I seldom comment on RUclips, but I need to tell you that what you post here is super good! It is hard to find anybody who is able to do what you do! Everything you do is easy replicable, you provide clear instructions and the background information of the parts you use. This makes it easy for me to modify MY Monkey as well. Thank you Wing Lai! My best regards to Hong Kong?
Thank you for your comment and appreciation.My video can help Monkey fans to DIY it is happy to hear. I`m come from Hong Kong . Not to much monkey bike in my place. Enjoy upgrade the bike and hope my video get more helpful.
@@lai_wing I went ahead with the OilPump and Kitaco Clutch cover KIt purchased from Webike. I have a question: Where can I purchase the filter cardridge (in future)? Is it the same cardridge/filter as OEM Honda part: 15412-HB6-003? and do I need to change also the Rubber seal rings when doing a oil change? any shop in Kowloon? I will be visiting HKG in December Thank you for your advise. Krgds, Henry
@@henryh6573 Yes,the oil filter OEM part no is :15412-HB6-003.I was used the after market parts was "KN Planning product #OF-01 " bought at webike.Ideal situation each oil change to replace the rubber seal, but I will depends the seal condition and parts availability to replace. Welcome to HK. Monkey bike is not a popular style in HK.The parts of monkey always out of stock.The Most shop sell the bike accessories .Motomartco、ridersshophk、helmet King recommended visit.
@@lai_wing Thanks a lot for the information! I shall visit MotoMart to have a look. Here in NZ Top of the South Island my Z125 seems to be the only one! Not much accessories in bike stores for small bores. Thank you Wing Lai, keep your Videos coming! Take care, safe riding to you!
I seldom comment on RUclips, but I need to tell you that what you post here is super good! It is hard to find anybody who is able to do what you do! Everything you do is easy replicable, you provide clear instructions and the background information of the parts you use. This makes it easy for me to modify MY Monkey as well. Thank you Wing Lai! My best regards to Hong Kong?
Thank you for your comment and appreciation.My video can help Monkey fans to DIY it is happy to hear.
I`m come from Hong Kong .
Not to much monkey bike in my place.
Enjoy upgrade the bike and hope my video get more helpful.
@@lai_wing I went ahead with the OilPump and Kitaco Clutch cover KIt purchased from Webike. I have a question: Where can I purchase the filter cardridge (in future)? Is it the same cardridge/filter as OEM Honda part: 15412-HB6-003? and do I need to change also the Rubber seal rings when doing a oil change? any shop in Kowloon? I will be visiting HKG in December Thank you for your advise. Krgds, Henry
@@henryh6573 Yes,the oil filter OEM part no is :15412-HB6-003.I was used the after market parts was "KN Planning product #OF-01 " bought at webike.Ideal situation each oil change to replace the rubber seal, but I will depends the seal condition and parts availability to replace.
Welcome to HK.
Monkey bike is not a popular style in HK.The parts of monkey always out of stock.The Most shop sell the bike accessories .Motomartco、ridersshophk、helmet King recommended visit.
@@lai_wing Thanks a lot for the information! I shall visit MotoMart to have a look. Here in NZ Top of the South Island my Z125 seems to be the only one! Not much accessories in bike stores for small bores. Thank you Wing Lai, keep your Videos coming! Take care, safe riding to you!
I went to MotoMart! Bought me a nice Jacket...nice people, good Service and good price. Thank you for referencing it.
可以裝單向閥,裝在機油吹孔上
可以分享機車扭力板手和基本拆裝工具嗎?想自己DIY謝謝😆😆😆
我會建議:
1/2“ 扭力板手10-150Nm
1/4” 或 1/2” 8mm-22mm六角套筒 及 棘輪板手
兩用板手套裝8mm起步
六角匙一套及六匙套筒批頭
如果新入手DIY的話,不用買最頂級的工具。買整套套裝比較化算,確定自己興趣及能力之後,才升級更好!
@@lai_wing 了解謝謝你👍
師兄,阻齒器可以係邊到買到?
我是在webike 網站購買的~
16:02 想請教這個膠環的零件編號
感謝尼🙏🙏
想問下極力子威也非六角形,原廠極力子調整器無法卡住新威也,師兄點處理?
我沒理解錯誤的話,你是指機器邊的調整器,片段中我是用原裝的。
極力子威也,是依靠前後兩個絲帽對上夾實威也,固定及調較威也長度,只要有前後絲帽就能夾緊威也。
@@lai_wing係牛角嘅果邊。新威也係圓形唔係六角形,牛角果邊嘅調整器無辦法卡住新威也(圓柱形)。
@@terrylau1993 不太理解你所指的威也外殼導致的問題。片段中29:15你可以見到我牛角邊的威也也是圓形的。威也殼外管只要能頂著牛角調較螺絲及機器調節器固走長度,就能提供反作用力拉動威也工作。
@@terrylau1993 在片段30:00中,你可以見到機器調整器邊的威也也是圓形插入六角形調整螺絲中。
想問換偈油泵係咪一定要拆離心輪?
我是jb02 4速引擎款,可以不用折離心器也可以裝拆機油泵。
如果你打開引擎外蓋,順道也為油格及離心器作清潔一下吧!😃
想請教下外殼螺絲應該上幾多磅?
10Nm~😀