KAPE at KOMENTO sa mga SUBSCRIBERS

[@MamaJing]

Galing nyan napapanahon mga printer now. Keep it up

[@PinoyTechs]

thanks po 😍

[@czarcastthick7146]

More power to your channel sir.

[@PinoyTechs]

Thanks kapinoytechs sa support.

[@cabrerabert3115]

Good day sir, paano ba ayusin, iconvert at lagyan ng sublimation ink ang epson stylus SX130. thx

[@marialanieandradedacanay4450]

Bos san po opis nyo

[@vanessagorospe1994]

Hello boss.. Paano po ayosin ung canon error B200? Printer unit MG2570S

[@PinoyTechs]

good evening kapinoytechs, yung b200 na error sira na talaga yung ink cartridge. at need na palitan. if in case nag palit ka ng ink cartridge at same error pa rin. nasira na rin yung main board. not advisable to repair na. please like subscribe at hit the bell para updated tayo sa mga tutorials. thanks

[@edrivo]

Hello, sir! Yung Canon MX416 printer ko naka-CISS matagal hindi nagamit. Recently, ginamit ko pero ayaw ma-recognize yung ink cartridges. So nilinisan ko yung connector at saka yung nozzle pero nag-error message naman ng "Black/Color ink volume unknown." Please help. Salamat.

[@revilynrespondo-sumawang4404]

Hi sir baka po pwede makahingi ng payo regarding po sa ip2770 bakit po kaya pubk or violet siya pag nag print po ako... Salamat more power

[@PinoyTechs]

good evening kapinoytechs, ito yung mga ginagawa kong flow. I assume naka CISS na printer mo.
Before gawin itong steps, physical check muna, make sure naka open yung takip ng air intake ng ink tank at make sure na wala itong laman na ink para smooth ang flow ng ink going to ink cartridge.Ito nga pala yung mga steps na ginagawa ko, sana makatulong
1st nozzle check
2nd deep cleaning 5 times
3rd nozzle check uli
4th ibabad ng 1 hour sa alcohol yung tip o nozzle ng ink cartridge
5th repeat steps 2 to 3
if same pa rin
6th manual ink suction ito yung video link kung paano ruclips.net/video/qcbZseSkMf0/видео.html
7th repeat steps 2 to 3 again
if same pa rin
8th replace cartridge na
please like subscribe at hit the bell para updated tayo sa mga tutorials.thanks

[@PinoyTechs]

good evening kapinoytechs, ito yung mga ginagawa kong flow. I assume naka CISS na printer mo.
Before gawin itong steps, physical check muna, make sure naka open yung takip ng air intake ng ink tank at make sure na wala itong laman na ink para smooth ang flow ng ink going to ink cartridge.Ito nga pala yung mga steps na ginagawa ko, sana makatulong
1st nozzle check
2nd deep cleaning 5 times
3rd nozzle check uli
4th ibabad ng 1 hour sa alcohol yung tip o nozzle ng ink cartridge
5th repeat steps 2 to 3
if same pa rin
6th manual ink suction ito yung video link kung paano ruclips.net/video/qcbZseSkMf0/видео.html
7th repeat steps 2 to 3 again
if same pa rin
8th replace cartridge na
please like subscribe at hit the bell para updated tayo sa mga tutorials.thanks

[@revilynrespondo-sumawang4404]

@@PinoyTechs salamat po sir 🙏🙏 try ko po yes po ciss po salamat godbless more power po sa RUclips sana dumami pa po subscriber at viewers nio