Here is How to TEST and FLUSH brake fluid without removing wheels/one man brake fluid change
HTML-код
- Опубликовано: 20 янв 2023
- Brake Bleeder Kit : amzn.to/3QtY5Ut
Brake Fluid Tester: amzn.to/3JGdsFo
Tool box: s.click.aliexpress.com/e/_DE3...
In this video i will show you how to test and flush brake fluid on toyota camry it will be same for models from 2015-2017 and you can apply same procedure on any car
Here is How to TEST and FLUSH brake fluid without removing wheels with one man brake fluid change
TOYOTA Camry Brake Fluid Complete Flush
Brake fluid must be changed every two or three years, because brake fluid is (Hygroscopic), means, it likes to absorb water and air moisture
and ones you have moist in brake system, the brake will be poor
its important to use same brake fluid type, im using (DOT 4) for this TOYOTA Camry 2017
🔔 Hit the bell next to Subscribe so you don't miss a video!
👨🏻💻 Watch my newest video: www.tubebuddy.com/quicknav/latest/UC2lUGn7VN0u3U_M4RSmjQHw
lets be friends
--------------------
/ alimech8
/ alimechusa
**If the video was helpful, remember to give it a "thumbs up" and subscribe and turn the notification bell on, so you dont miss any new videos
What is this? He's leaving all the air inside
There is air coming out when bleeding tire which is not a good sign. It shoudl bleed only fluid not any air. In order to prevent this, don't flush all the fluid in master cylinder just left some at the bottom and start bleeding later. But in any case, there shouldn't any air coming out while bleeding.
best demonstration on youtube about a DIY job right here! Most people want you to take off all the wheels and have fancy equipment, this kit literally costs $15 lol.
One of the best videos I've watched about changing brake fluid using the vacuum tool. The tool makes the whole process very easy. Thanks for the good job!
Very easy 👍 anyone can flush their brake fluid at home 🏡
On 2017 Camrys they have the ABS module on right front side under hood next to wiper fluid filler bottle, its always been my understanding that when any vehicle has the ABS module that the brake bleeding should start furthest from the ABS module, not from the master cylinder, therefore having a module the bleeding would begin from the left rear then right rear then left front & last the right front, if cars didn't have the ABS module as older vehicles then the bleeding would begin at R/R then L/R then R/F & last L/F, this is what is always recommended on how its to be done.
Lots of air bubbles in that line when you closed it.
No air bubbles is key
Hey,thanks for your video.Its really informative.I have a doubt,idk its a dumb question.Once we change the break fluid from the rear,and then if we start the engine.Will the break line opens and the old and new fluid mix together?Or as we removing all the fluid from the reservoir it should be all good?Response will be appreciated.
Nice tools 👍
This is the standard of DIY videos. Makes it easy to follow and I now see what I was doing wrong. Thanks!!!
by far the best and most simpliest turtorial out there. so easy to follow. am glad it can be done with wheel on!
-Thank you for the tips and the tools links
I just went out and bought the Bleeder vacuum pump, thanks for video.
Great tips and time saving tactics! So much great info! Subscribed! Thank you Very much! I will be watching your other videos as well.
Thanks for the straight forward easy video.. a lot of guys make it complicated
I got a Honda accord sport 2021 never worked on my car like this but after this video feel confident in doing it
This is so helpful. Thanks a lot. Already ordered the same flushing kit. Cheers man✌🏻😉
I love your videos keep up 👍🏻
Bro Good Video I got confidence in doing this now thanks