DIY simple wire clamp tool from scrap metal
HTML-код
- Опубликовано: 1 ноя 2024
- #diy #wireclamp #scrapmetalrecycling #metalworking #tools #lifehacks #budget #easybuild #workshop #beginnerfriendly
This is my version of a DIY wire clamp tool
Thanks for watching SamoesA DIY
~-~~-~~~-~~-~
Please watch: "DIY How I build my own still"
• DIY How I built my own...
~-~~-~~~-~~-~
seriously !!! , thats much better tool than all the others,,, wow thnx man
I made one of these, too. Used an oilite bushing in the bore... other than that, same. Handy thing, this tool you made. It's a better connection than almost any other method, where it is viable.
Mantap bang,.,.. alat ini saya uda buat seperti ini dari 4 macam saya buat cuma alat dari Abang yg paling plexiblel Trm kasih Idenya Bang. Moga bertambah Rejekinya.
Terima kasih banyak, bro! Senang sekali mendengarnya. Selalu menyenangkan mendengar masukan
I've seen a couple of guys make this, but this is the best one. Well done Samoesa!
wow thanks man!
Ok
Simple to make, cheap, and it will last a lifetime! Couldn’t be better! Thanks for sharing!
Pretty simple and easier to make than others I’ve seen👍🏽
Bending the tips over, clever, thanks for that tip.
Is there a version that doesnt require welding? I've got everything else shown but no access to welding.
Well done. Darlington, South Carolina USA
That is the best ideal I saw
I made one, it works perfect thanks for sharing.
This is the best version of the tool I have seen. Going to make this one. Cheers!
I just copied this and getting the video ready.
@@cutweldngrind also I have made one of these Magi clamp. Slightly different style of clamp but very very good. ruclips.net/video/AQAHsh4s-wU/видео.html
I'm building this at the moment. I will upload my video this weekend.
I see you did build and upload a video. Good work
Good job. I used my Green Mountain grill wrench. Thanks for the great idea.
EXCELLENT VIDEO !!!
Yeah, that's what I like to see - work slipping in the vise with a dangerous power tool. No thanks.
On the plus side, I like the way you pre-bend the cut wire ends before bending down to the surface - no sharp ends to cut the next guy who comes along . . .
Stay safe my friends !!
If your metal bar was shorter, you wouldn't have so much wasted/pulling wire left on your tool. Thanks for the video, I learned from your mistake. ❤🌅🌵
true, this was just a example, but good advice
...так старался, что даже запыхался, молорик😉..!
да, я толстый,
maak nou reg waar jy op jou vice geswys het voor jou pa jou gat slaan. nice build, baie dankie.
Ja en hy kan hard slaan. 🤪
The metal rod he brushed clean had an orange lead oxide primer. Don't breathe that dust because it's toxic
Very nice project, but fairly poor camera work at times
agreed, this was my very first video. but thanks for watching
हम यही खरीदना चाहते है, तो कैसे खरीदे?
मैं उन्हें नहीं बेचता, लेकिन इसे बनाना आसान है।
I could pull out a better one from my ,,,,,,!!!!!😮
Just kidding. It's a simple "Twist"' in an expensive tool. Good work👍👍👍👍👍
i work in a hospital , alot of people need help to pull things out of their arse. please be careful where you put your tools.
Very nice!
Nice.
Good job
Super
Nice quick tool.. I like it... I'm sure your dad appreciates your starter burns on his vice. Must be the 1st time you used it to hold a wielding project .. ..There is only one set of rod starter burns on it...At least grind them off for him... There's got to be a better way to strike an arch...🤔
My own vice but yes, When there's too much buildup. It gets grind off and paint.
Why did you need to do that in the first place?
@@pappaclutch3266 It looks like he has a sacrificial chunk of steel welded to the vice for this purpose :o
I will be making
Samoesa van suid afrika? Hehehe
Nice tool
What is it didn’t even explain the use or anything
💪
All that work, I just bought mine in less than 15 seconds. My labor is worth more than the time spent making that crude device.
good for you, why you waste your precious time watching this crude video then?
Lewies Vorster I didn’t watch it all Cletus.
@@rickmeadows686 still wasting your precious time,
Lewies Vorster You have a hard time with criticism I see!
Well, some of us enjoy making things and the bonus is saving money.
all you SOBs have welders. :) I wish I did. I need to make a video of how I made my Clamper!!!
Harbor freight can get you Mig flux core for $99, Easily enough power for this job. A lot of good stick machines start at $180.
If your really going to get into it however you really want a 240v power with 6 gauge wire 50amp plug 6-50r outlet installed by a electrician. That’s about $300-450. The basic house 15amp 110v won’t get you very far, probably enough to do this job but I wouldn’t feel safe.
Buy a cheap flux core welder. Plugs into a normal outlet
Три реза и круга нет
Rachet type wire clamp my design
Do you have it posted on RUclips. Post a site.TKS
@@daveschidlmeier6425 I've been having similar variations popping up in my 'suggested view' feeds for a few weeks now. There's dozens up on YT. Some more eloquent than others. This one, if anything, is perhaps a bit bigger than most.
Dood gob