@@usmanjaved6991 it is happen such kind of switches usually sale low quality switches in market there have other kind of flout swiches working perfect and also for long time if available near u
I am a technical person and made a similar water controller for a suction pump using a microcontroller Arduino. No moving parts are used like a mechanical float switch etc. Just used 2 stainless steel wires to sense when the water tank is full or when the motor is dry running etc. The total cost of my product is under PKR 2000.
I have also developed a similar arrangement. So instead of passing 220 volts all the way up to the float switch, I'm using 12 volts and a relay.. So that it will be much safer especially during rain and bad cable insulation just in case.
Shah Sahib you should use this system to control a relay (contactor) that will prolong your motor life and less electric usage or at least float should operate a relay . (it is technical stuff don't want to bored you with details in simple loger the distance electric travels more loss it will have) none the less this is great video with good concept.
Great job, I am also always interested in automation, already installed the same float & wifi switch in series & Fred the time scheduled. Also try to search the water sensor for so long but could not find it. I also bought Switch Automatic Booster Regulator Water Shortage Protection Level Controller, but it could not used to sense the water but use as a booster near water tank. Now I am so happy to find such sensor. I am a great fan of your videos. I am an Economist but have a great interest in electronics and gardening Your passion of utilisation of free resources and automation are of great interest. Thanks for all your useful videos. Regards Aamir from Faisalabad
Really appreciate your videos. Keep up the good work. Kindly guide how to manage working of Electric Water Geyser. It should switch on automatically around 4 in the morning and switches off at given time. I want to avoid this manual hassle everyday. Thanks
This is an outstanding solution, exactly what i was looking for. Thank you so very much, may Allah bless you, my sincere prayers for you. I am a non resident and these solutions are very useful and something that i could not figure out sitting outside of pakistan
I am residing in a township of well reputed company which more like residing abroad with a good quality life now planning to resign and move to city and afraid of challenges I've to face with lack of investment also 😢. Your many videos helpful for me . Great info bro .
What about air in the supply line we face this problem every time we have released the air manually released the air from the supply line in this setup this problem will solve??? Pls advise
Dear Owais I used to see ur Vidoes, always found informative. I want to upgrade ur knowledge! Never install the elbow of 90' in the outlet pipe from pump to overhead tank. All fitting must be installed with 45' of elbows. U can make experiment by using an amp meter and see the amperes consumed by pump with 90' and 45' and can see the difference.
Please show the wiring diagram also, block diagram gives general idea what's happening around.What should be used to monitor the continuous level measurement?. This job is an intermittent level measurement, instruments should never be exposed to direct sunlight, extra shade or cover is needed.Thanks for the nice upload.
Nice setup. But I don't think you are allowed to put a motor on the main water supply line. You need to have an underground tank and motor needs to be connected to underground tank. You should check with the water supply company in your area just to make sure.
Well done in exploring this issue and finding a brilliant way to automate it. Can you please inform us how the new taxes and unit rates has effected your bills. Thanks
Good work! another milestone in home automation, consuming energy efficiently. Good that you have used fiberglass overhead tanks which I think are better in terms of maintaining quality of water, please correct me if I'm wrong.
Sir g I am facing problems for water filling in water tank I have no any device that is going in water tank or not because after some time water is not coming from government pipe line
Great video, but I don't understand why you would want to restrict water pump based on water supply - sometimes water supply is every 2 or 3 days and the tank on the roof could run out before that. We have something similar but simpler setup at our house: 1) one float on roof water tank to detect when water goes below a certain level to turn on water machine 2) another float in ground water tank that disables power of the water goes below a certain level 3) smart switch that provides power to both floats and motor that is timed to turn off circuit during peak hours
Very good video. Well edited, planned contents, rehearsed, scripted, and very focused. May Allah give you success in spreading ease for the public. Love you❤❤❤❤
Bhai over head tank ke switch se normally control wires thin wires use karne chahy na ke 329 ke wires is ke 3 reasons hen (1) cost cum ho ge.(2)5vdc ya 12vdc supply use Karen (3)4 safety Aakhir men control relay use Karen motor ko start/stop karne ke ly.
salam bhai apnay pvc blue tank install keay hain jo not good for health at all but can be used for irrigation purpose, you supposed to use fiber glass tank
Thats great (Y). As always Quality Research and Content. Can you please kind enough to answer or research about how we use this system in case of Water Tank for water supply instead direct connection. will be very greatful
My area government water supply is not at a regular time. Sometimes morning sometimes evening. Our water pump system is manual. Can this be fixed on our system. My need is whenever water supply comes pump should start automatically and stop when when water is gone. Bcos we get water only 1 hr per day. Any suggestions
@@anjaliparmar6174 yes it should fix it. It will check every 1 hour. The only downside is if pump controller checks water at 12pm and water comes at 12:10, the motor will not know until 1pm. That’s the only issue otherwise it will work.
Very informative video. I've a question that can we use the water sensor on bore system rather than government water supply. As we live in karachi and now there is no concept of water supply by KW&SB and almost every home have boring system and rely only on it. The motor is inside water lines might called rocket pump or what, which is not visible or easily accessible. Hope you understand my query.
I want a switch or valve connected to motor pipe that shuts off motor when water supply to motor ends (tank water level low) . I don't want tank based switch.
my issue is that I want my motor pump switch to get off after exact 15 minutes each day? can you please make a video on this? what to do if I dont want to use any microcontroller?
My solution: I have placed a bigger tank back side of my home with a float valve connected to the society water supply line. The advantage is this tank remains always full with the simplest automation. No contaminated water comes into my house because water always comes when there is pressure in the line. Motor fills the top tank controlled by a level switch as he explained.
Owais bhai I have been watching your videos since the beginning, and I am huge fan of your work. You seems like a person who manage things wisely. What do you suggest for people who are struggling in Pakistan? People who are not seeing their future in Pakistan.
@@syedowaisali Thank you for replying. I am already pursing my PhD abroad. I am asking for general public. You have experience living abroad. A video on this topic will be a huge help for people who are trying to find their way.
How s your experience been with this water sensing pump controller module? I only worked a few weeks for me and has been working as always on.. Indicating water even when dry
Bhai mere ghar Shazad Pump ka 3 HP red Pump hai for bor. Local float switch liya 12 wala, tao wo jal jata hai. Meri motor k liye konsa switch best rahe jo load b utha sake 3HP Pump ka?
A question. So if there is no water coming from the supply, the motor will not work. Will it sense again if the water is there and start itself? I have another setup using that to keep the pressure in the pipes, after the water tank for the tank the bore is already working well.
@@syedowaisali but only if we have put it to one hour timer? What about if it is put on 12 hours timer. Now the water is not there for 5 minutes and the timer will check after 12 hours. So this means there wont be water for next 12 hours?
Nice video, as always. Does this system retain time or resets after power failure, if so, it may never reach the 1-hr limit to check for water availability if power keeps cycling every hour. Knowing how sensitive electronics are and how quickly they fry with power failures & surges, I'd be interested in knowing how this setup fares after one year. The level switch should be fine, it's the electronic circuitry on the motor that I am concerned about.
Great content as always. BTW Can you make a video to update us on your solar system and how it's going ? Actually I am thinking of installing a solar system at my home but I've heard that government are making ammendments in their policies and ending net metering.
Asalama a alkum. I want to connect this water saver device and liquid float switch with weight with the water tank on the roof and Shahzad 12v water pump. I am not a technical person. Can anyone tell me to connect all 3 items together
Links to buy the products I used:
Flow Sensor: bit.ly/flowsensor
Float Switch: bit.ly/floatswitch15A
WiFi Plug: bit.ly/smartpowerplug
WiFi Plug (EU): bit.ly/smartpowerplugEU
Magnetic contactor with float switch?
@@mwrao comes with the switch.
Can I get the contact details of the technician?
How's your experience with water overflow switch. In my case the switch sometimes work and sometimes it just stuck due to friction as it's mechanical
@@usmanjaved6991 it is happen such kind of switches usually sale low quality switches in market there have other kind of flout swiches working perfect and also for long time if available near u
I am a technical person and made a similar water controller for a suction pump using a microcontroller Arduino. No moving parts are used like a mechanical float switch etc. Just used 2 stainless steel wires to sense when the water tank is full or when the motor is dry running etc. The total cost of my product is under PKR 2000.
Share detail for order
Pls share details for buying
Will you share your experience in a video player. Thank you
Earthing in water
I need this microcontroller based
He's the most relevant RUclipsr for Pakistanis. Always focuses on discussing local problem and gives the best solution.
Thank you for the kind words
True MashaAllah 🎉
@@syedowaisalisir please make a video regarding electric gayser which consume low electricity
I have also developed a similar arrangement. So instead of passing 220 volts all the way up to the float switch, I'm using 12 volts and a relay.. So that it will be much safer especially during rain and bad cable insulation just in case.
Before this video, I thought of the same thing...
any other solution without passing wire all the way up
Shah Sahib you should use this system to control a relay (contactor) that will prolong your motor life and less electric usage or at least float should operate a relay . (it is technical stuff don't want to bored you with details in simple loger the distance electric travels more loss it will have)
none the less this is great video with good concept.
Perfect setup, just what I was looking for. Thank you for posting this video. ❤ from 🇮🇳
Thankx bhai such a wonderful idea which I was surcharging from last 4 months k what to do with overflow & extra usages of motor
You have no idea how long I been waiting for this video, keep up the great content ❤
Great job, I am also always interested in automation, already installed the same float & wifi switch in series & Fred the time scheduled.
Also try to search the water sensor for so long but could not find it.
I also bought Switch Automatic Booster Regulator Water Shortage Protection Level Controller, but it could not used to sense the water but use as a booster near water tank.
Now I am so happy to find such sensor.
I am a great fan of your videos.
I am an Economist but have a great interest in electronics and gardening
Your passion of utilisation of free resources and automation are of great interest.
Thanks for all your useful videos.
Regards
Aamir from Faisalabad
So happy to know my videos helped you out!!
Really appreciate your videos. Keep up the good work. Kindly guide how to manage working of Electric Water Geyser. It should switch on automatically around 4 in the morning and switches off at given time. I want to avoid this manual hassle everyday. Thanks
Thank you, you can purchase this plug, this will solve all your problems: bit.ly/smartpowerplug
Great Owais bhai, you're doing everything that I want to do in my house bss paise ane ka intezar ha
Thank you ❤️
Good upload, I was looking for such system, infact had lost hope, thanks
Sir advance congratulations for 100 thousand subscribers. In Sha Allah, Allah will grant you more success, Ameen
Excellent work & suggestions. Great idea to save energy. You always come up with great solutions.
Thank you
Oh you gonna hit 1m soon InnshaAllah
inshaAllah! with your support
This is an outstanding solution, exactly what i was looking for. Thank you so very much, may Allah bless you, my sincere prayers for you. I am a non resident and these solutions are very useful and something that i could not figure out sitting outside of pakistan
Glad this video helped you ❤️
Great video.
It will be a big help for non techies if you could recommend someone in Lahore who may install this system
Great 👍 as always owais bhai
thank you sir
Well done Mr. Owais. Thanks for this useful information.
Mashalla well update information. Jazakallah
Comprehensive Video, Very Good Presentation. Humare to Float Switch har saal kharab ho jata hai aur ye ata bhi ab itna mehnga ha.
Yeh wala try karain, it’s good quality and can take up to 15A load
I automated my home motor after watching your video. Thanks alot
Glad I could help!
MashaALLAH another great video from Owais bhai
Bhai, bijli ki wire ko pani ke pass le ke jane se dar lagta ha, except for the very moter that pumps the water.
any benign solution pls, Thanks!
I am residing in a township of well reputed company which more like residing abroad with a good quality life now planning to resign and move to city and afraid of challenges I've to face with lack of investment also 😢. Your many videos helpful for me . Great info bro .
یہ اٹومیٹک سوچ تقریبا ہم سات اٹھ سال سے یوز کر رہے ہیں یہ بہت کار امد ہے
Wonderful brother. I've been a part of your journey since Qatar. Canada kabhi chakar lagain tou zaroor milye ga.
InshaAllah zaroor
What about air in the supply line we face this problem every time we have released the air manually released the air from the supply line in this setup this problem will solve??? Pls advise
Dear Owais I used to see ur Vidoes, always found informative.
I want to upgrade ur knowledge! Never install the elbow of 90' in the outlet pipe from pump to overhead tank. All fitting must be installed with 45' of elbows.
U can make experiment by using an amp meter and see the amperes consumed by pump with 90' and 45' and can see the difference.
Interesting! Noted
I had been looking for this for a while. Thanks
Please show the wiring diagram also, block diagram gives general idea what's happening around.What should be used to monitor the continuous level measurement?.
This job is an intermittent level measurement, instruments should never be exposed to direct sunlight, extra shade or cover is needed.Thanks for the nice upload.
Nice setup. But I don't think you are allowed to put a motor on the main water supply line. You need to have an underground tank and motor needs to be connected to underground tank. You should check with the water supply company in your area just to make sure.
Sir electric scooty pr video banaye plz k leni chahye k nhi
i also been looking to automate my motor ,thanks for sharing
Well done in exploring this issue and finding a brilliant way to automate it. Can you please inform us how the new taxes and unit rates has effected your bills. Thanks
If you wanna earn 50/60 k from home using your smart phone...
Fill this form:👇🏼
bitly.ws/Vmrz
Phone se control karnay ka idea talaash kejey.❤
You can control this with your phone, check the 3rd component explained
Always next level video in Pakistan...❤
Good work! another milestone in home automation, consuming energy efficiently. Good that you have used fiberglass overhead tanks which I think are better in terms of maintaining quality of water, please correct me if I'm wrong.
Thank you for the appreciation. I’m not sure, I have to look it up!
bhai please 2023 ma AC ki recommendation krdo. Kenwood 1838s eSmart Plus ki climate Type T1 likhi hui ha ab sticker p
Sorry to say what about submersible water machine in a well or 3 inch bore
Excellent guidance provided
Sir g I am facing problems for water filling in water tank I have no any device that is going in water tank or not because after some time water is not coming from government pipe line
buht hi informative channel hai
Zabar dast sir mostly plumbers & electricians Pakistan main Allah Hafiz he hai
اُن سے کہیں میں نے یہ سسٹم لگوانا ہے تو انکو سمجھانا مشکل ہوتا ہے ۔😂😂
Sahi baat hay, acha karigar dhoondna mushkil hay Pakistan mein
Amazing
السَّلاَمُ عَلَيْكُمْ وَرَحْمَةُ اللهِ وَبَرَكَاتُهُ !
جزاك الله خيرا !
Suitable for water supply lines only not for bore
Great video, but I don't understand why you would want to restrict water pump based on water supply - sometimes water supply is every 2 or 3 days and the tank on the roof could run out before that. We have something similar but simpler setup at our house:
1) one float on roof water tank to detect when water goes below a certain level to turn on water machine
2) another float in ground water tank that disables power of the water goes below a certain level
3) smart switch that provides power to both floats and motor that is timed to turn off circuit during peak hours
Very useful and informative vlog..
how this device is connected to underground water tank or water supply line ?
Very good video. Well edited, planned contents, rehearsed, scripted, and very focused. May Allah give you success in spreading ease for the public. Love you❤❤❤❤
Great video as always
quality content. kindly share your views/experience on reliable water motors as well.
Thank you
Welldone Good job, Very Informative Video. THANK YOU VERY MUCH 👍🏻🤣
Hey. How to avoid direct contact of sun with watertank which causes the temperature of water to rise?
Awesome was looking for such a solution. Thanks❤
is there anything wireless like that?
Bhai over head tank ke switch se normally control wires thin wires use karne chahy na ke 329 ke wires is ke 3 reasons hen (1) cost cum ho ge.(2)5vdc ya 12vdc supply use Karen (3)4 safety
Aakhir men control relay use Karen motor ko start/stop karne ke ly.
Agar hmne normal 220v wala suction pump chalana hai to can we automate it using 12v control reley ?
salam bhai apnay pvc blue tank install keay hain jo not good for health at all but can be used for irrigation purpose, you supposed to use fiber glass tank
Ok
Dear sir r u still using it
And how it is working
R agr Pani Chala jae to kia HOTA a while working
Very well done, Awais bhai.
Thank you
Excellent solution
Thank you
Owais bhai thanks for the informative video really helpful
You’re welcome
Thats great (Y). As always Quality Research and Content. Can you please kind enough to answer or research about how we use this system in case of Water Tank for water supply instead direct connection. will be very greatful
My area government water supply is not at a regular time. Sometimes morning sometimes evening. Our water pump system is manual. Can this be fixed on our system. My need is whenever water supply comes pump should start automatically and stop when when water is gone. Bcos we get water only 1 hr per day. Any suggestions
@@anjaliparmar6174 yes it should fix it. It will check every 1 hour. The only downside is if pump controller checks water at 12pm and water comes at 12:10, the motor will not know until 1pm. That’s the only issue otherwise it will work.
Very informative video. I've a question that can we use the water sensor on bore system rather than government water supply. As we live in karachi and now there is no concept of water supply by KW&SB and almost every home have boring system and rely only on it. The motor is inside water lines might called rocket pump or what, which is not visible or easily accessible.
Hope you understand my query.
Yes it will work on bore also
Thanks@@syedowaisali
Great switch
Very informative video,thanks for sharing ❤
Excellent content, Owais!
Thank you
Sir is Ko normal Jo dankipump hota us per install kr sakty hy
@@eshalraza3192 jee
what if the ground tank and roof tank, both are filled with water?
Nice work as always owais put ur input about net metering govt is going to reduce the rate
How can the flow sensor, which is connected at the outlet of the pump, sense the availability of the the water from the water supply?
After motor runs for 1 minute, it waits for water to run through the sensor. if water does not come, motor is shut of...
I want a switch or valve connected to motor pipe that shuts off motor when water supply to motor ends (tank water level low) . I don't want tank based switch.
@@ExcelTimeSavers the flow sensor is exactly for that.
@syedowaisali this will have to be connected between pump and tank. Instead of between tap and pump which is used as tap operated switch.
Quality content as always ❤.
Thank you 🙌
Very Good Video Jazak allah bhai
Great Work Mashallah 👍🏻👍🏻
Request: Akk video bana de UPS per Jo AC air conditon chal sakhta ha jaise kai Market mei ajkal aisay Ac b aay hoay han DC inverter ac on UPS.
Kitne second on rhta a ye to test k Pani arha k ni
my issue is that I want my motor pump switch to get off after exact 15 minutes each day? can you please make a video on this? what to do if I dont want to use any microcontroller?
Use a WiFi plug I’ve linked
My solution: I have placed a bigger tank back side of my home with a float valve connected to the society water supply line. The advantage is this tank remains always full with the simplest automation. No contaminated water comes into my house because water always comes when there is pressure in the line. Motor fills the top tank controlled by a level switch as he explained.
buhat ala Shah G!! JazakAllah
Owais bhai I have been watching your videos since the beginning, and I am huge fan of your work.
You seems like a person who manage things wisely. What do you suggest for people who are struggling in Pakistan? People who are not seeing their future in Pakistan.
Move abroad if you can.
@@syedowaisali Thank you for replying. I am already pursing my PhD abroad. I am asking for general public. You have experience living abroad. A video on this topic will be a huge help for people who are trying to find their way.
اسلام علیکم بھائی میرے بور سے بہت زیادہ ریت اتی ہے کوئی ایسا فلٹر ہو جو میں مین موٹر پے لگا سکوں ؟؟
How s your experience been with this water sensing pump controller module? I only worked a few weeks for me and has been working as always on.. Indicating water even when dry
It is still working for me. Did you contact the company about the issue?
@@syedowaisali i would contact the supplier now
Bhai mere ghar Shazad Pump ka 3 HP red Pump hai for bor. Local float switch liya 12 wala, tao wo jal jata hai. Meri motor k liye konsa switch best rahe jo load b utha sake 3HP Pump ka?
Yeh wala 15 ampere tak utha leta hay. Best quality
@@syedowaisali ab mer motor ki ampere kase pata lage gee
Great job bro
Owais bhai can you please share the smartwatch link that you reviewed. Couldnt find the link.
It’s not in stock that’s why video is not published either
How is the living experience in bani gala?scenic, peace,security and facitlies
Good job
Thanks for sharing.
Very nice project, thanks for sharing!!❤
A question. So if there is no water coming from the supply, the motor will not work. Will it sense again if the water is there and start itself? I have another setup using that to keep the pressure in the pipes, after the water tank for the tank the bore is already working well.
Yes as explained in the video, motor will turn on after every 1 hour for 1 min to check if water has come or not
@@syedowaisali but only if we have put it to one hour timer? What about if it is put on 12 hours timer. Now the water is not there for 5 minutes and the timer will check after 12 hours. So this means there wont be water for next 12 hours?
@@bh8ti yes
Nice video, as always. Does this system retain time or resets after power failure, if so, it may never reach the 1-hr limit to check for water availability if power keeps cycling every hour. Knowing how sensitive electronics are and how quickly they fry with power failures & surges, I'd be interested in knowing how this setup fares after one year. The level switch should be fine, it's the electronic circuitry on the motor that I am concerned about.
What is the peak hour timing now a days in pakistan?
Same as before, no changes
Great Idea
As always the best thank you
Great content as always.
BTW Can you make a video to update us on your solar system and how it's going ? Actually I am thinking of installing a solar system at my home but I've heard that government are making ammendments in their policies and ending net metering.
Just quickly buy a hybrid inverter system don't wait. Prices have started going up again
Asalama a alkum. I want to connect this water saver device and liquid float switch with weight with the water tank on the roof and Shahzad 12v water pump.
I am not a technical person.
Can anyone tell me to connect all 3 items together
Can you please share or refer technician?