Try drilling the boss and bolting it to a block of hardwood to hold in the vise. Those blades are delicate and an overpressure can result in damage to the grain you might not be aware of. Excellent work!
Have a good day, hello, you are amazing, you are wonderful, you are a creative artist. I ask you for more creativity. Show us other works and creativity. I wish you good luck and lasting success.❤❤❤👍👍👍
SIr, Your manual sketching measuring , cuttinng , fishining all fine well planned . but this need all those tools to make at home we dont get it. what type wood its any name for that texture?
I carved apple O20 Cox props. They didn't come out as nice as yours. Now I have an O 200A, and a 73 inch propeller is supposed to be laminated. You can't carve a stack of them in a weekend. At least it won't be free flight. It should last longer. Culver makes biggie props. Take a bow.
Very beautiful job. It would be nice if maybe each quadrant was coloured , or had floating reference points edited in as an overlay, so left / right, upper / lower, LE / TE distinctions were more easily understood. It got to be a bit of a blur initially. Think I will have to buy Peck props for now. I don't have a spatial brain. Oh well.
Excellent travail mon professeur, j'ai beaucoup d'intérêt à vous suivre pour plus de connaissances dans l'aéronautique. J'aimerais votre WhatsApp s'il vous plaît merci.
@@arjunflykitesharma1376 I don't have any idea about the exact weight of the gliders but all i know is, it should be as light as possible so it can glide perfectly in flight.
Amazing.. Excellent workmanship..Thanks for sharing your valuable knowledge..
Try drilling the boss and bolting it to a block of hardwood to hold in the vise. Those blades are delicate and an overpressure can result in damage to the grain you might not be aware of.
Excellent work!
Have a good day, hello, you are amazing, you are wonderful, you are a creative artist. I ask you for more creativity. Show us other works and creativity. I wish you good luck and lasting success.❤❤❤👍👍👍
nice workmanship...which wood did you make it from?
Ganda boss.. Papagawa ako sayo boss pag uwi ko ha... Thanks
Que incrível! Parabéns pelo seu talento e dedicação. Eu vou fazer uma hélice também. Gratidão 🤗🌟🎉💖.
Very nice propellers
Work of art, awesome!!
Very nice work, thank you very much!
Молодец руки на месте и с головой дружат.яб купил
SIr, Your manual sketching measuring , cuttinng , fishining all fine well planned . but this need all those tools to make at home we dont get it. what type wood its any name for that texture?
NIIIICE 👌
Très bien fait
Perfect 👌🏻👏🏻👏🏻👏🏻
Tremendous work Erwin. Can I commission a propeller from you? I'll provide the stock.
Thanks for sharing informative video
Thanks for watching
Thnk good job
I carved apple O20 Cox props. They didn't come out as nice as yours. Now I have an O 200A, and a 73 inch propeller is supposed to be laminated. You can't carve a stack of them in a weekend. At least it won't be free flight. It should last longer. Culver makes biggie props. Take a bow.
Good work
Very nice...
Beautiful.
Terimakasih ilmunya, salam sukses.
nice keep it up
What’s the measurements for the plane wing ?
nice
Lokasi anda tinggal dimana bro,,,???
Very beautiful job.
It would be nice if maybe each quadrant was coloured , or had floating reference points edited in as an overlay, so left / right, upper / lower, LE / TE distinctions were more easily understood. It got to be a bit of a blur initially. Think I will have to buy Peck props for now. I don't have a spatial brain. Oh well.
Difficult!! On what basis your pensil was marking lines i couldn't understand
thank you lot's
galing sir :) tsaga mong nag liha :D
3 days yan hahaha
@@erwinavenido7945 lambat dana AHAHAHA pero sulit maganda :) bilhin ko sir pang display :D
@@serchris29 ahaha.. ayaw.. pang demo ko to,, gawa ka nlng haha
sensenich design ito
@@erwinavenido7945 sir pagawa nalang kami hahahh wlang mga tools equipments kami
@@reythecyclist8629 cge basta tama pag kagawa
Elaborate from which prospective it will roate either clockwise or anti clockwise ?
No.
Common leftie. Pusher or tractor.
Amigo parabéns eu quero tentar faser uma 16x8 vc não poderia por favor manda um projeto dela em pdf para a gente tentar faser obrigado
Good
Faz uma hélice para mim coloca meu avião
galing
Will it rotate clockwise or counterclock wise plz tell ??
Any sir, It doesn't matter as long as you pivot the middle part.
But if your done already, the propeller face should be facing you and the rotation is counterclockwise towards the leading edge. Feel free to ask sir
Nice
That's very hard. ㅠㅡㅠ
Comment faire le dimensionnement l'hélice
Monobloc ?? Pourquoi ne pas avoir prit de lamellé-collé ??
Bonjour Mr svp les mesures en mettre
Sir ilan yung kapal ng hub assembly sa side sir?
3/4 to 1 inch..
Maiden flight... Crash and propeller broke... ITS hurt
What type of wood you are using ?
For instructional purposes only and easy working I used palochina wood... Thanks for watching
Excellent travail mon professeur, j'ai beaucoup d'intérêt à vous suivre pour plus de connaissances dans l'aéronautique.
J'aimerais votre WhatsApp s'il vous plaît merci.
I prefer to build with Woodglut plans.
Ande encontro no a ele de avião par compra ok
How to make the pattern?
👍🙏❤️
What is the weight of sir glider? kg
What is the weight of sir glider? kg
@@arjunflykitesharma1376 I don't have any idea about the exact weight of the gliders but all i know is, it should be as light as possible so it can glide perfectly in flight.
aviation course mo no? HAHA
WARNING: the audio may not be suitable for all audiences.
B
Boss Ano contact number mo....
for what purpose po sir?
Papagawa ako NG wooden propeller sayo...