Great video, I learned my lesson about all the aluminum with the savage platform also. I took a ss,and .25 and made them full aluminum and it completely ruined them. They were so slow and heavy that when I put power to them they broke driveshafts over and over. And I had the mip HD ones. It was an expensive lesson. I do still have 4 more and am looking at getting a twin engine one just as soon as the guy comes down on the price a little.
For everyone giving me tuning advice.. I attempted to get this going again this morning only to find the engine stuck. When I originally purchased this the last owner told me his buddy had used a sleeve pincher on both engines which made the sleeve extremely tight. I got the piston freed as it had simply cooled off at top dead center. I don't think it ever got re-broke in. Which is why it had a one way bearing bad when i got it. So I am heating up the engine now and doing a complete breakin like if it was rebuilt or new.
I'm looking at a twin with new xtm 27.4 engines and some sickass duel chamber exhaust, but the getalmen what's pretty high dollar for it so may have to wait till I sell a few trucks. But I have found out that time is the best nagotiion tool.
Great vid and truck those are rare to find now and days I’m pretty sure that the side frames, gas tank, and engine mount is all part of the set and they are pretty expensive now and days
I have 6 of them, i wanna sell one savage x, its in great condition and runs perfect. Are you interested in it? I also have a 4.6cc force engine and a 4.8cc Nitro bull engine spare for it
Yea it’s either got an air leak of some sort or it’s wayyy to lean. I had a Revo and a savage and they wouldn’t shift until warmed up usually. Man get ya an lrp 32,put a novarossi carb on it and a 9886/41001 pipe combo and that thing will be way more fun than dealing with two engines for sure. Picco makes some great engines though. Keep at it bro you’ll get her running great. Never give up.
@@koshaocpb It would be the tank included with a twin engine conversion kit. I bought it this way. Pretty sure it's HB55305. By HPI, Truckzilla twin kit. Probably discontinued between 05-08
It would. I don't see myself buying 2 engines for it though. Will probably get to ebay sometime. Tuning with new engines would save a huge amount of time though.
If your intrested in a twin i know were there is a twin that is really rad has duel pipes. 2 28.7 xtm engines i believe they are that only have 3 tanks of breakjn on them and it comes with a dx3r
Nitro is challenging and everything needs to be in order. Electric is boring to me and I love nitro RC. Sounds like your motor is starving from fuel? Too lean. Nice savage bro 👌
LSN way too lean buddy, You should never have to adjust the low end after break in.. That's a set it and forget it! Also you're idle is up high that's why your tune was inconsistent.
If you read in the comments I just broke this in a couple weeks ago. I don't think it ever got broke in again after the sleeve was pinched. The video is from 4 months ago. Running fine now. Thanks for watching.
After I broke both engines in after this video. I haven't gotten it out for a long time. Maybe will get it out again sometime. The other savage is way easier to tune with the losi engine. I had messed with the shift points. It just plain wouldn't rev or tune because it wasn't broke in.
@@twin2turbo87 everyone’s got there cup of tea i just enjoy working with a motor. And thank you! Yea completely restored from the round up, done a few 465s and about a dozen other vintage bikes to. Sweet bikes, hell to kick over haha.
Great video, I learned my lesson about all the aluminum with the savage platform also. I took a ss,and .25 and made them full aluminum and it completely ruined them. They were so slow and heavy that when I put power to them they broke driveshafts over and over. And I had the mip HD ones. It was an expensive lesson. I do still have 4 more and am looking at getting a twin engine one just as soon as the guy comes down on the price a little.
For everyone giving me tuning advice.. I attempted to get this going again this morning only to find the engine stuck. When I originally purchased this the last owner told me his buddy had used a sleeve pincher on both engines which made the sleeve extremely tight. I got the piston freed as it had simply cooled off at top dead center. I don't think it ever got re-broke in. Which is why it had a one way bearing bad when i got it. So I am heating up the engine now and doing a complete breakin like if it was rebuilt or new.
I'm looking at a twin with new xtm 27.4 engines and some sickass duel chamber exhaust, but the getalmen what's pretty high dollar for it so may have to wait till I sell a few trucks. But I have found out that time is the best nagotiion tool.
@@nitrobyrd7636 how much does he want?
@@twin2turbo87 700
In order for the hoi savage to shift they have to be warmed up and the tune the set screws on the trans
Great vid and truck those are rare to find now and days I’m pretty sure that the side frames, gas tank, and engine mount is all part of the set and they are pretty expensive now and days
Thanks for watching Alex.
I have 6 of them, i wanna sell one savage x, its in great condition and runs perfect. Are you interested in it? I also have a 4.6cc force engine and a 4.8cc Nitro bull engine spare for it
❤😂🎉😢😮😅😊. ไฟไฟไฟไฟไฟแอดพ์
❤😂🎉😢😮😅😊ไฟไฟไฟไฟไฟแอดพ์. ? ??
Yea it’s either got an air leak of some sort or it’s wayyy to lean. I had a Revo and a savage and they wouldn’t shift until warmed up usually. Man get ya an lrp 32,put a novarossi carb on it and a 9886/41001 pipe combo and that thing will be way more fun than dealing with two engines for sure. Picco makes some great engines though. Keep at it bro you’ll get her running great. Never give up.
Thanks for the confidence. I appreciate the input.
Sounds like it needs tuned in a bad way.
I like that fuel tank setup
Toooo leannnn richin it up lower that idle!!
updates above.
nice build. do you know where i can find the fuel tank you have installed?
ebay is the only place I know of.
@@twin2turbo87 gotcha. What’s the name or size of that tank?
@@koshaocpb It would be the tank included with a twin engine conversion kit. I bought it this way. Pretty sure it's HB55305. By HPI, Truckzilla twin kit. Probably discontinued between 05-08
Who is the music playing in the background?
That is music I mixed. I forgot what program.
Low speed much too lean
And you have an airleak in your fuel lines thats why your tune keeps going all Chewbacca. Well in my experience thats it 95% of the time.
Thanks for ths input. I haven' replaced the lines they are probably dried out. It is heavy. Lol
Ooohh way too lean.. Would be cool with 2 dynamite big reds
LRP 28? Would rip
It would. I don't see myself buying 2 engines for it though. Will probably get to ebay sometime. Tuning with new engines would save a huge amount of time though.
If you get tired with it and want to sell it. I'm interested.
Thanks for the interest
If your intrested in a twin i know were there is a twin that is really rad has duel pipes. 2 28.7 xtm engines i believe they are that only have 3 tanks of breakjn on them and it comes with a dx3r
What's he asking for it?
I have those twins on my twin titan
Subbed
Nitro is challenging and everything needs to be in order. Electric is boring to me and I love nitro RC. Sounds like your motor is starving from fuel? Too lean. Nice savage bro 👌
Thanks for watching Brian. Be sure and checkout the follow up videos.
LSN way too lean buddy, You should never have to adjust the low end after break in.. That's a set it and forget it! Also you're idle is up high that's why your tune was inconsistent.
If you read in the comments I just broke this in a couple weeks ago. I don't think it ever got broke in again after the sleeve was pinched. The video is from 4 months ago. Running fine now. Thanks for watching.
Like to sell it .....
Got Air filter on it got dirt in the motor still wanna buy it
Not very badly. It's never been ran without an air filter. I'd have to get ebay money for it.
@@twin2turbo87 whats the price I don’t need motor just both motor mounts how much
@@OhighoboyJayLeo $1200 is ebay money. I would include a radio for that price. I would only sell it complete.
Actually now $1600 is ebay money after a quick search. I'm a few years behind. But I'd still take 1200.
Tune your low speed it's too rich
After I broke both engines in after this video. I haven't gotten it out for a long time. Maybe will get it out again sometime. The other savage is way easier to tune with the losi engine. I had messed with the shift points. It just plain wouldn't rev or tune because it wasn't broke in.
Idle way to high
Electric is just plug and bash not a hobby lmao.
That's a good way to put it. Nice 490. My brother had one back in the day, 1990 I think it was. The bike was an 82 had gold wheels.
@@twin2turbo87 everyone’s got there cup of tea i just enjoy working with a motor. And thank you! Yea completely restored from the round up, done a few 465s and about a dozen other vintage bikes to. Sweet bikes, hell to kick over haha.
Your carburettor setting are terrible