You are the real MVP for this!!! I’ve been wanting to redesign all my stickers with an easy peel tab and now I know how! I have a silhouette but no matter what I do the alignment gets off about halfway down my sheet so having a way to do this with the cricut is going to be a game changer!!
Hi there!!I have a small channel where I make Vlogs that you will enjoy.If u have a time,please do check it out!And we're so close to 300 subs!Thank you🥺❤️
Hi there!!I have a small channel where I make Vlogs that you will enjoy.If u have a time,please do check it out!And we're so close to 300 subs!Thank you🥺❤️
Hi there!!I have a small channel where I make Vlogs that you will enjoy.If u have a time,please do check it out!And we're so close to 300 subs!Thank you🥺❤️
This would be so much easier on a Silhouette, because you can cut two different depths on the same file: you could make a shallower (kiss) cut for the sticker itself, and a die cut for the entire sticker.
@@4lexa I'm assuming you change the depth of the blades, one blade being deeper, one being shallower. I'm not sure what the cut settings would be for this particular sticker paper, but maybe OP knows?
@@SmittenKitten.Hi there!!I have a small channel where I make Vlogs that you will enjoy.If u have a time,please do check it out!And we're so close to 300 subs!Thank you🥺❤️
To make an easier and faster border in procreate directly, what you can do is go to the selection tool, the one that isn’t the lazo one, and on your lineart, or layer in which you have everything, tap on the background and select invert. Then when you already have selected everything, go to a layer below everything, and with the selection still on, paint everything with white. After that turn the selection off, go to Gaussian blurr and use it as much as you want the thickness of the border to be. Then select that layer again and invert, now with a brush go over everything with white, and you should have a much cleaner, faster and easier border. Sorry if it’s confusing, hope it helps anyone!!
Hi there!!I have a small channel where I make Vlogs that you will enjoy.If u have a time,please do check it out!And we're so close to 300 subs!Thank you🥺❤️
yup! Also for people using clip studio paint, duplicate your lineart layer. Then put it to the very bottom and turn on "layer border" (you can find it in the "layer property" section) that way you have a clean border without much effort. At least that's how I usually do it
Hi Susan! I used to watch your sticker videos religiously when I first got my cricut about a year ago. Especially the one where you shows us how to do die-cuts and kiss cut in the same cut (the one with your boba stickers!) I came upon this video and started watching your Studio vlogs randomly and I had no idea the videos were by the same person! thank you so so much for your tutorials, this has inspired me a lot! Hope you have a wonderful new year as well ^^
Hi there!!I have a small channel where I make Vlogs that you will enjoy.If u have a time,please do check it out!And we're so close to 300 subs!Thank you🥺❤️
hello hello! If you want some $$$ off your order for Online Labels, here's a coupon for ya (not an affiliate link, just a discount for you!): glnk.io/mwlx/soosanmoo here's a timestamp of the video: 00:00 - Intro 01:23 - Materials Needed 02:51 - General Tutorial 03:39 - Procreate Tutorial 10:25 - Photoshop Tutorial 20:26 - Print, Cut, and Peel 22:41- Outro
You can also you parchment paper and put tape on the parchment paper, and then on the sticker right on top of the other piece (tape on the bottom and top of the sticker, and leave space around the sticker when you cut it al the tape sticks together giving you a fully homemade sticker!)
Thank you so much for breaking down your entire process! I found it really helpful in kind of refining and streamlining my own. You mentioned that you'd be making a video on how you utilize the extra bits left over from the print and cut feature, but I can't seem to find that. I was really interested in that 'cause I hate wasting so much sticker paper each time! ; o; Again, thank you for all the videos you've made about your shop and processes! Even if you don't make a video about the scraps, I'd appreciate even just an idea.
Thank you so much for this video! It was a big help, I understood how I can edit the stickers in photoshop and then transfer them to the cricut. kisses from Portugal*
probably the best tutorial ive ever come across 👏🏼🙌🏼 been wanting to cut my own stickers and your step by step thru everything, plus your methods are just the reassurance i needed!! now i just gotta get that weather proof paper lol
Hi there!!I have a small channel where I make Vlogs that you will enjoy.If u have a time,please do check it out!And we're so close to 300 subs!Thank you🥺❤️
THANK YOU SO MUCH!! I've always wanted to make these to put on my sketchbook (because i love to decorate the cover) but never could find any aesthetic stickers and didnt have the patience to wait and order some 😂
This is so great! I'm kind of always complaining about how hard things are to do with my hands. They are getting weaker and weaker and I find there's so many things I can no longer do.... I love that you're sharing info about how to do this for us. I wish everyone would do it! Thanks 😇
i started doing this for my clients who might have some problems like arthritis, deal with some motor skills issues or be like me, I have biig hands and its hard to peel off stickers, and my hands start cramping really bad, so this was a life saver!! The stickers are so easy to peel off now 😊❤
Hi there!!I have a small channel where I make Vlogs that you will enjoy.If u have a time,please do check it out!And we're so close to 300 subs!Thank you🥺❤️
At 8.28 I was left with the stickers arranged how they looked in the frame before, they weren’t organised at six across the page, just six with four extra backings for each one how they looked before you pressed make it 😂 so I don’t know how you arranged it after that. I’ve had a frustrating day trying to print my stickers the right size and format with Cricut design space from Procreate. Now il try the next option but just thought I’d let you know the first option didn’t work well at all ❤
1. Smart Object doesn't change the quality. The usefulness of smart object is tied to the ability to swap that item out with another image or edit it across multiple projects. It's good for your logo or stuff like that. Not really needed here. 2. Align center in design space is the same as align top and align left with fewer steps. 3. This is a really cute way to make easy peel stickers. Thanks for the tutorial! I hope the info I gave helps in return!
Huge thumbs up 👍! I love your attention to detail. Thank you for sharing your process, and including the different options and programs that can be used
Hi there!!I have a small channel where I make Vlogs that you will enjoy.If u have a time,please do check it out!And we're so close to 300 subs!Thank you🥺❤️
Love this thanks for sharing and showing different options!!! Did you ever do a video on what you do with the scraps? I throw them away but if there is a use for them I’m in!!!
Hi there!!I have a small channel where I make Vlogs that you will enjoy.If u have a time,please do check it out!And we're so close to 300 subs!Thank you🥺❤️
Hi there!!I have a small channel where I make Vlogs that you will enjoy.If u have a time,please do check it out!And we're so close to 300 subs!Thank you🥺❤️
Hi there!!I have a small channel where I make Vlogs that you will enjoy.If u have a time,please do check it out!And we're so close to 300 subs!Thank you🥺❤️
So what would the pressure settings be then so it doesn’t cut through… just light? Couldn’t you probably accomplish this with only one additional cut for the outside border?
Nice! Couldn't this be done with just two passes with two different cuts? Load the sheet into the Cricut and do the die cut with higher cutting pressure. Unload then reload and do the kiss cut with the sticky note settings. If you got really creative the kiss cut would only need to be a very small cut at the pull tab.
Hi there!!I have a small channel where I make Vlogs that you will enjoy.If u have a time,please do check it out!And we're so close to 300 subs!Thank you🥺❤️
Hi thereee!!I have a small channel where I make Vlogs that you will enjoy.If u have a time,please do check it out!And we're so close to 300 subs!Thank you🥺❤️
Hi there!!I have a small channel where I make Vlogs that you will enjoy.If u have a time,please do check it out!And we're so close to 300 subs!Thank you🥺❤️
Save yourself some time before exporting the file to use in Photoshop! No need to trace the whole image and carefully stay within the lines if all you want to do is make a fill layer. Just duplicate the sticker layer in photoshop, double click and select "color overlay". Make it white, and then add your stroke.
Wait I'm a little confused on how all this came together. Why did you have to duplicate the background so many times? How does the Cricut know where to cut for the peel part?
Hi thereee!!I have a small channel where I make Vlogs that you will enjoy.If u have a time,please do check it out!And we're so close to 300 subs!Thank you🥺❤️
Hey, did you ever make that video showing what you do with the leftover sticker paper scraps? I could not find anything about it in any video after this one. THanks!!
Hello Susan! This video is sooo helpful thanks a lot! Do you draw your stickers in RGB mode? And when printing how do you adjust colors? I'm having a problem with my Epson printer and procreate/ photoshop, it doesn't print the colors as it's drawn, they are way too dark.😔 Do you try to use saturated colors or how is it works for you?)☺
I do draw in RGB mode and I havent had much issues in printing with my printer, but if I do notice colors not performing the way I want it to, I usually go into the print settings and adjust the colors there
Does procreate let setup macros to record all those steps to apply them automatically? I mean good grief my eyes are rollin' into the back of my head. Why is it so complicated to make a cut design? With Brother Scan N Cut all I have to do is 01) print to sticker paper 02) place the sticker paper anywhere on my mat 03) load the mat 04) use the scan to cut data to save things on the cutter. Or use Direct Cut to scan the material on my mat and then it cuts it afterward. 05) the cutter automatically determines the thickness of the material 06) it provides live updates to the estimated time to completion for cutting the shapes on the sticker paper. There can be different shapes and the cutter just handles it automatically.
I'm curious to know how you get everything to line up so perfectly. When I pull in two files of the same sticker design (backing and the actual stickers themselves), one is always sized much bigger and I have to by the grace of god herself, try to magically line it up and pray it all works out.
I’ve seen where ppl sell die cut stickers and laminate them. What’s the difference between not laminating and laminating? How do you word the usage for your die cut stickers?
Hellooo , loved your tutorial but just wanted to ask, does doing this process increase the rate of damaging the blade, since it's cutting the same places so many times?
Hi there!!I have a small channel where I make Vlogs that you will enjoy.If u have a time,please do check it out!And we're so close to 300 subs!Thank you🥺❤️
Easy peel stickers are great for people with accessibility needs!
I can confirm, it is way easier
You are the real MVP for this!!! I’ve been wanting to redesign all my stickers with an easy peel tab and now I know how! I have a silhouette but no matter what I do the alignment gets off about halfway down my sheet so having a way to do this with the cricut is going to be a game changer!!
Hi there!!I have a small channel where I make Vlogs that you will enjoy.If u have a time,please do check it out!And we're so close to 300 subs!Thank you🥺❤️
People like you inspire me to do artsy small business one day! Keep up the great work !!
Hi there!!I have a small channel where I make Vlogs that you will enjoy.If u have a time,please do check it out!And we're so close to 300 subs!Thank you🥺❤️
PERFECT I JUST GOT MY OWN CRICUT MACHINE AND NOW I KNOW HOW TO MAKE STICKERS THANK YOU!!!
Hi there!!I have a small channel where I make Vlogs that you will enjoy.If u have a time,please do check it out!And we're so close to 300 subs!Thank you🥺❤️
This would be so much easier on a Silhouette, because you can cut two different depths on the same file: you could make a shallower (kiss) cut for the sticker itself, and a die cut for the entire sticker.
Hoy do you do that? :0
@@4lexa I'm assuming you change the depth of the blades, one blade being deeper, one being shallower. I'm not sure what the cut settings would be for this particular sticker paper, but maybe OP knows?
@@SmittenKitten.Hi there!!I have a small channel where I make Vlogs that you will enjoy.If u have a time,please do check it out!And we're so close to 300 subs!Thank you🥺❤️
@@4lexa I did a video in November that shows how to do it in Silhouette. Definitely easier.
Silhouettes are so loud so cricut is my bae
To make an easier and faster border in procreate directly, what you can do is go to the selection tool, the one that isn’t the lazo one, and on your lineart, or layer in which you have everything, tap on the background and select invert. Then when you already have selected everything, go to a layer below everything, and with the selection still on, paint everything with white. After that turn the selection off, go to Gaussian blurr and use it as much as you want the thickness of the border to be. Then select that layer again and invert, now with a brush go over everything with white, and you should have a much cleaner, faster and easier border. Sorry if it’s confusing, hope it helps anyone!!
Hi there!!I have a small channel where I make Vlogs that you will enjoy.If u have a time,please do check it out!And we're so close to 300 subs!Thank you🥺❤️
yup! Also for people using clip studio paint, duplicate your lineart layer. Then put it to the very bottom and turn on "layer border" (you can find it in the "layer property" section) that way you have a clean border without much effort. At least that's how I usually do it
Hi Susan! I used to watch your sticker videos religiously when I first got my cricut about a year ago. Especially the one where you shows us how to do die-cuts and kiss cut in the same cut (the one with your boba stickers!) I came upon this video and started watching your Studio vlogs randomly and I had no idea the videos were by the same person! thank you so so much for your tutorials, this has inspired me a lot! Hope you have a wonderful new year as well ^^
Hi there!!I have a small channel where I make Vlogs that you will enjoy.If u have a time,please do check it out!And we're so close to 300 subs!Thank you🥺❤️
Genius. Just genius. A tab with your logo? LOVE IT! Good Job!
hello hello! If you want some $$$ off your order for Online Labels, here's a coupon for ya (not an affiliate link, just a discount for you!): glnk.io/mwlx/soosanmoo
here's a timestamp of the video:
00:00 - Intro
01:23 - Materials Needed
02:51 - General Tutorial
03:39 - Procreate Tutorial
10:25 - Photoshop Tutorial
20:26 - Print, Cut, and Peel
22:41- Outro
You can also you parchment paper and put tape on the parchment paper, and then on the sticker right on top of the other piece (tape on the bottom and top of the sticker, and leave space around the sticker when you cut it al the tape sticks together giving you a fully homemade sticker!)
Thank you so much for breaking down your entire process! I found it really helpful in kind of refining and streamlining my own. You mentioned that you'd be making a video on how you utilize the extra bits left over from the print and cut feature, but I can't seem to find that. I was really interested in that 'cause I hate wasting so much sticker paper each time! ; o; Again, thank you for all the videos you've made about your shop and processes! Even if you don't make a video about the scraps, I'd appreciate even just an idea.
Yes! Thank you for not gatekeeping! Definitely makes me want to watch more
Thank you so much for this video! It was a big help, I understood how I can edit the stickers in photoshop and then transfer them to the cricut. kisses from Portugal*
probably the best tutorial ive ever come across 👏🏼🙌🏼 been wanting to cut my own stickers and your step by step thru everything, plus your methods are just the reassurance i needed!! now i just gotta get that weather proof paper lol
Hi there!!I have a small channel where I make Vlogs that you will enjoy.If u have a time,please do check it out!And we're so close to 300 subs!Thank you🥺❤️
THANK YOU SO MUCH!! I've always wanted to make these to put on my sketchbook (because i love to decorate the cover) but never could find any aesthetic stickers and didnt have the patience to wait and order some 😂
You can make some with wax paper too
This is so great! I'm kind of always complaining about how hard things are to do with my hands. They are getting weaker and weaker and I find there's so many things I can no longer do.... I love that you're sharing info about how to do this for us. I wish everyone would do it! Thanks 😇
Omg... I feel like I watch my self, you are so cute💖
THE EDITINGGG so underrated
Thank you for going over using design space and procreate as options. 😊
i started doing this for my clients who might have some problems like arthritis, deal with some motor skills issues or be like me, I have biig hands and its hard to peel off stickers, and my hands start cramping really bad, so this was a life saver!! The stickers are so easy to peel off now 😊❤
I NEEDED THIS!!! Thank you so much, you're awesome! I'm happy to see you so excited!!
glad it helped ya!
Thank you a million times over! I have spent weeks trying to figure this out!
Would love a tutorial or walk through on how to do the prints/how to offer them!
that sounds like a great idea!
This voice is so soothing~
I’m new and I’m staying
Beautiful! Thanks for sharing. Looking forward to seeing what you use the leftover sticker paper for.
Hi there!!I have a small channel where I make Vlogs that you will enjoy.If u have a time,please do check it out!And we're so close to 300 subs!Thank you🥺❤️
Thank you for teaching us how to make an easy to peel sticker. Your stickers look awesome!
wow that's literally a genius idea
At 8.28 I was left with the stickers arranged how they looked in the frame before, they weren’t organised at six across the page, just six with four extra backings for each one how they looked before you pressed make it 😂 so I don’t know how you arranged it after that. I’ve had a frustrating day trying to print my stickers the right size and format with Cricut design space from Procreate. Now il try the next option but just thought I’d let you know the first option didn’t work well at all ❤
Omg! You're soo pretty!! 🤩🤩💖
i love your videos, they spread so much joy and love for what you are doing
HAHAHA ahhh thanks ❤
I have never seen pull tab stickers before and it’s so genius
Can you please do a tutorial on how to set up a cut file for your washi tapes? Thank you! Love your videos!
I love that u are so positive
i just clicked this video and only from the intro i love your personality!!!! you are also really pretty
1. Smart Object doesn't change the quality. The usefulness of smart object is tied to the ability to swap that item out with another image or edit it across multiple projects. It's good for your logo or stuff like that. Not really needed here.
2. Align center in design space is the same as align top and align left with fewer steps.
3. This is a really cute way to make easy peel stickers. Thanks for the tutorial! I hope the info I gave helps in return!
Awesome tutorial! Thank You! 🥰 Such a cute design too! ❤
ahh hehe thank you! ♥️
What a fantastic tutorial!!!!❤️❤️❤️ That was amazing!!! Thank you so much for the great insights and techniques. I'm hooked!☺️
Thank you so much!!! I love watching your videos! They make me happy!!
I just love your energy ♡
Love your sticker art design, so aesthetic and beautiful.💖💖💖
I immediately subscribed the moment I see the thumbnail-
Huge thumbs up 👍! I love your attention to detail. Thank you for sharing your process, and including the different options and programs that can be used
Hi there!!I have a small channel where I make Vlogs that you will enjoy.If u have a time,please do check it out!And we're so close to 300 subs!Thank you🥺❤️
Obsessed w ur channel 🌸💜
Love this thanks for sharing and showing different options!!! Did you ever do a video on what you do with the scraps? I throw them away but if there is a use for them I’m in!!!
The stickers are very aesthetic I love it! I also tried them and they are very very cute!! Also I love ur vids!❤️❤️❤️
Hi there!!I have a small channel where I make Vlogs that you will enjoy.If u have a time,please do check it out!And we're so close to 300 subs!Thank you🥺❤️
This was an incredible tutorial! Im about to try it now and im really stoked xD eeep!
I love this tab idea!! Gotta try it!
Thank you! Great video.
This is such a good tutorial! I don’t even have my printer yet lol but when i get it, i know i’ll be referring to this a lot 😊
Hi there!!I have a small channel where I make Vlogs that you will enjoy.If u have a time,please do check it out!And we're so close to 300 subs!Thank you🥺❤️
Those stickers are adorable 🤩
Hi there!!I have a small channel where I make Vlogs that you will enjoy.If u have a time,please do check it out!And we're so close to 300 subs!Thank you🥺❤️
Brillant idea !
hi! love this tutorial
question: why do you duplicate the "back" part of the sticker 3 times on cricut?
Theres no option for different pressure cuts so she has the backing be cut out with more cuts, instead of a different pressure
So what would the pressure settings be then so it doesn’t cut through… just light? Couldn’t you probably accomplish this with only one additional cut for the outside border?
Sticky note, works excellent for the kiss cut. But that's on my maker 3
Thanks for this tutorial! It was so helpful. I’m still learning Photoshop, so I get a bit flustered.
What size canvas do you use when creating the art piece before making it 300px? (During the boarder phase not the cricut full sheet) thank you!
Hi! Can someone direct me to where you show us a nice way to re-use sticker paper scraps :D
Nice! Couldn't this be done with just two passes with two different cuts? Load the sheet into the Cricut and do the die cut with higher cutting pressure. Unload then reload and do the kiss cut with the sticky note settings. If you got really creative the kiss cut would only need to be a very small cut at the pull tab.
thank you soo much and your stickers are so cute this will help me with me buisness
glad it can help you! ♥️
i love youuuu so much 💖
I found the video super helpful thank you
Coming back to say IT WORKED!!!! Thank you so much!!!
Hi there!!I have a small channel where I make Vlogs that you will enjoy.If u have a time,please do check it out!And we're so close to 300 subs!Thank you🥺❤️
You’re amazing omg
who clicked on this video bcs the thumbnail was so aesthetic 😫 ✨
Very nice tutorial!!
So aesthetic
Very cool, and creative idea. Thanks for sharing.
i just watched like 20 seconds of the video and i fell in love with ur personality!! new subscriber :D u make me really happy >\\
Hi thereee!!I have a small channel where I make Vlogs that you will enjoy.If u have a time,please do check it out!And we're so close to 300 subs!Thank you🥺❤️
This was super informative! Thank you!!!
Hi there!!I have a small channel where I make Vlogs that you will enjoy.If u have a time,please do check it out!And we're so close to 300 subs!Thank you🥺❤️
Where's the video on how to use the scrap
Save yourself some time before exporting the file to use in Photoshop! No need to trace the whole image and carefully stay within the lines if all you want to do is make a fill layer. Just duplicate the sticker layer in photoshop, double click and select "color overlay". Make it white, and then add your stroke.
Wait I'm a little confused on how all this came together. Why did you have to duplicate the background so many times? How does the Cricut know where to cut for the peel part?
Cricut has to cut twice to be able to cut through paper completely but just once for the sticker so you need more layers - one layer per cut
Thanks for this video!!!!!
I'm going to sell them in my classroom
Hi thereee!!I have a small channel where I make Vlogs that you will enjoy.If u have a time,please do check it out!And we're so close to 300 subs!Thank you🥺❤️
Can’t wait to try it. Why do you copy the bottom layer 3 times in Cricut?
Great video! 👏🏾👏🏾👏🏾
That was helpful, I should subscribe!
...
Im already subscribed :' D
Hey, did you ever make that video showing what you do with the leftover sticker paper scraps? I could not find anything about it in any video after this one. THanks!!
Hi 🙂 Why you choose 132 dpi, not 300 dpi for printing?
Thank uuu !!
“If you are using a different cutting machine, this tutorial isn’t for you.”
My cutting machine: ✂️
Hello Susan! This video is sooo helpful thanks a lot! Do you draw your stickers in RGB mode? And when printing how do you adjust colors? I'm having a problem with my Epson printer and procreate/ photoshop, it doesn't print the colors as it's drawn, they are way too dark.😔 Do you try to use saturated colors or how is it works for you?)☺
I do draw in RGB mode and I havent had much issues in printing with my printer, but if I do notice colors not performing the way I want it to, I usually go into the print settings and adjust the colors there
@@PaperuStudio Yeah i tried, but i gues im doing something wrong lol. Thanks a lot for your answer!👍💐🙏 Appreciate it😊
@@PaperuStudio CMYK is what is necessary for printing! Printers cannot get the vivid colors digital can
LOVE THIS! I would love to know how you properly clean your mats because I tried everything and nothing works😭
this is so smart! thank you so much, die-cut is awesome and everything but such a pain to remove without ruining my sticker T^T
22:21 I really wanted to know, but I see you never mentioned it
Can you briefly explain what you are doing with it?
A lot of people make washi tape!
Perfect
Does procreate let setup macros to record all those steps to apply them automatically? I mean good grief my eyes are rollin' into the back of my head. Why is it so complicated to make a cut design? With Brother Scan N Cut all I have to do is
01) print to sticker paper
02) place the sticker paper anywhere on my mat
03) load the mat
04) use the scan to cut data to save things on the cutter. Or use Direct Cut to scan the material on my mat and then it cuts it afterward.
05) the cutter automatically determines the thickness of the material
06) it provides live updates to the estimated time to completion for cutting the shapes on the sticker paper. There can be different shapes and the cutter just handles it automatically.
For people who came to check if it needs a machine, it does.
Ah, I want to save up for an iPad and an apple pencil now...it works with such beautiful ease
sorry I'm studying how to use cricut before I buy it, I do have a question on 19:53 tho. why duplicate it four times? thank you so much in advance! ♥
Hello!! I am new here!! Like your content! Now I'm interested in the story behind the scrap stickers x3
So cute stickers. Very nice.
Do you change color rgb to cmyk before do the printing ?
I'm curious to know how you get everything to line up so perfectly. When I pull in two files of the same sticker design (backing and the actual stickers themselves), one is always sized much bigger and I have to by the grace of god herself, try to magically line it up and pray it all works out.
I’ve seen where ppl sell die cut stickers and laminate them. What’s the difference between not laminating and laminating? How do you word the usage for your die cut stickers?
Love you and Thank you. Our Folks had the same taste in names. :D
Every time i take the stickers off of the adhesive, the peel tab comes off. Its it because im not adding 4 back layers?
👏👏👏 very nice
Hellooo , loved your tutorial but just wanted to ask, does doing this process increase the rate of damaging the blade, since it's cutting the same places so many times?
Hi there!!I have a small channel where I make Vlogs that you will enjoy.If u have a time,please do check it out!And we're so close to 300 subs!Thank you🥺❤️
Hi! Did you have to download the presets options? I bought a Canon printer but they don't give me more presets options to print :(
Please teach how to make our own fonts!
I don’t have a sticker machine but I have a printer and hands so we good
When my daughter tried normal stickers she would rip so immediately🤣