Negative comment from sellers? I smell envy and jealousy. Paranormal investigating and measuring/testing is not a science and therefore there isnt any specified regulated tool or system to measure or compare to determine such an incident. People like this gentleman that want to save people money from overblown prices on things that actually should be a fraction of the price due to its non necessary requirement or exactory examples proving paranormal events exist (no offense as nothing technically does) one shouldnt be hateful or act negative towards him. He comes up with some really great items for sometimes a lot cheaper price than US prices for sure. Im Canadian so Im not fronting for him because of the same nationality. I just hate ignorance. My apologies for a long rant...but it should be said. Cheers
Hey, i have a question....where do you get your wooden boxes from, specifically the on in this video? You guys make amazing stuff, have bought two things, one more on the way..keep up the amazing work guys..
@@InfrareadyLtd thanks so so much, really didn't think of that kind of search, didn't see one similar to flip top box like in this video, search will continue.. Different question.. Can you replicate a device done on RUclips? The video was 5 years ago, schematic it at the end but too blurry to make out and the website he had it on is gone. The guy who made the video is AWOL for years and its an amazing device that you guys should probably also make. Can you recreate it?
@@InfrareadyLtd Any ideas on the thermistor detector vid? if anyone can figure that out its gonna be you, im not clued up enough to work out the blurred schematic...lol
for clarity and by your wiring diagram : frequency is the number of times the pulse/voltage is high per second ( in hertz ) , duty cycle is the percentage its stays high. judging by your wiring, the first channel if you select it will send the scan up (as its connected to the right side of the pot , and if you select channel 2 it will go down as its connected to the left side . each channel has no bearing on the other so setting one channel to 60 and the other to 30 wont have any correlation as the generator is working on the channel you have selected . if you want the same scan speed going up and down just set both channels to the same settings .
Thanks Phil. I’ll try and get my head around that. Do you have an email address I can contact you on. The PWM in this instance is mimicking a pulse encoder.
@@InfrareadyLtd It's funny how you're quick to jump onto someone who can help you and you can benefit from, yet you couldn't be bothered helping others learn this stuff when they ask a question. SAD!!!
i assume if your using a reverb board then you would use the mic output on the fm board instead of the amp out shown then connect your reverb board then go to a seperate amp
Ah, so like a rotary encoder tuner module and then to auto tune you just use the PWM module? Is that right? Looks like the PWM module is called this in the states on Amazon "Digital 2 Channal PWM Square Wave Pulse Signal Generator Adjustable Frequency Duty Cycle 100% 1Hz-150KHz Module". Thanks for sharing! I've been wondering how to get a spectrum analyzer display cost effectively and then portable up into the 384kHz range. Guessing will be a more expensive TI 768kHz sampling rate TLV320ADC6120 768kHz Burr-Brown™ Audio ADC will be able to handle detection's up to 384kHz for a more real time (not certain latency) spectrum/signal analysis. The TinySA is great for MF and higher... though seems there's a gap like LF and lower for a wide frequency range portable SA. This would help rule out Acoustic Hailing devices that beam form in the LF range.
Hello, I am trying to build a different version of a ghostbox using arduino UNO, TEA5767 and a signal generator (like the one shown in your video) with a 10k POT. Any chance you could show me how to wire up that jigsaw?
Just built mind...same problem it will not sweep. Removed ground to center pin and can adjust using knob. Resoldered but will not sweep still. ???????????
I did this exact setup and mine doesn't sweep at all. Is the sweep pwm supposed to be programmed with a computer or something or do some radio modules with the frequency on the right not work?
@@InfrareadyLtd the module I have as far as the radio goes looks exactly like the one on this video. Any idea why it won't work? Do some of the right side frequency radios not work?
Sweep= digital station search; only. His box stores 25+, plays them backward or in a mix, adds a touch of reverb sound whole words between cuts can knit together, bit more static but the words are clearer as if he reduced the background.. that may pie made up in my mind but you can do it on software and he seems to ‘now what he’s doing best, then you can play am only or fm but the dial just hits station numbers to keep it random so you really should get a valid response positive if you hear anything answering your question it’ll be fast like ten seconds... if it was once a living human inside a body bu now disembodied with no vocal chords to crisp and amplify. Nice and generous fellow.
Finally a DIY ghostbox that's simple. I bought one but I wanted to build a few to learn Arduino. Thanks
Negative comment from sellers? I smell envy and jealousy. Paranormal investigating and measuring/testing is not a science and therefore there isnt any specified regulated tool or system to measure or compare to determine such an incident. People like this gentleman that want to save people money from overblown prices on things that actually should be a fraction of the price due to its non necessary requirement or exactory examples proving paranormal events exist (no offense as nothing technically does) one shouldnt be hateful or act negative towards him. He comes up with some really great items for sometimes a lot cheaper price than US prices for sure. Im Canadian so Im not fronting for him because of the same nationality. I just hate ignorance. My apologies for a long rant...but it should be said. Cheers
Thanks for taking time to comment 👍🏼
Thank you so much. That is an LCD FM radio receiver module frequency modulation board for anyone attempting to find it on EBAY.
Great thanks, at least someone is helpful. These guys aren't helpful to learners that's for sure.
Hi. I’m happy to help, just not on tap on RUclips 24/7. Best email infraready@live.co.uk
interesting thanks.
Friend, first of all, congratulations on the magnificent work. Could you sell me this equipment even without the box and send it to Brazil/São Paulo?
Hey, i have a question....where do you get your wooden boxes from, specifically the on in this video?
You guys make amazing stuff, have bought two things, one more on the way..keep up the amazing work guys..
Roy Pierce hi. Thanks for your comments. Yes, you can find the spirit of St. Louis radio boxes on eBay. Thanks
@@InfrareadyLtd thanks so so much, really didn't think of that kind of search, didn't see one similar to flip top box like in this video, search will continue..
Different question..
Can you replicate a device done on RUclips? The video was 5 years ago, schematic it at the end but too blurry to make out and the website he had it on is gone. The guy who made the video is AWOL for years and its an amazing device that you guys should probably also make. Can you recreate it?
@@InfrareadyLtd
Here is the video..
ruclips.net/video/6n-Za66PGNU/видео.html
@@InfrareadyLtd Any ideas on the thermistor detector vid? if anyone can figure that out its gonna be you, im not clued up enough to work out the blurred schematic...lol
SPECTOR Paranormal I’m on it. I’ll post up progress in the next 5 mins.
Simple but effective! :D
for clarity and by your wiring diagram :
frequency is the number of times the pulse/voltage is high per second ( in hertz ) , duty cycle is the percentage its stays high.
judging by your wiring, the first channel if you select it will send the scan up (as its connected to the right side of the pot , and if you select channel 2 it will go down as its connected to the left side . each channel has no bearing on the other so setting one channel to 60 and the other to 30 wont have any correlation as the generator is working on the channel you have selected . if you want the same scan speed going up and down just set both channels to the same settings .
Thanks Phil. I’ll try and get my head around that. Do you have an email address I can contact you on. The PWM in this instance is mimicking a pulse encoder.
@@InfrareadyLtd phildurham48@gmail.com bud
@@InfrareadyLtd It's funny how you're quick to jump onto someone who can help you and you can benefit from, yet you couldn't be bothered helping others learn this stuff when they ask a question. SAD!!!
Where would the reverb board go on this circuit andy? Preferably I'd like a clean sweep.
i assume if your using a reverb board then you would use the mic output on the fm board instead of the amp out shown then connect your reverb board then go to a seperate amp
Hi buddy I've been watching how to make your spirit box where do you get a pulse maker from 🇬🇧
Ah, so like a rotary encoder tuner module and then to auto tune you just use the PWM module? Is that right? Looks like the PWM module is called this in the states on Amazon "Digital 2 Channal PWM Square Wave Pulse Signal Generator Adjustable Frequency Duty Cycle 100% 1Hz-150KHz Module". Thanks for sharing! I've been wondering how to get a spectrum analyzer display cost effectively and then portable up into the 384kHz range. Guessing will be a more expensive TI 768kHz sampling rate TLV320ADC6120 768kHz Burr-Brown™ Audio ADC will be able to handle detection's up to 384kHz for a more real time (not certain latency) spectrum/signal analysis. The TinySA is great for MF and higher... though seems there's a gap like LF and lower for a wide frequency range portable SA. This would help rule out Acoustic Hailing devices that beam form in the LF range.
Nice spirit box
Hello, is it possible, with a square wave signal generator, to transform a Radiwow R-108 into a continuous scan?
Can you make a spirit box with a sony icfp26 portable radio and a transformer and a Bluetooth speaker??
Brad Chick sounds awesome. Do you have any further instructions?
@@InfrareadyLtd no I was just asking if it could be done that's all??
How did u cut the white noise out
It’s a clean sweep radio that steps through scanned and stored stations. It’s a design that many investigators now use.
Hey! Its possible with any another radio fm module?
Hello, I am trying to build a different version of a ghostbox using arduino UNO, TEA5767 and a signal generator (like the one shown in your video) with a 10k POT. Any chance you could show me how to wire up that jigsaw?
Just built mind...same problem it will not sweep. Removed ground to center pin and can adjust using knob. Resoldered but will not sweep still. ???????????
is this with reverb?
How much is the parts an a parts list of the item's an wire map so i can make one for fun if you can help.
i need a link to buy one of your builds : )
Infraready.co.uk
Bonjour jai un tout petit appareil jsuis sur quond doi pouvoir le fair j'aimerais vous le montrer
people that send negative are just jealous
john smith Thanks!
Where do I buy it
Hi I am looking to make analogue spirit box just need a tuner for the sweep any idea what's best to use
Tatia Paranormal I wanted to do that too
How much are the boxes please
You cal find them online at www.infraready.co.uk
I did this exact setup and mine doesn't sweep at all. Is the sweep pwm supposed to be programmed with a computer or something or do some radio modules with the frequency on the right not work?
My Paranormal Diaries that’s correct. While no programming is required, finding the right module can be tricky.
@@InfrareadyLtd the module I have as far as the radio goes looks exactly like the one on this video. Any idea why it won't work? Do some of the right side frequency radios not work?
My Paranormal Diaries all of this style module do t seem to work at the minute. Email me at Infraready@live.co.uk and I’ll explain. Thanks
@@InfrareadyLtd ok will do
Sweep= digital station search; only. His box stores 25+, plays them backward or in a mix, adds a touch of reverb sound whole words between cuts can knit together, bit more static but the words are clearer as if he reduced the background.. that may pie made up in my mind but you can do it on software and he seems to ‘now what he’s doing best, then you can play am only or fm but the dial just hits station numbers to keep it random so you really should get a valid response positive if you hear anything answering your question it’ll be fast like ten seconds... if it was once a living human inside a body bu now disembodied with no vocal chords to crisp and amplify. Nice and generous fellow.
Incidentally I have deleted FB, Twitter and Instagram, I am only available on RUclips.
Wouldn't AM be better?
Unfortunately these modules only cover FM. See our tutorial on the HRD737 that covers FM AM and SW.
@@InfrareadyLtd You can modify an FM radio to do AM.
Tips & Tricksss are you sure that can be done?