Rockford Fosgate Subwoofers - Prime + Punch
HTML-код
- Опубликовано: 17 окт 2024
- See the entire Rockford Fosgate Subwoofer line:
www.qualitymobi...
Rockford Fosgate is known by all bass fanatics for their relentless hard hitting bass. Rockford has one of the largest line-ups of car subwoofers with three different lines. Within those lines there are 3 performance levels.
Prime, Punch, and Power are all performance subwoofers and push the envelope with their output.
We walk you through the entire Rockford Fosgate line of subwoofers.
The Rockford Fosgate Prime Subwoofer line-up:
R1S4-10
R1S4-12
R2D2-10
R2D4-10
R2D2-12
R2D4-12
R2SD2-10
R2SD4-10
R2SD2-12
R2SD4-12
The Rockford Fosgate Prime Subwoofer line-up:
P1S2-8
P1S4-8
P1S2-10
P1S4-10
P1S2-12
P1S4-12
P1S2-15
P1S4-15
P2D2-8
P2D4-8
P2D2-10
P2D4-10
P2D2-12
P2D4-12
P2D2-15
P2D4-15
P3D2-10
P3D4-10
P3D2-12
P3D4-12
P3D2-15
P3D4-15
P3SD2-8
P3SD4-8
P3SD2-10
P3SD4-10
P3SD2-12
P3SD4-12
Be sure to check out our video on the Rockford fosgate prime subwoofers in pre-loaded enclosures for more information on them.
These are some good subwoofers I have the P3's and they hit hard
he never talked about power series...wtf?!?!?!?!
Thinking of getting the p2d2 fosgates 10s..but i see the Skars 10 inch subs are a bit cheaper which would u recommend..
Is it good choise if I use monoblock RF R500x1D for sub P3-12D4 ?
I think so. I even think t500-1bdcp is good. Cause even im planning to get 1.
i need help. im getting a p3d2 10inch sub and i was wanting to get the 500 watt prime rockford amp. is that amp enough to push my sub? is there better options?
That should be solid! The Punch amps are better but more expensive, that prime will work great but remember it is a monoblock so you'll only have 1 channel
Thinking about a Fosgate. Been beating the hell out of my sundown sa for 2 years now and my ab xfl crapped out on me early. Might go with a p2 or p3.
I had a sundown x18 and now I went to 3 p3 10s
Just grabed me a a set of the p1 punch subs in 12'! With a beautiful ported box and i love how fosgate wired the subs in parallel i belive it is from the factory so all their is is a single speaker terminal to mess with Just splice the posi and neg s together and snap in! Gots a kicker dx 250.1 mono block pushing these bad boys and they hit hard! I Dont have it perfectly tuned in quite yet but so far the bass is clean and deep even with a kicker amp pusshin em kicker dose make some good shit but soon im going to have to upgrade that amp to a fosgate mono block cause this kicker is a tad underpowerd
Christopher Sciamanna It is definitely underpowered with that amp. Did you get your set before watching the video or after?? Congrats on the purchase!
I have a set of Rockford Fosgate Punch 12's in a enclosed box, what the best Rockford Fosgate amp to go with them?
Do you have the 2 ohm or 4 ohm subs?
Quality Mobile Video admin, i have a little concern, i hope you can give me some advice or answer. I have 12 inch P2D2-12 Rockford Subwoofer, and R500X1D Rockford Amplifier? Are they gonna work fine? Hope you can help me. Thank you in advance
Already answered it Martin in your previous comments! Should be fine!
Quality Mobile Video Thank you admin, much appreciated. Can i buy a Rockford Wiring kit to your shop using my Master Card?
Absolutely! Here's one that I suggest to use with that amp! Just add it to your cart and you'll be good to go!
Quality Mobile Video admin, do you have facebook page or facebook account?
facebook.com/qualitymobilevideocom-292229920826823
Wonder how Rockford's slim subs pair up against jl audio's tw line of subs?
My amp will output 600RMS@2ohms. Looking for 2 shallow tens. What would be recommended? My box will allow for 1.05cf with a depth of 5in in a downfire config.
These all work!
www.qualitymobilevideo.com/43cvt102.html
www.qualitymobilevideo.com/ts-sw2502s4.html
www.qualitymobilevideo.com/rockford-fosgate-r2sd2-10.html
www.qualitymobilevideo.com/rockford-fosgate-p3sd2-10.html
Quality Mobile Video thanks for the quick reply
Of course! We have free shipping over $100
im running 2p3 15 inch on SLP AMP5500 watts in a sealed closure box
Got two truck boxes with p2s 12 with a 500.1 amp putting in a 2002 extra cab ford ranger.
And the power?
The p3 is the best but the p1 and p2 have considerably smaller motors beneath those plastic covers. I’m running 2 15” p3 subs in a ported enclosure on a Rockford fosgate 2500.1 amp on 2 d51 yellow tops. Haven’t been let down yet.
2500x1?
@@torlandmusiq more like 3300x1 cause it be under rated
Are these weather resistant
Nope
Have 2 p1 12 running 1200 brutus elite. Eny advise on what whould b a beter amp
For thoes subs your good.
I like the product description.
Whats the best amp to use for 2 shallow r2s
+Daniel Hernandez Check these out!
www.qualitymobilevideo.com/rockford-fosgate-r150x2.html
www.qualitymobilevideo.com/rockford-fosgate-p400x2.html
www.qualitymobilevideo.com/rockford-fosgate-p300x2.html
What about the bigger rockford p3
What's the best amp to get to push a set of P2 12 inch subs. ..please help
+Wilson Ent It depends on the impedance of the woofers. You might be able to get away with the P500X1BD. www.qualitymobilevideo.com/rockford-fosgate-p500x1bd.html You may need to go up to the P1000X1bd as you would be pushing the P500X1BD all the way. www.qualitymobilevideo.com/rockford-fosgate-p1000x1.html Let me know what impedance your woofers are and I can make a better reccomendation.
im runnin my p3ss with pioneer 2400w 1400rms monoblock nice settup
I ran my P2D412s (I had a pair) with the Rockford R1200.1D wired down to 1ohm. Very solid, clean and accurate bass. If you’re running just one P212 you’d do just fine with the R500.1D or the R750.1D
What's a good rockford fosgate amp for a single p3 10in?
+alexelgrande93 Check these out: The P1000X1BD ruclips.net/video/UFQkgZEZSWQ/видео.html
+alexelgrande93 And the P500X1BD ruclips.net/video/I7UAOSVDl0I/видео.html
Hopefully someone can help me figure this out: I'm looking at the Rockford Fosgate P300-12 12" powered loaded subwoofer currently. This is my first ever car subwoofer, so I want to make things easy as far as messing with amp choices and the ability to quickly take the subwoofer out when I need the space in my trunk. The question I have is what Punch model does the P300-12 come with, as far as P1, P2, or P3? Also, if I ever want to upgrade, say the P300 has the P1 woofer, and I want the same size P3, is it possible to replace the P1 with a P3 with the same amp and enclosure that is the P300-12?
Rockford doesn't say whether its a P1, P2 or P3 woofer. It looks different than all of those, definitely a different cone, so I think its just a woofer designed specifically for the enclosure. If I was to guess I'd say its a P1. In terms of replacing it, again I'm not 100% and they don't confirm anywhere if you can, but I think you can. Front panel has removable screws so you probably could replace it
Quality Mobile Video Okay. I'll look into it, but from the looks of it, these P300s will last a long time if taken care of properly, so I don't think I'll have to worry about replacing the cone.
I definitely agree, I've shot them in person, you can tell they're really durable
We've got free shipping on it right now check it out on our site! www.qualitymobilevideo.com/p300-12.html
Quality Mobile Video Is there a video you have on them? I'm trying to get a good sound bite from a video with the p300-12; I'm looking for a good punch, but not obnoxious bass.
What get better sound... with a P3D4-10 or P2D4-12... I have a amplfier P500x1 and almost only hear eletronic musics!
Thanks a lot
+Arthur Barros sonically they are about the same P3 will play louder.
But 12in has more bass than 10in because of the size? I mean it could be better for eletronic music
Larger cone with larger excursion is what creates more bass. P3's have a larger Xmax. You'd be hard pressed to hear the difference between these two in a double blind study, maximum volume in a given enclosure is what you will notice most.
You will get more performance from a P3 "10" then a P2 "12".
What is better Kicker or Rockford
rockford
Definitely Rockford Fosgate is much better then kicker.
Fosgate é Fosgate né papai 👏🏾😍🇧🇷
camera fade is annoying..but thanks for the information.
Good for the money
I got a set of p1 punch 12inch, with a alpine mrv500watt monoblock! @2 ohms these things pound!
You need the right amp to play with these bad Boyz
These guys aren't authorized to sell Rockford Fosgate products.. Wtf
I use 2 r1 12inch subs it plays awesome for the price my mirrors cant be still
4 ohm 1200 watts 600 Rms
I have two 12" P3D2s
Nice!
Not even a shoutout to the Ts?
+John Harris T-series is not available online, only through unauthorized dealers can you buy T-series. We are an authorized online dealer.
Those fade to black cuts are bloody awful. Good coverage though 👍
4 year old video, hopefully you think we've improved since then
I literally read this word for word online... could you not come up with anything to say ?
We read every line word for word? Would love the link to the entire script word for word online
Punch is good but only like pro.
Over hype subs yea they hit clean but not hard and overpriced
I have 2 10 inch p3 shallow mount dual coil. What's a good amp for those 2?
+eddie z (eddiesepictouch) Are yours dual 2 ohm or dual 4 ohm?
+Quality Mobile Video dual 2 ohm
+eddie z (eddiesepictouch) OK I'm not sure if there 2ohm or 4ohm
eddie z do you know the part number?
+Quality Mobile Video it's 2 ohm and the gave me this will it work
www.amazon.com/gp/aw/d/B00BMR7UPS/ref=mp_s_a_1_fkmr0_1?qid=1456250355&sr=8-1-fkmr0&pi=AC_SX236_SY340_FMwebp_QL65&keywords=Pioneer+mrv+m500+amplifier