🏅 Ninos' 737hp, 8sec Nissan 180SX - Haltech Heroes

Поделиться
HTML-код
  • Опубликовано: 13 фев 2017
  • Ninos loves drag racing and has a bit of a soft spot for the 180SX, both reflected in this '98 Nissan: "I really wanted to keep those classic 180SX lines and not turn it into an outright drag car."
    In this video we take a closer look at this 737hp, 8sec, street registered weapon.
    See this car in action: • SR22VE 8 SEC 180SX ADV...
    Liked this video? Here are more like it:
    Mechanical Stig's V8 Stagea: • 🏅 Mechanical Stig's tu...
    JEM's street legal, 1000hp R34 GTR: • JEM's 1000hp, 9second,...
    Brian's Time Attack Z06 Corvette: • 🏅 Time Attack Z06 Corv...
    ---------------------------------------­---------------
    Like this video? Subscribe to our Channel.
    ---------------------------------------­---------------
    For more Haltech goodness check out our:
    Website: www.haltech.com
    Facebook: / haltechenginemanagement
    ~-~~-~~~-~~-~
    WATCH NEXT: "🏅 Jason Waye's Barra Powered Fox Body | HALTECH HEROES"
    • 🏅 Jason Waye's Barra P...
    ~-~~-~~~-~~-~
  • Авто/МотоАвто/Мото

Комментарии • 66

  • @The_JDM_Dynasty
    @The_JDM_Dynasty 7 лет назад +19

    That engine bay is so neat... wow! Loving this 180

    • @haltech
      @haltech  7 лет назад +5

      It truly is one of the nicest 180 engine bays we've seen:)

  • @wanteds13
    @wanteds13 7 лет назад +6

    Full metal widebody? I would love that! I always loved the look of nice wide fenders, but something feels wrong about cutting perfect fenders and glueing tupperware onto it...

  • @andrew9727ful
    @andrew9727ful 7 лет назад +4

    finding a p11 vvl head is hard enough thats a p12 head !! love it

  • @jamalkherry5296
    @jamalkherry5296 7 лет назад +16

    On a 4 banger? Good lord. It must idle like the devil.

    • @griplimit261
      @griplimit261 7 лет назад +3

      Jamal Kherry on the contrary, those vvl heads can provide a pretty smooth idle due to fact it has a smaller lobe profile at lower rpms. sorta like v-tec.

  • @KobeMontana
    @KobeMontana 7 лет назад +4

    Metal pumped guards and VE head is where it's at. The car inside and out is very tasteful

    • @haltech
      @haltech  7 лет назад +1

      No arguments here:)

  • @WhatUpTKHere
    @WhatUpTKHere 7 лет назад +1

    Amazing that thing is registered...

  • @garybrown4671
    @garybrown4671 7 лет назад +1

    Very nice build

  • @goodkill1
    @goodkill1 7 лет назад +1

    that 180 is nasty, full dash and door covers!?! wish my rx7 could look like that.

  • @GCGeekArmy
    @GCGeekArmy 7 лет назад +1

    Not usually a Nissan fan but damn that looks good

  • @tedbear631
    @tedbear631 6 лет назад +1

    sick... so sick

  • @Vendoman500
    @Vendoman500 7 лет назад +1

    Damn this car is clleeeeeean

  • @mcullennz
    @mcullennz 7 лет назад +2

    Not only does neovvl adjust cam timing but lift on both cams (similar but better vtec)

  • @vgannon-7303
    @vgannon-7303 7 лет назад +1

    Wow.

  • @danielbrealey2924
    @danielbrealey2924 7 лет назад +1

    #streetcarornocar!!! The way it's meant to be

  • @scadieee
    @scadieee 7 лет назад +1

    Literally want his exact setup in my s13 minus the auto

  • @SpikeKastleman
    @SpikeKastleman 7 лет назад +4

    I wanna hear it roar!

    • @haltech
      @haltech  7 лет назад +1

      Click the link in the description - you can hear it on song powering down a quarter mile:)

  • @elucid07
    @elucid07 7 лет назад +1

    VCT is variable cam timing. VVL is variable valve lift/duration.
    Come on guys, you should know this.

    • @haltech
      @haltech  7 лет назад +4

      You're absolutely correct, that's exactly what VVL stands for. We've noticed it after the video went up. Our sincere apologies.

  • @Smokey7186
    @Smokey7186 7 лет назад +5

    engine sound please...

    • @haltech
      @haltech  7 лет назад +2

      We put a link in the description with a video of the car's quarter mile run.

  • @psementalist
    @psementalist 7 лет назад +10

    Ok there's a bit more power in there then Moog has in his 180

    • @haltech
      @haltech  7 лет назад +5

      Just a bit:) And today it's getting Nitrous hooked up:)

  • @Kranbone
    @Kranbone 7 лет назад

    How can it be street registered? Is the car legally engineered?

  • @incolink
    @incolink 7 лет назад +2

    that would be a great car for 30 grand ... but it looks like he's spent about 100 or 2 in witch case Id prefer a 911 turbo

  • @lewissears2976
    @lewissears2976 7 лет назад +1

    Who made the exhaust manifold?

    • @scadieee
      @scadieee 7 лет назад +3

      Lewis Sears if I'm right I believe it's a hypertune manifold. I think he has a build thread on zilvia. But here's the manifold link
      m.facebook.com/HypertuneAustralia/posts/800422789970711

    • @haltech
      @haltech  7 лет назад +3

      Hypertune has done all of the fab and piping so we suspect they're responsible for the exhaust manifold as well.

  • @TheJermuFin
    @TheJermuFin 7 лет назад

    Is the heat wave still there? You´re swetting bullets :D

    • @haltech
      @haltech  7 лет назад +3

      We shot the video on one of the hottest days this year. It was about 45C outside and about 50C in the garage. We had to stop every few minutes to wipe sweat from Matt's forehead. The things we do....

    • @TheJermuFin
      @TheJermuFin 7 лет назад

      Haltech Greetings from Finland. We have a nice -10 in here. Keep up the great videos!

  • @usherly
    @usherly 7 лет назад +10

    variable valve LIFT....not so much variable valve timing ;)

    • @haltech
      @haltech  7 лет назад +1

      Correct. We did notice that after the video went up:(

    • @wanteds13
      @wanteds13 7 лет назад

      Well, it has two lobe profiles... so not only the lift is variable but also the duration and timing. It basicly has two sets of cams that you can switch between, like VTEC.

  • @ThaVoodoo1
    @ThaVoodoo1 7 лет назад

    New South Wales has better laws on modified vehicles than Queensland.
    It is illegal to have nitrous oxide system in a street registered vehicle in QLD including if the bottle is removed. I wish QLD was the same as NSW with car mods.
    www.tmr.qld.gov.au/Safety/Vehicle-standards-and-modifications/Vehicle-modifications/Frequently-asked-questions-vehicle-standards-and-modifications.aspx#nitrous

  • @mndayman
    @mndayman 7 лет назад

    what stroker kit BC or tomei?

    • @haltech
      @haltech  7 лет назад +1

      It's a Nitto stroker kit

    • @mndayman
      @mndayman 7 лет назад

      Haltech oooh interesting, the only one i haven't looked into haha

  • @cossiedrifter
    @cossiedrifter 7 лет назад +1

    So is it bonnet or hood? ;)

    • @tank2g2
      @tank2g2 7 лет назад

      Bonnet

    • @cossiedrifter
      @cossiedrifter 7 лет назад

      tank2g2 But he said both :)

    • @tank2g2
      @tank2g2 7 лет назад

      He watches too much American TV

  • @unijabnx2000
    @unijabnx2000 7 лет назад

    true VET head??

  • @Alx.c98
    @Alx.c98 7 лет назад

    ik its built for drag but as soon as i saw it was auto meh. Not the same, a sequential box would've been my choice in this application.

  • @GTtSiR
    @GTtSiR 7 лет назад

    Πιστεύω !?

  • @samtheman641
    @samtheman641 7 лет назад +1

    wasn't this car stolen awhile ago

    • @haltech
      @haltech  7 лет назад +1

      Yes it was:( A couple of weeks after this video was shot in fact. It's a sad world we live in. Some people just seem to have no problems with stealing something someone else has poured their heart and soul into, not to mention all their spare cash.

    • @samtheman641
      @samtheman641 7 лет назад

      Haltech sad story i seen it on fb just came in my mind when i seen this video it was a beautiful car feel sorry for the owner

  • @nsrracing1
    @nsrracing1 5 лет назад

    Really cause what I was thinking is holy rice cakes what did you spend on this?! AMD its street registered so there must be no emission in your country I supposed cauae there is no way this thing is clean.

  • @crakrotary
    @crakrotary 7 лет назад

    Did they ever recover this car after those pricks pinched it

  • @martinallanhates
    @martinallanhates 7 лет назад +1

    doesnt look stock at all mate

  • @JordyValentine
    @JordyValentine 6 лет назад +1

    Hope the owner got this back, was devo to hear it was stolen

    • @haltech
      @haltech  6 лет назад

      Unfortunately it appears to be gone for good :(

    • @JordyValentine
      @JordyValentine 6 лет назад

      Haltech oh my god, that's so sad! Makes me want to bolt my ute to the garage floor. Just one look at this car and you know it's the owners pride and joy, bloody thieving animals!

    • @johnrogers1133
      @johnrogers1133 6 лет назад

      Wow wtf was it parked on the street? I own an immaculate 180sx type x and im always paranoid its going to get stolen even when I just go into the supermarket. They are super easy to steal. Thankfully I have a lock up garage at night for it. Sadly this its probably been parted out now. Hope he gets it back tho its a beautiful machine with very tasteful mods.

  • @samforsey
    @samforsey 7 лет назад

    his rear tyres look underinflated

  • @TRUNYA1
    @TRUNYA1 7 лет назад

    Neno??? Could of sworn his name is Ninos...

  • @johnw5657
    @johnw5657 7 лет назад +2

    Looks like the owner has gone to great lengths and expense to keep this thing street legal. The cops in VIC a bitch when it comes to import cars (especially highway patrol). They will pull you over without any reason to defect you. Trust me I know, they actively target S-chasis cars.. I have a 180sx myself and I have to keep it very stealth to avoid defects.

    • @haltech
      @haltech  6 лет назад +1

      It's a sad state of affairs when you get pulled over just for driving a particular type of a car:(

  • @teamEP789
    @teamEP789 7 лет назад

    tatoo says Πιστ...η?

    • @DimJimi
      @DimJimi 7 лет назад

      κι εγώ έτσι λέω..

  • @rambow70
    @rambow70 7 лет назад

    8 second? SR bottom end? Nahhhh