good Luck if you have this thermal problem.
My on off switch wont activate the vacuum . It feels flimsy. the switch is just above the cord wrap. Hoover windtunnel 2 UH70815. Cant get the back off
Hi can you help me plzmy hoover belt has just gone bit also lost power at the same time how do I know what's broke ??? Or what new part it needs please help somebody ??? Thanks in advance
I have a Hoover vacuum cleaner. I took off the bottom part to replace the belt. When I took it apart a C shaped metal piece that holds the wheels up for the adjustment came off. Can't figure out how to put it back
Well this was informative although I have a UH 72600. I don't think this is gonna work...
The wheels on the vacuum cleaner go round and round
Would be nice if they sold the little grey BUTTON that clips the hose in place , To the lower hose fitting ?
My small wheels, Carpet adjustment wheels on my U5175900 keep coming off what am I doing wrong???
I would love a clip on how to expose the motor on an Hoover Dust/Manager, has I have cleaned out all the filters & replaced those but the Hoover still cuts out after around 10 minutes of usage. l have checked every thing else even the Rubber Belt, but I can not get the cover off the motor enclosure after removing the 2 Philips head screws that I can see. any help Greatly Appreciated.
lo solucionaste?
You took everything apart but the part I need...when I step on the button to engage the belt/beater bar it won't engage.
me too wtf
Thank you so much for this video. I had a retractible cord that would not fully come out and without this video I would not have figured out how the heck to get that cord cover off. I'll def be subscribing to your channel!
Cool thanks!
Good video, unfortunately, I need more information on why the retractable cord mechanism will not let the cord stay out of the mechanism.
Same, they tell you how to get to it but not how to fix it.
Where can I get/ buy the screws for the bottom of the vacuum...I lost them🤔😭 when cleaning it
I have a shipping bolt that is in the way of the handle insert. It has what looks like a fixed washer on the end of it preventing me from undoing the screw. Should I take it back? Not sure what else to do. Thank you!
No electricity, it fine prior to that.
I want to find out what's wrong with my floor level adjustment. This did not address that.
WHY did you start making them out of PLASTIC????
Great video - extremely helpful! I have a Hoover Windtunnel T-series, Model #UH70210. Was working on removing the motor housing but then came to a screeching halt - this model has a light bulb. Even after removing the light bulb, the socket prevents me from completely removing the motor housing. What's the trick?
You may have to disconnect the wires from the light socket. If they will not come off the socket you might have to pop the socket through the housing with the wires attached. Even with the light housing attached to the wires you still should have enough room to set it aside and remove the motor.
All good but doesn't explain how to fix a siezed agitator brush which causes the belt to burn and break. This can be done by removing the brush, removing the two black screws along the brush shaft and inserting good household lubricating oil. Then tip the brush both ways to get the oil to the bearings and work the ends till it frees up. Took all of five minutes. Re[place the screws as soon as you have inserted the oil or it will drop out on your carpet!
the spring for the multi surface selector fell out where do i put it? the brush wont spin because of the spring not being there
Yeah help me with the Handle
I took my vacuum apart and cleaned it now can get back together
L
I have the hoover vacuum model uh70120 and I'm trying to clean the cord housing due to a leaky filter which case alot of dust build up but the built of the vacuum in this video is different from the one I have. Mines don't have the clips to remove and I can't get it open. Can you help please 🥺
This is too much
Where are you? A few questions about surface selector switch have been unanswered. lol Mine works but it doesn't lock in place to disengage beater brush. Model UH30300
great tutorial but u left out front wheel assembly which is what I needed. For all u did cover GREAT JOB!!!😉 THANKS char
....... shouldn't there be a set of wheels at the front of my new Whirlwind as well as the ones at the back..... it is rather difficult to push over carpet!
I'm disappointed at the power cable length which is very short and restrictive.
I have a windtunnel 2 UH70832 and the off/on switch stopped working. Is there vidoe that shows how to fix it or can someone direct me in the right direction?
Same with the pedal when you step on the button does it stop the agitator rollbrush from turning completely or do you have to keep your foot on pedal button to keep it stopped. When the vacuum is placed in the upright position, the agitator brush is suppose to stop turning, is this correct? Cause mine keeps on spinning.
Thank you for helping me fix my vacuum.
Hi,
Can you please make a video for the vacuum cleaner that runs but doesn't pick anything from the carpet!
I washed the filter and cleaned the machine as much as I could, but didn't work. I saw a couple of videos but they didn't help
Thanks
Julia Morente
1 second ago
Can someone tell me what kind of screw is the one attaching the handle to the vacuum? and where can I buy it? I have a Hoover Windtunnel 3 Pro and cant attach the handle because I lost the screw. Thank you in advance!
God bless you richly I used to do this kind of work I can't get the energy up anymore with heart and lung problems I do software more pair you can fix the screen real simple the packaging tape or gorilla clear tape depending on how bad the crack are
Video was so helpful. Your reward - I ordered a filter and replacement part from your online store!
Thanks, that's awesome.
do you have any idea how to remove the rear wheels and the shaft? I gotta replace the base part but the wheels are never taken out.
+Younjoo Lee We do not have a video for that procedure.
I remember having a this when I was a baby it broke my mom throw it out I cry
thankyou sir, just fixed a simple issue based on your video. a clog in the house where it snakes into the bottom. Full of dog hair and pine needles from Christmas. Just needed to see how you disassembled the vacuum cleaner.
can't screw the top off, like its glued on
My Hoover vacuum filter bag is full already , where I get the new one, before I got it from London Drug, but they don't have anymore.
I really need to know where the metrovac filter goes
how do i recharge the batter on my vacuum if i dont have anything to charge it with??. taskvac-vacuum
+Joe Arizona You would need the charger. Get your model number and enter it into our website to find parts including a replacement charger.
kool, ok thank u very much ill do that rite now.
My Hoover Wind tunnel vac just stops working due to overheating. I unplug it and once it cools down it starts again. What is causing this?? I've cleaned everything I can in it.
+Jean Ryder The motor could be defective if everything is clean.
Help, I have a clog somewhere in the hose on my Hoover Windtunnel 2. I cannot get the hose separated from the vacuum up by the handle. In your video you just twist the hose loose. Doesn't work so well on mine. The latch seems to have a little piece that will not let the slider come out of the groove. Sucker flat will not disengage. Is there some trick I'm missing?
Take it outside and pour hot water on the latch and hose to see if it will loosen up. Alternatively, try using a small screwdriver to help pry it loose. If you do this, be careful not to damage the hose and fitting. They sometimes get stuck if they haven’t been taken apart before.
I appreciate the response. We'll try that. There seems to be a notch at the end of the slide area where the hose slips into the vacuum. That seems to be keeping the hose from coming off. We thought perhaps that was a defect in the plastic, but then again it could be there to keep it from just slipping apart. Will give your suggestions a try.
got..it....thanks....would. be a nice..optional..feature..to.have..a..extended...cord..line..like...the..back.vac..tech..I.experienced..in...1983...
MICHAEL A.l MICHAEL MORALES use the space bar dude lmao
@@rickyspanish7851 ....seriously
great video, thanks
i have a uh30310 and it doesn't glide well. need to push really hard.
all the wheels turn but very difficult to move around.
thanks
+nellspop1 The rollers could be worn or something caught inside it causing issues.
can you please tell me where the rubber wheel goes for the cord rewind assembly part H-304081001
+Ramzy Kilic We do not have a video for that part number.
How do I put spring back on my vax Hoover
I have the same vacuum model. My surface selector switch is broken. How to repair/replace?
+jridge16 This video shows how to disassemble the vacuum to get to the switch. Take it one step further and lift it out of the housing and disconnect wires.
+RepairClinic.com I have a Hoover wind tunnel model uh70120 and when I tilt the vacuum in the front it makes a squeaking noise can it be the motor or belt because the vacuum works so it cant be motor
Family Guy's New Brian narrator
Great videos, helped me fix a screw issue with my top handle!
model :UH70241
MFG. : G13 A AT
Rajasekhar Kishore V
That’s the same model number I have. But I cannot figure out how to disconnect the upper large hose so I can declog it.
Do a Bissell vacuum disassembly
So Far, So Good
H
awesome. I fixed the cord! Thanks!
+Fawn Sorkoram Awesome!
Thank you! I fixed the hair tangled brush! I love Hoover vacuums.
Cool thanks Mary!
Yes I need the surface selector toooo
What vacuum cleaner is this?
Hoover wind tunnel Paws
Love these videos!
You guys have saved me. A TON of money.
Cool thanks!
how do I reassemble the surface selector?
+Alex Linthicum It varies from model to model.
Thanks....
saa0aap
Thank you for saving me from opening the cord rewind by pry-bar 😜 Good job!
Everything but the part I need to take off....the clear plastic part OVER the beater bar. I need to clean inside it.