Wow, they took out the original 200 hp engine and replaced it with a Harley engine that probably makes 60-80 hp at the crank. That will do something for your performance, but not good.
My question is what vehicles in this video had 200hp before the Harley swap? I see a couple cars that made 60-80hp, some quads and snowmobiles that obviously did not make 200hp. Hell, the cars and vehicles in this video didn''t make 100hp before the swap. That being said, even if they used a stock Sportster motor (most these swaps seem to have Sportster motors) they would make roughly the same hp/tq as the preswap motor except the Harley motor is several hundred pounds lighter than the stock motors. Then there is the aftermarket for the Sportster motors. I have a 2018 Sportster, it had 85hp and 80tq with an intake, tuner, exhaust and cams. I have since done a s&s 1250cc big bore with forge flat top pistons with larger valve pockets for the headwork/bigger intake/exhaust valves, feuling 505/515 cams, vance and hines fp3 tuner, s&s tear drop intake, feuling endurance valve springs, feuling hp+ lifters, hammer performance push rods, buell bronze oil pump gear, screamin eagle plugs and wires, dynatek EFI ignition coil, barnett extra plate clutch pack, barnett billet pressure plate, barnett 25% diaphram spring. Between the motor and transmission the bike is making 105-110hp and about 95 ft/tq to the wheel and the entire bike weighs just over 500lb. The motor is about 250lbs, so with the motor I have built it would certainly have better performance than any of the motors that came in those vehicles.
I’m in love. That 4 wheeler was awesome.
They sound like mini V8s
True
A Harley Davidson engine in a 1976-87 Chevy Chevette is a great one to do.
Harley quad should be Street legal
After seeing the 4wheeler w/ an EVO I want to find a RZR w/ a blown engine and do the same thing!
true. Do it for Dale
The quad one is kinda cool
I love Harley powered all terrain vehicles.
I love nuts in my mouth.
@@ball7411 That got awkward...
I have an electric golf cart with a very loud stereo. I play Harley top fuel drag tapes at full volume.
I still want to make a Harley powered jet sky I only ever saw one in 40 years but it was so damn cool I wanted to make my own but never had the chance
That's the only time in history that a Prius has ever been cool
So I use a regular car transmission or the motorcycle one? How do I adapt the engine to a car transmission? Any adapter plates premade?
Also great in Chevy Cavaliers as options.
Awesome
beautiful
SUPER COOL 😎 👌
Hilarious turning a prius into a gasoline engine
Almost like everyone that has these swaps dont know how to shift.
👍
Wow, they took out the original 200 hp engine and replaced it with a Harley engine that probably makes 60-80 hp at the crank. That will do something for your performance, but not good.
G56AG that’s not the point
Lol i dont think you know how much power those engines are capable of making, and i gurantee it has more torque
My question is what vehicles in this video had 200hp before the Harley swap? I see a couple cars that made 60-80hp, some quads and snowmobiles that obviously did not make 200hp. Hell, the cars and vehicles in this video didn''t make 100hp before the swap. That being said, even if they used a stock Sportster motor (most these swaps seem to have Sportster motors) they would make roughly the same hp/tq as the preswap motor except the Harley motor is several hundred pounds lighter than the stock motors. Then there is the aftermarket for the Sportster motors. I have a 2018 Sportster, it had 85hp and 80tq with an intake, tuner, exhaust and cams. I have since done a s&s 1250cc big bore with forge flat top pistons with larger valve pockets for the headwork/bigger intake/exhaust valves, feuling 505/515 cams, vance and hines fp3 tuner, s&s tear drop intake, feuling endurance valve springs, feuling hp+ lifters, hammer performance push rods, buell bronze oil pump gear, screamin eagle plugs and wires, dynatek EFI ignition coil, barnett extra plate clutch pack, barnett billet pressure plate, barnett 25% diaphram spring. Between the motor and transmission the bike is making 105-110hp and about 95 ft/tq to the wheel and the entire bike weighs just over 500lb. The motor is about 250lbs, so with the motor I have built it would certainly have better performance than any of the motors that came in those vehicles.
Yeah those suck regardless of how cool they sound it’s got to have performance upgrades not the other way only. The atv is two huge thumbs up!
Toy bike engine on toy cars.
better than appliance engines in boring appliances.
Yes alex they are exactly that toys and they are meant to played with
Junk
What do you drive/ride?