Well sir I still wanna thank you for showing me how to assemble my pressure washer. I hope mines last and works.. you showed me step by step.. I appreciate you any ways stay safe 😷if u read this a year later lol!
The only difficulty I ran into with the assemble was connecting the spray wand to the trigger handle. You have to push REALLY HARD to connect the 2 pieces when threading them together. Be careful to avoid accidental cross threading which can cause the wand to leak during use.
I had the same problem with the pressure going low repeatedly until I learned that it stopped loosing pressure when I walked away from it with the hose extended. Don't have the washer close to what you're cleaning and you won't have that pressure issue.
Clearly has no common sense, you have to make sure there is no air in the line before you turn the motor on or it burns it out. Second you need to plug it directly into a breaker. And third, he wanted this power washer to fail from the beginning. He tried to make a REMOVABLE soap container PERMANENT. Just because it didn’t fit his needs he is bashing the product. I’ve had it for 3 years and I love it. Also the hose reel is fine, don’t know why he made it a big deal.
I am not crazy about the hose reel, i am just not going to use it. This guy cleans decks daily, he clearly needs a better pressure washer than a $200 one.
The issue is that you have it connected to an extension cord I had the same issue till I hooked it up straight to the wall outlet and it works great very happy with my purchase mine came with the surface cleaner as well for 200 at home depot
Jose Garcia ...can’t wait to use mine. However I wasn’t sure how to connect the tube to the reel without kinking it. Any suggestions? Do you also suggest the quick release coupler he was suggesting?
I noticed you had the power hooked up to an extension cord. It specifically said not to use with an extension cord. Therefore maybe the low power and tripped circuit
It clearly states in the manual that an extension cord is not recommended. However, " if using an extension cord arrange a drip loop to avoid the possibility of the tool plug getting wet." The manual also says not to used an extension cord that exceeds 25 ft.
Just Hooked mine up but used the hose that came with it … it tries to prime itself like you said but no pressure whatsoever. I even stood there for 10 minutes holding the trigger to see if it’ll pick up and nope nothing. Took apart the hose connections and reconnected yet still it fails. This was my experience with this pressure washer, not so great.
The hose reel really stinks. I am watching this video to see what I was missing because i couldn't get the hose to reel. I bought this specifically because of that reel.
I just came here to see if I was the only person that had the same issue of constantly losing pressure. I'm glad I skipped over 20mins worth didn't know he was just gonna clean he's garbage bin lol.
That friggin hose made no sense to me. The last power washer I bought, the one end of the hose stayed connected to the machine. The instructions for this one were unclear and I spent well over a half hour trying to figure out what I was doing wrong. I watched your video and was like “JFC...now I know why it was making no sense. I may just return this. I only bought it because it had a 15 inch surface cleaner and I bought the telescoping power washer pole to go with the wand, because I have very high windows that need power washed desperately. The telescoping pole has a brush and soap etc. I’ve not seen them on the other power washers. I may try it out once and see how it works and if I experience the same problems you had, I definitely will be returning it. Thanks so much for taking the time to do this video...it was very helpful!
Well sir I still wanna thank you for showing me how to assemble my pressure washer. I hope mines last and works.. you showed me step by step.. I appreciate you any ways stay safe 😷if u read this a year later lol!
The only difficulty I ran into with the assemble was connecting the spray wand to the trigger handle. You have to push REALLY HARD to connect the 2 pieces when threading them together. Be careful to avoid accidental cross threading which can cause the wand to leak during use.
I had the same problem with the pressure going low repeatedly until I learned that it stopped loosing pressure when I walked away from it with the hose extended. Don't have the washer close to what you're cleaning and you won't have that pressure issue.
Clearly has no common sense, you have to make sure there is no air in the line before you turn the motor on or it burns it out. Second you need to plug it directly into a breaker. And third, he wanted this power washer to fail from the beginning. He tried to make a REMOVABLE soap container PERMANENT. Just because it didn’t fit his needs he is bashing the product. I’ve had it for 3 years and I love it. Also the hose reel is fine, don’t know why he made it a big deal.
I am not crazy about the hose reel, i am just not going to use it. This guy cleans decks daily, he clearly needs a better pressure washer than a $200 one.
The issue is that you have it connected to an extension cord I had the same issue till I hooked it up straight to the wall outlet and it works great very happy with my purchase mine came with the surface cleaner as well for 200 at home depot
Jose Garcia ...can’t wait to use mine. However I wasn’t sure how to connect the tube to the reel without kinking it. Any suggestions? Do you also suggest the quick release coupler he was suggesting?
I noticed you had the power hooked up to an extension cord. It specifically said not to use with an extension cord. Therefore maybe the low power and tripped circuit
If you have a long driveway how can you use it without a orange extension cord?
It clearly states in the manual that an extension cord is not recommended. However, " if using an extension cord arrange a drip loop to avoid the possibility of the tool plug getting wet." The manual also says not to used an extension cord that exceeds 25 ft.
Just Hooked mine up but used the hose that came with it … it tries to prime itself like you said but no pressure whatsoever. I even stood there for 10 minutes holding the trigger to see if it’ll pick up and nope nothing. Took apart the hose connections and reconnected yet still it fails. This was my experience with this pressure washer, not so great.
Did you turn the water on and pull the trigger before turning on the washer to get the air out of the line first?
I like your idea about adding a quick connect at both ends. Anyone should be able to add this as an after market option. Right?
The hose reel really stinks. I am watching this video to see what I was missing because i couldn't get the hose to reel. I bought this specifically because of that reel.
I've had mine for about an hour now and love it
Do you have a pressure rugulator on your house? If you took that off it might work better
I am watching some Dude wash his garbage bin.
Thank you COVID.
HAHAHAHAHAHAHAHAHA
Lmfao I skipped like 20mins into it.
Very informative. Nice knife! What is it?
Thank you! I used ur tutorial!
U didn't purge the air bubbles 🤣
I just came here to see if I was the only person that had the same issue of constantly losing pressure. I'm glad I skipped over 20mins worth didn't know he was just gonna clean he's garbage bin lol.
I too bought one and had the same exact issues at putting it together. This is the first Ryobi product that I didn't like.
GREAT VIDEO MY MAN, EASY ASSEMBLE!!!......
Took me forever to put that damm hose on the reel.
I'm right there right now
That friggin hose made no sense to me. The last power washer I bought, the one end of the hose stayed connected to the machine. The instructions for this one were unclear and I spent well over a half hour trying to figure out what I was doing wrong. I watched your video and was like “JFC...now I know why it was making no sense. I may just return this. I only bought it because it had a 15 inch surface cleaner and I bought the telescoping power washer pole to go with the wand, because I have very high windows that need power washed desperately. The telescoping pole has a brush and soap etc. I’ve not seen them on the other power washers. I may try it out once and see how it works and if I experience the same problems you had, I definitely will be returning it. Thanks so much for taking the time to do this video...it was very helpful!
same
SAME
I failed :(
You lost me when you started using your own equipment 🙄
The machine is a dud. No pressure and the motor gives out.
Then you got a defective machine, contact ryobi