DONOT UPGRADE YOUR A2's FIRMWRE AFTER YOU ACTIVATE IT FOR THIS TO WORK. The latest firmware disables the hack, reason why allot of people here is saying that it did not work for them. I just got my A2 today. Activate it and skipped firmware update, followed this video. FCC unlocked (im in the Philippines CE region)
Apparently there is no update yet for Avata 2 according to DJI tech support, are you sure you updated? What fw have you guys got? Avata 2 V01.00.0200 Goggles 3 V01.00.01.00 See release notes dl.djicdn.com/downloads/DJI_Avata_2/RN/20240411/DJI_Avata_2_Release_Notes_EN.pdf
@@marcolangenberger unfortunately, If you're in a country that does not have local rules about drone transmission DJI defaults to CE mode to play it safe.
Thanks for your video. In my case I installed the hack, if the transmission is unlocked the automatic mode and I can select 5.8 or 2.4ghz.. Once on the flight field I do notice that it has a better signal but the speed does not improve, it does not go over 70km/h... and I do not notice any improvement in power either, I don't know if any parameters need to be modified but I don't know what I'm doing. mistaken. (and since I have a 5" fpv I even notice that it lacks power) Greetings
I'm from Brazil and it worked perfectly, since it was only enabled in 2.4 and after downloading the file and applying it to goggles 3, the 5.8 function was enabled. Thank you for the tip.
We can assume that because of Ukraine & Russia War, dji has announced that they will not sell their product to both coutries, and dji will prohibit it being used at the war. But they said they cannot block their products being sent to those 2 countries from neighborhood coutries, which is Europe. If I'm dji I will strongly block the FCC mode which is happening to you, but working in Asia and South America which is far from the war zone. Maybe this explains the discrepancies debated here!
Does this mean that all the ones who are saying it's not working are motion controller users? And us who is saying it's working were the dji fpv controller3?
even after the updates the hack works just as fine EVEN IN EUROPE. what i dont know is what is the best configuration to use in the transmition settings like what would be the best for better signal penetration/range? 5.8? and the bandwith? or should i just leave it on auto?
I have a question, could you please answer it for me? I already applied the file on the glasses, now what I don't know, should I put the channels in automatic mode or manual? And what bandwidth should I put? Thanku you very much
manual, you can choose 40mhz normally and leave it automatic, manual is for when flying together such as racing games. (for farther flight, select 10mhz but sacrificing the clarity of goggle screen) if 3channels of 40mhz changed to 7 channels, FCC has been applied
This hack is not working in EU anymore for Avata 2 with the final firmwares. On the other hand in EU in CE mode we have an extra band 5.1GHz which is not available in FCC.
In Ireland I only have Channel Mode Auto, no manual/channel selection possible, even with the ham file and according to DJI Tech support/release notes there is no fw update yet for Avata 2/Goggles 3 (perhaps for our region). Do you guys have a lower firmware shipped with your device then Avata 2 V01.00.0200 Goggles 3 V01.00.0100 ? CE Mode is apparently like this according to video here ruclips.net/video/uKvIkMoU7I8/видео.htmlsi=YAdXtvkHGMyas0k-&t=174
Use 20mhz in auto when flying alone, and in manual, choose any channel with good signal, when flying with others, fly 1, 3, 5, 7 with some gaps considering interference, for.more detail ask chatgpt, it explains very well ^^
Holy crap…first I have to say I am using the latest firmware for the Avata 2 . I followed your instructions, used your file, etc. - the only thing I did not do was format the SD card first. I just went out for a test flight and boy howdy, what a difference! Airspeed remained the same but distance and signal strength - through the roof! I bought this Avata 2 in Germany and have been flying in Europe the entire time in CE mode and I always wondered why I never got anywhere near the range I saw in videos on RUclips. Now I know why. I actually flew so far I got nervous when I started getting into the next town and turned around (something I could never have even considered doing until now) and I never lost a single bar (signal and HD). My questions now are these - if this is because of the goggles, does this mean I can fly any drone compatible with goggles 3 ( mini 4 pro in particular - which I have my eye on) in FCC mode if I am using the goggles? Also - how do I do the same with a mini 3 ( not mini 3 pro - just the mini 3)? Thanks for the hack and the info - really!
exactly, if you see me flying BETAFPV'S PAVO20 series(ad dji O3 air unit is inserted to pavo20 drone) which I use Same goggle3, I don't have to do anything as FCC is already applied, next week I'm going to upload long range city flight of pavo20, and u will be astonished by its flight! ^^
@@Marino002 I use the motion controller that came with the fly more package. I don’t own the controller for manual mode and don’t plan on getting one anytime soon. I was a pilot long before I flew drones recreationally and I guess the motion controller is more of a stick and rudder feeling for me. Its like on my mini 3 - I just can’t get used to the left stick configuration of stick up = climb and vice versa - I think im just going to reverse the input on the left stick to stick up = down, like in real aircraft when you pull back (down) on the stick the nose goes up and you climb. Stick forward (up) / nose down (descent) just makes more sense muscle memory wise. I wonder if anyone else feels like that…
I'm not sure with mini3 as I don't have it but once the goggle if fcc mode it should be fcc mode as I'm using other dji o3 air unit embedded fpvs and they fly just so far. check my other videos flying inside the cities..you will be astonished
As recommended plz format from your goggle and insert it again and reboot, nothing seems different but fly from the same spot and check the signal difference as many here in Korea says there's significant difference in the flight distance and antenna signal
@@irhuz8683 format the SD card in your windows pc before putting the file on it. beware this will make you lose all the content on your sd card, so be sure to back up. Once you put the file on de SD card, insert it and it will work
I did exactly what you said. Both are visible in manual mode. 5.8 and 2.4. So how do I understand that it is FCC? I was already seeing 5.8 and 2.4 in manual mode without doing any of this?
@@YOONGOON_FPV i appreciate that bro! Thanks! Im gonna buy one! By the way? The fcc hack for the avata 1 is the same as this one right? I do have the avata 1. 😭
@@YOONGOON_FPV damn! Thanks man! Im excited! To be honest the only thing that i didnt like about my avata is the range and i think this will help!!! Thank you in advancee xD
Hi Yoongoon, will this hack work when flying in normal mode as Im pretty new to Avata 2, I haven't went into manual mode for flying yet but my range is very poor even after installing the hack, I do have all the channels so it must be installed ! correctly
OK that means it's now FCC mode, then it works on normal(sports) and manual both, try to fly at open field instead of behind the trees and braches, were you flying behind obstacles?
@@YOONGOON_FPV ya, I was flying behind obstacles and I would see the signal going orange and then red so I would increase my height and it would be ok them 👍
My drone cant even fly to the other side of my house before losing complete signal. Even when its right next to me the signal is like 5 mbps. Whats up with that?! This happened after i did a update on all my avata stuff after not flying it for 6 months
but plz note that drone is similar to kites...going behind is losing your kite lines.. if it's a city or valleys with other many walls to reflect signal then it's occasionally possible to go behind something but if it's open filed and nothing then it's like that..check my community tab where I sketched this logic in diagram
ch is for when flying together. if there are 4 pilots we first put in Same mHz such as 40mhz, and we gives some gaps.. 1ch, 3ch, 5ch, 7ch...instead of 1,2,3,4 as signal can be interfered
Hi ! i tried it, but the setting for "channel mode" is set to "Auto" and is grayed, i can't put it on manual... any idea ? i applied the update on the Avata 2 so it should be good :/
@@YOONGOON_FPV France here, I saw an article talking about the fcc hack on Avata 2, the guy said it worked on only 1 of 4 Goggles v3, he doesn’t know why, on the 3 other the « channel mode » was grayed and locked in auto
아바타1과 적용방법이 완전히 똑같습니다. 심지어 그때 그 같은 파일이며, 똑같은 경로에 넣으시면 됩니다. 고글메모리 포맷을 고글에서 한번 해주시고, 해당 설명글의 링크에서 다운받아, 압축풀어서 넣어주세요, 단, 예전에는 전송-수동에 가보면 1개였던 채널이 7개씩 늘어나곤 했잖아요? 근데 아바타는 FCC를 안해도 채널이 여러개 있어서 적용여부는 알 방법이 없다는 것! 하지만 비행 실험해본결과 현저한 비행거리(신호)차이가 있다고 실험해보신 분들이 말합니다! 적용방법은 바라던드론님의 영상을 참고하세요 20Mhz, 40Mhz의 차이는 챗GPT에게 물어보면 잘 설명해줍니다
Regarding the European replies under thus article shows that this method won't work for Europe, so sad, so.korean pilots uploaded 5km go and 5km come (round trip) test with avata2
Haha lucky you!, FCC is frequency regulation of USA, this means it is already in your avata! when dji says it flies 13km with avata2, in other CE regulation it can fly below 1~2km in same condition!
@@YOONGOON_FPVI am referring to avata 2 , if I don’t update the firmware to the latest one after activating the drone and apply your trick, it should work just fine right ?
Hmm as written in other replies, it seems dji has blocked in EU countries where close to the Ukraine and Russia, where drones can bought and sent easily to the war which dji is strictly prohibiting
So sad;; anyway I'm making comparison video with avata1 and 2 which flew more than 2km at the mountain, it's seems it's working for sure as it will fly only few hundred meters..
We can assume that because of Ukraine & Russia War, dji has announced that they will not sell their product to both coutries, and dji will prohibit it being used at the war. But they said they cannot block their products being sent to those 2 countries from neighborhood coutries, which is Europe. If I'm dji I will strongly block the FCC mode which is happening to you, but working in Asia and South America which is far from the war zone. Maybe this explains the discrepancies debated here!
To all, it's seems that this isn't working in Europe, which is adjacent to Ukraine & Russia, but working at Asia and South America, What do you think this means? I heard dji has blocked their product being sold at both countries as they prohibited their product to be used at war. But they also said, but they can't stop their product being sent to the war after it is sold (which is near to those countries, and that is "Europe") I guess this is why Europe can't apply this method!
This hack is not working in EU anymore for Avata 2 with the final firmwares. On the other hand in EU in CE mode we have an extra band 5.1GHz which is not available in FCC.
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
DONOT UPGRADE YOUR A2's FIRMWRE AFTER YOU ACTIVATE IT FOR THIS TO WORK. The latest firmware disables the hack, reason why allot of people here is saying that it did not work for them. I just got my A2 today. Activate it and skipped firmware update, followed this video. FCC unlocked (im in the Philippines CE region)
how is philippines CE region? i thought CE region is only europe?
Somewhere who use mm,m,km instead of inch, mile, mostly use CE(not all)
Exactly, I didn't update yet, phew!
Apparently there is no update yet for Avata 2 according to DJI tech support, are you sure you updated? What fw have you guys got?
Avata 2 V01.00.0200
Goggles 3 V01.00.01.00
See release notes dl.djicdn.com/downloads/DJI_Avata_2/RN/20240411/DJI_Avata_2_Release_Notes_EN.pdf
@@marcolangenberger unfortunately, If you're in a country that does not have local rules about drone transmission DJI defaults to CE mode to play it safe.
Tnx for video, bro! File works with latest firmware 1.003 checked today. With 5.8 range much better
good to hear !
Thanks for your video. In my case I installed the hack, if the transmission is unlocked the automatic mode and I can select 5.8 or 2.4ghz..
Once on the flight field I do notice that it has a better signal but the speed does not improve, it does not go over 70km/h... and I do not notice any improvement in power either, I don't know if any parameters need to be modified but I don't know what I'm doing. mistaken. (and since I have a 5" fpv I even notice that it lacks power)
Greetings
I'm from Brazil and it worked perfectly, since it was only enabled in 2.4 and after downloading the file and applying it to goggles 3, the 5.8 function was enabled. Thank you for the tip.
Many were saying that I was lying but this reply proves that I was saying the right thing!
this was removed by DJI after the last public update, those mother fuckers
We can assume that because of Ukraine & Russia War, dji has announced that they will not sell their product to both coutries, and dji will prohibit it being used at the war. But they said they cannot block their products being sent to those 2 countries from neighborhood coutries, which is Europe. If I'm dji I will strongly block the FCC mode which is happening to you, but working in Asia and South America which is far from the war zone. Maybe this explains the discrepancies debated here!
@@YOONGOON_FPV apparently the FCC is only released automatically with the DJI FPV Controller 3.
Does this mean that all the ones who are saying it's not working are motion controller users? And us who is saying it's working were the dji fpv controller3?
even after the updates the hack works just as fine EVEN IN EUROPE. what i dont know is what is the best configuration to use in the transmition settings like what would be the best for better signal penetration/range? 5.8? and the bandwith? or should i just leave it on auto?
10mhz shows the most long range :)
u can ask chatgpt for more details, it knows well ^^
do you think its a way to catch me using FCC in eu ? @@YOONGOON_FPV
@@YOONGOON_FPV
If i choose auto after fcc hack is it better than choose specific channel like 40hz,20hz or 10hz?any d8fferent?
if u ask chatgpt it tells very specifically about this
once you know it is in fcc mode by hacking 7 channels in 20mhz, do you put it in auto again during your flight or how do you get the best signal?
yes in auto but if we fly together with others then we put in manual, 1/3/5/7 channel giving some gaps in channel frequency ask chat get.for.this
เป็นข้อมูลที่ดีมาก ขอบคุณที่แบ่งปัน ❤
I have a question, could you please answer it for me?
I already applied the file on the glasses, now what I don't know, should I put the channels in automatic mode or manual? And what bandwidth should I put?
Thanku you very much
manual, you can choose 40mhz normally and leave it automatic, manual is for when flying together such as racing games. (for farther flight, select 10mhz but sacrificing the clarity of goggle screen) if 3channels of 40mhz changed to 7 channels, FCC has been applied
ask chatgpt for further more, it knows really well
activated avata2 yesterday and updated the firmware. I tried both hamcfg and dronetweaks. the drone doesn't go to fcc...
R u in Europe?
@@YOONGOON_FPV yes
I am about to buy A2 in india will this gonna work ?
I'm from Brazil and this hack worked perfectly! Thank you
bom dia Ze, vc sera que com firmware atualizado, funciona?
@@Mjj49 estou com firmware atualizado, instalei e tá funcionando normalmente. Abre os 3 canais.
Where is the file bro... i wan download
? there's the link below the written instructions under the vid
How about using the Drone Tweaks method?
Didn't try to used that method yet~can u try?
This hack is not working in EU anymore for Avata 2 with the final firmwares. On the other hand in EU in CE mode we have an extra band 5.1GHz which is not available in FCC.
in Korea we have 2.4G and 5.8G only, same in Brazil,
do you have 5.8G?
@@YOONGOON_FPV Yes, we have also 5.8GHz and accordingly to Avata 2 specs:
Transmitter Power (EIRP)
2.4 GHz:
＜33 dBm (FCC)
＜20 dBm (CE/SRRC/MIC)
5.1 GHz:
< 23 dBm (CE)
5.8 GHz:
＜33 dBm (FCC)
＜30 dBm (SRRC)
< 14 dBm (CE)
In Ireland I only have Channel Mode Auto, no manual/channel selection possible, even with the ham file and according to DJI Tech support/release notes there is no fw update yet for Avata 2/Goggles 3 (perhaps for our region). Do you guys have a lower firmware shipped with your device then Avata 2 V01.00.0200 Goggles 3 V01.00.0100 ?
CE Mode is apparently like this according to video here ruclips.net/video/uKvIkMoU7I8/видео.htmlsi=YAdXtvkHGMyas0k-&t=174
the hack is still working try doing it again
Hi Yoongoon，May I ask after I apply with channel I have to choose?
Use 20mhz in auto when flying alone, and in manual, choose any channel with good signal, when flying with others, fly 1, 3, 5, 7 with some gaps considering interference, for.more detail ask chatgpt, it explains very well ^^
What mean flt with other？😅
If you race fpv with others then 4 will fly at same time, that's when u adjust Channels
Greetings from Peru! The hack worked fine even after the latest update.
so good to hear.this, what is the difference? does it fly further? or do u see more channels?
@@YOONGOON_FPV yes! i have more channels, i don’t know if it flies further just yet. Thank you for the hack!
aha ^^ anyway mine flew around 2km, and my other Korean friend flew 5km!
@@YOONGOON_FPV wow! Was it on an urban area or in a clear landscape with low interference?
@camprey ruclips.net/video/mSaDWxR6DfA/видео.htmlsi=hOp0lWdNgl65JezO watch this :)
Holy crap…first I have to say I am using the latest firmware for the Avata 2 . I followed your instructions, used your file, etc. - the only thing I did not do was format the SD card first. I just went out for a test flight and boy howdy, what a difference! Airspeed remained the same but distance and signal strength - through the roof! I bought this Avata 2 in Germany and have been flying in Europe the entire time in CE mode and I always wondered why I never got anywhere near the range I saw in videos on RUclips. Now I know why. I actually flew so far I got nervous when I started getting into the next town and turned around (something I could never have even considered doing until now) and I never lost a single bar (signal and HD). My questions now are these - if this is because of the goggles, does this mean I can fly any drone compatible with goggles 3 ( mini 4 pro in particular - which I have my eye on) in FCC mode if I am using the goggles? Also - how do I do the same with a mini 3 ( not mini 3 pro - just the mini 3)? Thanks for the hack and the info - really!
Do you use the Motion controller or the controller 3??
I use controller3 and 2
exactly, if you see me flying BETAFPV'S PAVO20 series(ad dji O3 air unit is inserted to pavo20 drone) which I use Same goggle3, I don't have to do anything as FCC is already applied, next week I'm going to upload long range city flight of pavo20, and u will be astonished by its flight! ^^
@@Marino002 I use the motion controller that came with the fly more package. I don’t own the controller for manual mode and don’t plan on getting one anytime soon. I was a pilot long before I flew drones recreationally and I guess the motion controller is more of a stick and rudder feeling for me. Its like on my mini 3 - I just can’t get used to the left stick configuration of stick up = climb and vice versa - I think im just going to reverse the input on the left stick to stick up = down, like in real aircraft when you pull back (down) on the stick the nose goes up and you climb. Stick forward (up) / nose down (descent) just makes more sense muscle memory wise. I wonder if anyone else feels like that…
I'm not sure with mini3 as I don't have it but once the goggle if fcc mode it should be fcc mode as I'm using other dji o3 air unit embedded fpvs and they fly just so far. check my other videos flying inside the cities..you will be astonished
Hello “YOONGOON”! Thank you for showing me such a wonderful video! I feel so happy! I look forward to your next work! Have a nice day!
Hope this worked for you!
after active fcc can I use the auto? or need to use the manual?
both !
Can i use the same memory card and file as i used in Goggles 2? Or do i have to format the memory card and copy the file again?
As recommended plz format from your goggle and insert it again and reboot, nothing seems different but fly from the same spot and check the signal difference as many here in Korea says there's significant difference in the flight distance and antenna signal
I don't get it. Format the SD card or reset the Goggles?
Why do we need to format the SD card?
@@irhuz8683 format the SD card in your windows pc before putting the file on it. beware this will make you lose all the content on your sd card, so be sure to back up. Once you put the file on de SD card, insert it and it will work
What does this do for the Avata?
It significantly make your drone fly further with better signal, based on American FCC law regulations, it's much weaker in other countries
thanks. Works great
I did exactly what you said. Both are visible in manual mode. 5.8 and 2.4. So how do I understand that it is FCC? I was already seeing 5.8 and 2.4 in manual mode without doing any of this?
3 channels expand to 7channels at 20mhz
@@YOONGOON_FPV Isn't it 2.4 GHz, master? Or is it 5.8 GHz?
@@YOONGOON_FPV 5.8 ghz now 20 mhz in 7 channels? is it done?
@@ademlegoklere ademcim 5.8 seçip auto yap
@@feiht5487 teşekkürler üstat kimse bilmiyor bu işleri doğru dürüst
Do i really need an sd card? Or i can just manually add it to the googles?
only sd card can do this for you
@@YOONGOON_FPV i appreciate that bro! Thanks! Im gonna buy one! By the way? The fcc hack for the avata 1 is the same as this one right? I do have the avata 1. 😭
yes they are same and this hacks the goggle, which means it's also possible at dji neo, I will upload dji Leo's extreme flight soon!
@@YOONGOON_FPV damn! Thanks man! Im excited! To be honest the only thing that i didnt like about my avata is the range and i think this will help!!! Thank you in advancee xD
@@YOONGOON_FPVdoes the hack still work?
Does the garanti still work with dji care sir ?
Yes, this is not hacking, but dji letting to happen
Hi Yoongoon, will this hack work when flying in normal mode as Im pretty new to Avata 2, I haven't went into manual mode for flying yet but my range is very poor even after installing the hack, I do have all the channels so it must be installed ! correctly
are there 7 channels in 20mhz? how many channels do u see?
@@YOONGOON_FPV yes I can see 7 channels in 20 mhz
OK that means it's now FCC mode, then it works on normal(sports) and manual both, try to fly at open field instead of behind the trees and braches, were you flying behind obstacles?
@@YOONGOON_FPV ya, I was flying behind obstacles and I would see the signal going orange and then red so I would increase my height and it would be ok them 👍
My drone cant even fly to the other side of my house before losing complete signal. Even when its right next to me the signal is like 5 mbps. Whats up with that?! This happened after i did a update on all my avata stuff after not flying it for 6 months
but plz note that drone is similar to kites...going behind is losing your kite lines.. if it's a city or valleys with other many walls to reflect signal then it's occasionally possible to go behind something but if it's open filed and nothing then it's like that..check my community tab where I sketched this logic in diagram
@YOONGOON_FPV I see. Makes sense, although before I was able to fly behind houses just fine. Now I can't.
did u buy anything that can interfere signals in your house? any changes?
Does this make the CE drone go faster than 70km/h?
Actually my avata2 flew 90km/h
@@YOONGOON_FPV In Europe it's limited to 69-70 km/h. So disappointing. It has less power, less fun.
Yesterday I flew with 90km/h in 45degrees, still felt it was slow!
seems not to work on my european avata 2, goggles 3
Have u tested before & after in same location?
@@YOONGOON_FPV before and after what? Excuse me, I do not understand 😅
@yoonserk yes I did. Didn't work. Range is the same.
@@irhuz8683 r u in Europe?
@@YOONGOON_FPV no
How do we know what ch to use?
ch is for when flying together. if there are 4 pilots we first put in Same mHz such as 40mhz, and we gives some gaps.. 1ch, 3ch, 5ch, 7ch...instead of 1,2,3,4 as signal can be interfered
cool I gonna try it!
But i don´t know if my avata 2 firmware was update...
Is it possible to back to the firmware´original?
Greatings from Brazil!
Well it worked! My firmware is the first! 🎉 but apeeared just 3 channel, why?Should i Keep automátic or manual?
Automatic is good, but if you see too much orange or red signal, do manual...even when u fly with your friends
As I know.it's not possible
Hi ! i tried it, but the setting for "channel mode" is set to "Auto" and is grayed, i can't put it on manual... any idea ? i applied the update on the Avata 2 so it should be good :/
Same here
Hmm what country are u at? Here it's Korea
@@YOONGOON_FPV France here, I saw an article talking about the fcc hack on Avata 2, the guy said it worked on only 1 of 4 Goggles v3, he doesn’t know why, on the 3 other the « channel mode » was grayed and locked in auto
I heard that European drone law got really strict recently right?
@@YOONGOON_FPV that’s why I want FCC 😅 it works for some, and not for others, so it is weird, a solution will be found I think
제가 대략적으로 하는 방법은 알아들었는데 실수 할 것 같아서 한국어로 올려주시면 안될까요? 좀 곤란하실까요?
아바타1과 적용방법이 완전히 똑같습니다. 심지어 그때 그 같은 파일이며, 똑같은 경로에 넣으시면 됩니다. 고글메모리 포맷을 고글에서 한번 해주시고, 해당 설명글의 링크에서 다운받아, 압축풀어서 넣어주세요,
단, 예전에는 전송-수동에 가보면 1개였던 채널이 7개씩 늘어나곤 했잖아요?
근데 아바타는 FCC를 안해도 채널이 여러개 있어서 적용여부는 알 방법이 없다는 것!
하지만 비행 실험해본결과 현저한 비행거리(신호)차이가 있다고 실험해보신 분들이 말합니다!
적용방법은 바라던드론님의 영상을 참고하세요
20Mhz, 40Mhz의 차이는 챗GPT에게 물어보면 잘 설명해줍니다
im in europe and hack doesnt work :( and my avata2 flight range is shit, 300meters and signal lost
Regarding the European replies under thus article shows that this method won't work for Europe, so sad, so.korean pilots uploaded 5km go and 5km come (round trip) test with avata2
I will try, nice video
You are welcome
Does it work in the USA
Haha lucky you!, FCC is frequency regulation of USA, this means it is already in your avata! when dji says it flies 13km with avata2, in other CE regulation it can fly below 1~2km in same condition!
the avata 2 menu doesnt show any chanells its shows auto
Strange, so many channels and manual were shown even before FCC hacking
@@YOONGOON_FPV well i tested my avata 2 and it flys 1km and max speed what i got in sport mode was 57km/h not a lot
90km/h In 45degrees here in korea
@vilnisphoto in manual, did u try over 50degrees for.camera angle??
@@YOONGOON_FPV i dont have manual i got auto and it doesnt open manual,and i got stick remote not other
Does the FCC hack work on latest firmware ? nice video btw
I think it does
Does this hack apply with motion controller sir?
this hacks the goggle, and your cons are connected to the goggle
I am about to buy A2 will this trick gonna work in India ? 🇮🇳
if you had a1 then it will be same, how was a1 in India?
@@YOONGOON_FPVI am referring to avata 2 , if I don’t update the firmware to the latest one after activating the drone and apply your trick, it should work just fine right ?
NOT working in FRANCE CE
Hmm so sad;;
Smart 😊
Gracias YOONGOON estoy en colombia y funcion perfectamente
Hope this helps u!
오우 유창한 언어구사 good
Did not work ın Türkiye
Hmm as written in other replies, it seems dji has blocked in EU countries where close to the Ukraine and Russia, where drones can bought and sent easily to the war which dji is strictly prohibiting
Thnank You
You are welcome, i can see the tests of others and they fly 5km far in round trips!
한국어로도 설명 한번만 더 부탁드리겠습니다...
별거 없이 그냥 링크 다운받아서 고글 메모리카드에 넣고 꽂아 주시면.되요. 끝
Thank u brother
Hope this work in your country! What's your nationality?
@@YOONGOON_FPV I'm from Indonesia, your tutorial works well.
is there a tutorial also for fcc for RC 2 / Mavic Air 3?
Don't know about mavic ^^; someone says if you update the recent firmware the FCC doesn't work, so I'm not updating, what about you?
@@YOONGOON_FPV ok thanks brother, I don't know for fcc mavic either :D
Avata 2 bisa bro fcc nya ? Firmware brp bro avata 2 nya ??
in Europe doesn't work. good job!!!
So sad;; anyway I'm making comparison video with avata1 and 2 which flew more than 2km at the mountain, it's seems it's working for sure as it will fly only few hundred meters..
We can assume that because of Ukraine & Russia War, dji has announced that they will not sell their product to both coutries, and dji will prohibit it being used at the war. But they said they cannot block their products being sent to those 2 countries from neighborhood coutries, which is Europe. If I'm dji I will strongly block the FCC mode which is happening to you, but working in Asia and South America which is far from the war zone. Maybe this explains the discrepancies debated here!
To all, it's seems that this isn't working in Europe, which is adjacent to Ukraine & Russia, but working at Asia and South America, What do you think this means? I heard dji has blocked their product being sold at both countries as they prohibited their product to be used at war. But they also said, but they can't stop their product being sent to the war after it is sold (which is near to those countries, and that is "Europe") I guess this is why Europe can't apply this method!
좋은 정보 감사합니다. 이거 어떻게 하는 건가요.ㅜ
? 영상 따라하시면 될듯요
Я Россия! и мне помогло! Все заработало - и работает со штурвалом бананом который одной рукой брать, я не обновляла свою авату-2
good to hear that it helped!
Ты врушка!
저는 자막을 켯어요 ㅋㅋㅋㅋㅋㅋ
Это текстовый файл пустой?
almost? but if you add it it works
@@YOONGOON_FPV надеюсь, что вы правы
actually it's not text file, which enables fcc
@@YOONGOON_FPV да, я думаю, что это команда
This hack is not working in EU anymore for Avata 2 with the final firmwares. On the other hand in EU in CE mode we have an extra band 5.1GHz which is not available in FCC.
I heard that this is happening to those who updated this week;;
can delete last update again?