I have a slight problem. The radar works in game but depending on what aspect I use, (which is 16x9) the radar would shift. But if it’s 4x3 it works fine. So if I use 16x9 resolution do I need to take the radar screenshot in my native resolution?
I followed every single step, but my spectate radar doesn't work :( I think the "_spectate.dds" isn't working anymore after panorama update. btw, you're the best one!!! You help me A LOT! Thank you so much.
Pretty sure he missed it but didn't hear what to do about the 1024x768 people. I assume its cut it down to 768x768 but from there im lost. I got my square 768x768 but if i resize it to 1024x1024 the position will be botched and misaligned EDIT: best thing to do that i found is do the 1024x1280 and then the add your taskbar to the screenshot and then while in paint just paint it black to match the background and you can clip it to 1024x1024 that way and it works goood.
hey so I followed all the instructions but my map on the radar is too small. okay so I have CT and B set in the perfect locations but when I walk over to my stairs it acts as if I am in a, which th stairs lead to a but the map on t side and a sight are scrunched it seems. HOW DO I FIX THIS.
Followed it all but the minimap is badly misaligned, it's only just visible from an outer corner of the map. The scale is roughly correct though I can't really tell due to the level of misalignment.
Ok i have an issue now. I copied and pasted the overview as a comment into the text file and copied the values into pos_x, pos_y, and scale but the map is still not aligned properly. I did all the basic steps in this video. Edit: Ok so i found out it's updating my workshop map (i subscribed to my own since i forgot to backup the file when resetting my PC and had to start again by converting the file from bsp to vmf. I've since unsubscribed and deleted the workshop map but my current file is not updating properly and the minimap is far off to the left side (negative x quadrant when looking down on the map)
@@plate4204 i was scrolling comments trying to find for a fix for my issue and found this. i really wanted to be a dickhead and comment "double checked everything", I then came to the realisation i didn't remove "//" before the radar_lower and that wasted 2 hours of my life
I know this is a bit of a random question, how do you make something move in the wind in csgo sdk? I want this vent cover in my level to look like its waving back and forth due to the wind but im stuck... If anyone could reply that would be awesome :)
![[Source 1] CSGO Level Design Boot Camp - Day 9 - Texturing Your Level](http://i.ytimg.com/vi/d0vo4W8B4KQ/mqdefault.jpg)
![[Source 1] CSGO Level Design Boot Camp - Day 9 - Texturing Your Level](/img/tr.png)
![[Source 1] CSGO Level Design Boot Camp - Day 13 - Lighting Part 3, Advanced Lighting / HDR](http://i.ytimg.com/vi/XEWmdRfG0xU/mqdefault.jpg)
![[Source 1] CSGO Level Design Boot Camp - Day 21 - Finalizing and Publishing](http://i.ytimg.com/vi/DzMG8OeegmQ/mqdefault.jpg)
![[Source 1] CSGO Level Design Boot Camp - Day 14 - Doors, Ladders, and Chickens](/img/1.gif)
"hello everyone, TAPHATWAHFFEL here once again-"
Small mistake at 7:40, r_novis disables the visibility engine, not the rendering engine.
Shhh. Don't point out things I can't fix. >.
Your guide is amazing it really helped me improve my radar and keep up the good work man
2 years later and still 0 dislikes, good work!
can I use any photoshop for example gimp 2?
Hey , how is your wallpaper called? (18:42)
I have a slight problem. The radar works in game but depending on what aspect I use, (which is 16x9) the radar would shift. But if it’s 4x3 it works fine. So if I use 16x9 resolution do I need to take the radar screenshot in my native resolution?
I followed every single step, but my spectate radar doesn't work :(
I think the "_spectate.dds" isn't working anymore after panorama update.
btw, you're the best one!!! You help me A LOT! Thank you so much.
You sir, gained a subscriber.
My radar is showing on the loading screen but not in-game quadruple checked everything
Pretty sure he missed it but didn't hear what to do about the 1024x768 people. I assume its cut it down to 768x768 but from there im lost. I got my square 768x768 but if i resize it to 1024x1024 the position will be botched and misaligned
EDIT: best thing to do that i found is do the 1024x1280 and then the add your taskbar to the screenshot and then while in paint just paint it black to match the background and you can clip it to 1024x1024 that way and it works goood.
6:40 radar
thanks
hey so I followed all the instructions but my map on the radar is too small. okay so I have CT and B set in the perfect locations but when I walk over to my stairs it acts as if I am in a, which th stairs lead to a but the map on t side and a sight are scrunched it seems. HOW DO I FIX THIS.
Followed it all but the minimap is badly misaligned, it's only just visible from an outer corner of the map. The scale is roughly correct though I can't really tell due to the level of misalignment.
This works also for css?
Anyone have idea why i cant rotate the overview ? like i have the screenshot from left to right, but i want it from back to forward
:/
The nvidia plugin doesn't work? help!
Brillante.
Ok i have an issue now. I copied and pasted the overview as a comment into the text file and copied the values into pos_x, pos_y, and scale but the map is still not aligned properly. I did all the basic steps in this video.
Edit: Ok so i found out it's updating my workshop map (i subscribed to my own since i forgot to backup the file when resetting my PC and had to start again by converting the file from bsp to vmf. I've since unsubscribed and deleted the workshop map but my current file is not updating properly and the minimap is far off to the left side (negative x quadrant when looking down on the map)
Re-scale the .dds files to 1024x1024
Just make a Screenshot,crop it in paint and make it dds with Gimp 2 or something
thank you bro you are awesome
is this de_junction
when I screenshot command the console screen is blocking the map!!
just use f12
My radar doesn't work. I did literally everything right, double checked everything, and it still doesn't work. Can someone help me?
pop into discord.gg/SourceEngine and someone will be down to help you.
Thanks for the quick response but I figured it out! I just needed to add _radar at the end of my dds filename!
@@plate4204 i was scrolling comments trying to find for a fix for my issue and found this. i really wanted to be a dickhead and comment "double checked everything", I then came to the realisation i didn't remove "//" before the radar_lower and that wasted 2 hours of my life
are you Canadinan?
can i playtest de_york
no
Le Reff fucc.
What if we don't have photoshop?
Kryogen download paint.net it has what you need
don't click on the link, it Google Paint.net
detrine Alright thank you :)
Torrwnt photoshop
the download is gone
nvm it's under "tutorial content" now
I know this is a bit of a random question, how do you make something move in the wind in csgo sdk? I want this vent cover in my level to look like its waving back and forth due to the wind but im stuck... If anyone could reply that would be awesome :)
Aidan Daly you could create a custom model.
fucking insane man
triggered
First :P
leave