Thank you for reviewing this Drone. Thank you for giving a drone like this a chance for viewers to see what something on a lower price scale is actually capable of.
Im still on DJI FPV googles V1 are these worth putting an Air Unit in and running “Long Range”. OR am i doomed to have to purchase, at least an DJI googles V2 and O3 Air unit, in order to enjoy LRFPV?
Hi, I have a problem with the voltage sensor in my Speedybee F405Wing The value in INAV is up and down 13v~20v (I use 4S battery) I have changed the battery but the problem still occurs I am really frustate because I really like long range flight Do you know what component that I need to check? (It seems I broke that componen during soldering the cable) Is there any external Voltage Sensor available that can send the data through our Remote? Would it be possible for us to parallely connect the Receiver (Matek R24D) to Flight Control and CRSF to PWM converter The idea behind that because I heard we can get Vbat tellemetry to our remote using CRSF to PWM converter But at the same time I stil need OSD and Waypoint capability from Flight Controller
That rattling noise it's making reminds me of what happened to me on my first quadcopter build. I didn't put the elrs preset on it and I had. My radio turned all the way up to 1w it was a rookie mistake, but that's exactly what that rattling noise sounds like to me
Really impressive build for the price. Some hiccups, sorry but almost all of the motor screws falling out was hilarious. 😊 As for the poor video performance, could it be overheating, that's a lot of power pumped out of that little box. Possibly try it at one watt? Happy flying DrainMan. 😎
Your Nazgul is going to be leaps and bounds better than this quad is. I've never owned a Nazgul but iFlight knows what they are doing and they make some good BnF's for the price. Happy flying and enjoy it when you get it
vTX was overheating hehe. Not sure man. Looks like untrustworthy low vibration. It doesn't take much more to make a long-range drone than a 5-in. At all
These new cheap quadcopters really should be gone through completely. Even darwin has had some pretty crappy QC. Good antennas are a must. And outta the box, quality rx and camera. Heavy 8-9-10 quads are not something you wanna flyaway with. Yeah they are cheap but not for someone that doesnt have a good grasp on the hobby. Personally ive been down the “get it cheap” route and it never works out. Good stack, good build, take your time.
7mm is definitely not thick enough for arms on an 8 inch. I learnt early in my FPV journey to just spend good money on equipment straight away, the difference in flight quality and longevity is huge. There are some exceptions, maybe not this 🤔
I have a chimera 7 pro which is cool but legit if you wanna go far get a fpv plane 😂😂😂😂 no joke quads spends a lot of power pushing thrust down just to stay up airplane are much more efficient because they use wings to glide along using much less power
that was barely 300 meters, there is no way thats 2.5 watts. Some of these chinese analog vtxs wont go to full power unless you do a unlock and other stuff like switching channels to go full power even after you programmed it to a switch in betaflight.
Reading the product pages for the 8 and 10 inch drones. They seem to be made for load carrying, one way flights. Yeah... these are for war...I'm not supporting this company.
These drones are built to make a single one way flight carrying a 3kg payload I guess
that's some solid QC right there... 🤣
Thank you for reviewing this Drone. Thank you for giving a drone like this a chance for viewers to see what something on a lower price scale is actually capable of.
Always a good day when Drain Man releases a video
Wonder if it would be worth it to add gps, 03 air unit and run inav on it
i like so much your videos... congratulations!
Im still on DJI FPV googles V1 are these worth putting an Air Unit in and running “Long Range”. OR am i doomed to have to purchase, at least an DJI googles V2 and O3 Air unit, in order to enjoy LRFPV?
Hi, I have a problem with the voltage sensor in my Speedybee F405Wing
The value in INAV is up and down 13v~20v (I use 4S battery)
I have changed the battery but the problem still occurs
I am really frustate because I really like long range flight
Do you know what component that I need to check? (It seems I broke that componen during soldering the cable)
Is there any external Voltage Sensor available that can send the data through our Remote?
Would it be possible for us to parallely connect the Receiver (Matek R24D) to Flight Control and CRSF to PWM converter
The idea behind that because I heard we can get Vbat tellemetry to our remote using CRSF to PWM converter
But at the same time I stil need OSD and Waypoint capability from Flight Controller
That rattling noise it's making reminds me of what happened to me on my first quadcopter build. I didn't put the elrs preset on it and I had. My radio turned all the way up to 1w it was a rookie mistake, but that's exactly what that rattling noise sounds like to me
Yeah mine does it at like 600 and 800 and 1w and up don't know why
@@brandonbrodbeck6688 there's a specific tune that you have to use with elrs when you turn up htz
First three words of the title had me hooked.
@12:50 right about now I'd be feeling pretty anxious 😰 that video feed is a rough flying experience. I love cruising a few km on DJI 😂
Really impressive build for the price.
Some hiccups, sorry but almost all of the motor screws falling out was hilarious. 😊
As for the poor video performance, could it be overheating, that's a lot of power pumped out of that little box. Possibly try it at one watt? Happy flying DrainMan. 😎
Hoping my $200 Nazgûl ECO comes out of the gates stronger… alrighty it just needs to happen… (video to follow) thanks for the encouragement, D-man
Your Nazgul is going to be leaps and bounds better than this quad is. I've never owned a Nazgul but iFlight knows what they are doing and they make some good BnF's for the price. Happy flying and enjoy it when you get it
Looks like they didn’t torque the screws in.
I wonder how it would do in 18650 style bats and probably would be good to have a gps.
Nice one Drain man
Seems like they have some stuff to work on. Now I see why it's only $200.00 😢
Stu from just reviewed one, and it didn't go very good.
vTX was overheating hehe.
Not sure man.
Looks like untrustworthy low vibration.
It doesn't take much more to make a long-range drone than a 5-in. At all
These new cheap quadcopters really should be gone through completely. Even darwin has had some pretty crappy QC. Good antennas are a must. And outta the box, quality rx and camera. Heavy 8-9-10 quads are not something you wanna flyaway with. Yeah they are cheap but not for someone that doesnt have a good grasp on the hobby. Personally ive been down the “get it cheap” route and it never works out. Good stack, good build, take your time.
On ali they sell 7 inch frames for 14 bucks. I guess they produced to many for east europe and want to get rid of them.
lol man they checked that one real good lol
just ordered parts from ali back to school sale for my first 7 in quad, sub 160$ total nothing fancy
Remember that old adage.."You get what you pay for " Or how about "Caveat Emptor"....? 🤔
falling victim to the large quad vibration issue i see,a better tune should fix some of that and lock tight on those pesky screws lol,great vid fam.
7mm is definitely not thick enough for arms on an 8 inch. I learnt early in my FPV journey to just spend good money on equipment straight away, the difference in flight quality and longevity is huge. There are some exceptions, maybe not this 🤔
I have a chimera 7 pro which is cool but legit if you wanna go far get a fpv plane 😂😂😂😂 no joke quads spends a lot of power pushing thrust down just to stay up airplane are much more efficient because they use wings to glide along using much less power
One way ticket😂😂😂
that was barely 300 meters, there is no way thats 2.5 watts. Some of these chinese analog vtxs wont go to full power unless you do a unlock and other stuff like switching channels to go full power even after you programmed it to a switch in betaflight.
Dayum
Just like Payless shoes stores...you pay less you fly less.
Blanket 8
Now we know why it's so cheap 🤣
hmm wonder if it will hold my 15,000 mah 6s lol
💩PRE-FLIGHT
Junk. I'd rather spend the extra for quality
Reading the product pages for the 8 and 10 inch drones. They seem to be made for load carrying, one way flights. Yeah... these are for war...I'm not supporting this company.
For real. Don’t give them your $200, watch them go bankrupt trying to survive on DoD contracts alone. 😂
3 min ago something really excited was posted
#onewaydrone