0:15 DIY Computer Case Mini ITX 0:28 Materials & Equipment 0:34 Aluminum Profile 20x20mm, Lenght 35cm, 4 pieces. 0:40 Aluminum profile 20x20mm, Lenght 18.5cm, 4 Pieces. 0:47 Aluminum profile 20x20mm, Lenght 14.5cm, 4 pieces. 0:54 Blind bracket 20mm, quantity 8 pieces. 1:18 m5 t20 aluminum profile nut. 1:35 Let's start assembling. 1:48 Assemble 2 sets like this. 2:48 Assemble 18.5cm aluminum pieces. 3:15 Put all together. 3:35 Check and align all corners. 4:04 Installing PSU. 4:10 PSU angled plates are made of aluminum. Cutted, punched and formed as needed. 5:30 Check the distances till satisfied. 5:49 Installing Mainboard (Motherboard). 5:54 Parts & Equipment (Up & down right: Aluminum slotted & cutted the required size) (Down left: Brass Motherboard Nut & 3mm female nut) 6:05 Find the right position to place the board and install all the pieces. 6:41 At first, install only 2 board brackets. 7:32 Allocate the 2 remaining mounting board bracket. 8:01 Put the middle beam to install one of the board bracket below. 8:59 Installing the plate for video card riser. 9:05 Riser cable 30cm long. Aluminum slotted cut to desired size. 9:56 Install the video card mounting bracket. 10:22 Setting up key pieces. On/Off switch, AC power socket & USB extender. 10:30 Equipment to use. 12:26 Wiring to connect internal devices. 13:55 Installing HDD 14:03 Aluminum cut, angled and punched according the desired size. 15:55 Thank you all for your interest and attention to this footage. 16:04 If you think that it's useful and interesting, please press LIKE & Share for encouragement the preparation the next time. 16:13 Thank you
Love your build! And also, some people here can't appreciate kevin macleod's ragtime huh. I don't know why you use that music, but I'm glad you use it!
great build i was thinking of this in my head because the N1 cases are so hard to get and expensive can you put list of parts in the description in English please thanks in advance
I would suggest that next time you do this that the motherboard is grounded while you are adding the brackets... ESD is still an issues with processors and motherboards...
change the music, the music is funny music.. for a serious project.. also i would like to see the closed panel video for the same.. how does it look after you close it ..
i enjoyed watching that but the music was extremely repetitive and the beat never changed I felt like I was stuck in the twilight zone! but modular PC's like this should be more popular. nice built id love to get some more information or links to parts to build my own!
0:34 - 04 bars 20x20mm with 35cm 0:45 - 04 bars 20x20mm with 18.5cm 0:48 - 04 bars 20x20mm with 14.5cm 0:54 - 15 blind blackets 20mm (L type blacket or L type joint) 1:21 - 09 m5 t20 ps_1: don't forget the bolts ps_2: sorry english isn't my first language and some of those items have a different name in my country.
ikr? never noticed how annoying this tune is until it's played back on end, overtop sounds I'm actually trying to hear.. completely out of place since it's no funny video and an otherwise pretty good one at that. shame
yeah a hard drive will be totally fine in a vertical position! the tolerances are so tight that gravity doesn’t actually really change anything very much, plus the disk is even so you should be all good! and your english was totally understandable! if you want to sound more natural, you might say something like “is it safe for a hard disk to be in a vertical position?”
Germano estou pensando em fazer um pra mim. Encontrei esse site que vende essas barras aqui no Br loja.forsetisolucoes.com.br/15x15 bem em conta se usar a 15x15, só aumentar uns Cm na altura pra caber a sua placa. A minha é uma MSI B350M Pro-VH Plus, tem 23,6cm de altura mais ou menos (4 barras de 24cm no lugar das 18,5cm como é aqui, ajusta pra altura da sua placa e acho que resolve!).
@@juliofrancatv eu também trocaria a posição da fonte e placa mãe, pq cabos rise e cooler low profile são meio caros. Eu provavelmente colocaria a fonte virada pra frentecom o fan virado pra fora, da mesma forma que fica no pichau hx100. Assim dá pra enfiar um Air Cooler.
Would it be possible to put a build like this into a carry on suitcase for a short plane ride? I work a fly in fly out job and I want to take my desktop PC back and forth with me. While in transit, I intend to remove the GPU and put it into a separate padded box. PS I would greatly appreciate if you check out my open air PC build video on my channel and provide any HONEST feedback. Subscribe if you enjoy :)
0:15 DIY Computer Case Mini ITX
0:28 Materials & Equipment
0:34 Aluminum Profile 20x20mm, Lenght 35cm, 4 pieces.
0:40 Aluminum profile 20x20mm, Lenght 18.5cm, 4 Pieces.
0:47 Aluminum profile 20x20mm, Lenght 14.5cm, 4 pieces.
0:54 Blind bracket 20mm, quantity 8 pieces.
1:18 m5 t20 aluminum profile nut.
1:35 Let's start assembling.
1:48 Assemble 2 sets like this.
2:48 Assemble 18.5cm aluminum pieces.
3:15 Put all together.
3:35 Check and align all corners.
4:04 Installing PSU.
4:10 PSU angled plates are made of aluminum. Cutted, punched and formed as needed.
5:30 Check the distances till satisfied.
5:49 Installing Mainboard (Motherboard).
5:54 Parts & Equipment
(Up & down right: Aluminum slotted & cutted the required size)
(Down left: Brass Motherboard Nut & 3mm female nut)
6:05 Find the right position to place the board and install all the pieces.
6:41 At first, install only 2 board brackets.
7:32 Allocate the 2 remaining mounting board bracket.
8:01 Put the middle beam to install one of the board bracket below.
8:59 Installing the plate for video card riser.
9:05 Riser cable 30cm long. Aluminum slotted cut to desired size.
9:56 Install the video card mounting bracket.
10:22 Setting up key pieces. On/Off switch, AC power socket & USB extender.
10:30 Equipment to use.
12:26 Wiring to connect internal devices.
13:55 Installing HDD
14:03 Aluminum cut, angled and punched according the desired size.
15:55 Thank you all for your interest and attention to this footage.
16:04 If you think that it's useful and interesting, please press LIKE & Share for encouragement the preparation the next time.
16:13 Thank you
i don´t know you but i love you
this should be on top
please, never use this song again.. my brain is dead. great build tbh.
Wtf dude. Song is an absolute banger
NEVER PLEASE!
Love your build! And also, some people here can't appreciate kevin macleod's ragtime huh. I don't know why you use that music, but I'm glad you use it!
Finally some mini ITX build with and ATX PSU. All mini ITX cases use a SFX PSU (even Flex ATX) or they are not small at all
great build i was thinking of this in my head because the N1 cases are so hard to get and expensive can you put list of parts in the description in English please thanks in advance
I ask your mail
@@kai41071 opuhovskiy@gmail.com
@@kai41071 denisbcs85@gmail.com
So impressive!! Thanks for sharing the great work. From Japan.
Very nice build. The only thing that i suggest change is the music from video. Would be more harmonic to use the music from final video.
can you write it in english with a list? all part component?
1. bolt ..
2. ...?
Thank's You ,this is very inspiring
How did you make all the brackets too mount the motherboard and everything too the frame?
the best part is watch this video without audio.
fr
Naw mannn. The best part is the audio mannn. (Pc build still good tho)
itssss ragtime baybeeee
Amazing Build ... You got a person to follow you !!! Please share the dimensions of all parts (sheet metal parts).
nice job. The only dubt is about some missing ground poins on the motherboard ...
That classic music gives me charlie chaplin vibes 😂
do you have any documents or list of the pieces for this build. Nice work btw
Sorry i don't have
i like it solid structure NICE VIDEO
Muy buen trabajo, felicidades. Saludos desde Argentina
interesting design. with very little modification, it will fit cheap DTX motherboard (19x17cm).
Wow, nicework.
I just want to know where to buy the stick connector. What is the name?
v slot rail connector i reckon
The Music is Crap! The Video is awesome!
Please create more unique style of computer case. I really like it.
wonderful video, great job, it made my day !
I would suggest that next time you do this that the motherboard is grounded while you are adding the brackets... ESD is still an issues with processors and motherboards...
change the music, the music is funny music.. for a serious project..
also i would like to see the closed panel video for the same..
how does it look after you close it ..
Really loved your handwork
this is way far better then company cases
หาแหวนพลาสติครองมันหน่อยก็ดีนะครับกันไฟรั่ว
What is the box tube/chanel product called
aluminium profile
Just me or back of the main power socket is unprotected? Picturing someone get shock if not paying attention to that area D:
Why isn't the PSU grounded?
i enjoyed watching that but the music was extremely repetitive and the beat never changed I felt like I was stuck in the twilight zone! but modular PC's like this should be more popular. nice built id love to get some more information or links to parts to build my own!
You should add magnetic mesh on all sides
Hello nice job .Can you give us the list and dimension of all part
que hermosa computadora
What size psu have you used ?
Congratulations, excelent work
Thank you
nice work
parts list in the description would have been nice.
except for the frame and the T nuts, all the brackets were custom shaped with custom holes
สาย ac ที่เสียบจาก psu ไปหลังเคสเขาเรียกว่าอะไรหรอครับ
เอ่อเรียกว่า iec 320 c13 to 14 ใน lazada shopee มีขายครับ
สุดยอดเลยคับ
ขอบคุณครับ
Well done Bro!
very eager to see the side panel and final looks of case with it. ...
there isnt
Great work. What do you call those aluminum sticks?
Aluminium Profile
สายไฟ สวิท ปิด-เปิด ต่อ อย่างไรครับ ผมต่อแล้วเปิดได้ 10 วิ แล้วดับตลอดเลยครับ
สวิทซซื้อมาผิดแบบรึเปล่าครับ มันต้องกดติดปล่อยดับนะครับเท่าที่ฟังตามเล่ามาน่าจะกดติดปล่อยก็ติดคือไม่จากอะครับ
cool style pc
Неплохо получилось, но я бы крепление видеокарты переделал, выходит за пределы корпуса.
@@andrewe4240 причём здесь цена, там вариантов море, тем более она на шлейфах, можно как угодно сдвинуть.
@@andrewe4240 на АлиЭкспрессе намного дешевле профиль. А подобный корпус готовый стоит 4К
please add English subtitle
nice build but tu could have used thinner beams LOL
Availability..
also the t-brackets make it basically modular to fit any components inside. could be an advantage
@@slaveNo-4028 u can add t brackets on thinner beams too....
it fit full size psu and hdd its perfect
brother can you provide dimensions in english please 🙏
Build list please
what is the mainboard size with your source size
since it's mini itx i guess 17x17 cm
My motherboard is 450 gaming itx/ac
itx mobo size is 17x17
Yes it's the sizeb17x17 @@REVIEWLANDCOM
hi.. can you please provide us with english sub title. thx
GOOD JOB👍
Amazing!
Beautiful
850W is huge overkill. 500W is sufficient for most of computers. I run an i5 11400 and RTX 3060 on a 500W corsair.
Nice craftmanship but this hurt my OCD XD
What are the dimensions??
Total length of the gpu?
อลูมิเนียม จับพาวเวอร์ซัพพลาย ทำยังไงครับ หาจากไหน
ใช้อลูมิเนียมฉาก 1 นิ้วมาตัดซอย ขอซื้อเศษเหลือจากร้านทำมุ้งลวดได้ครับ
Good Job man. What about mineral oil test (adding glass to the edges) ?
what is mineral oil test ?
@@johnyboy6321 try search the computer underwater keyword..
the water was mineral oil..
and thats looks awesome, like u have pc inside aquarium..
Awesome Video
สวย
Nice!
can you write paper win english about size , please
0:34 - 04 bars 20x20mm with 35cm
0:45 - 04 bars 20x20mm with 18.5cm
0:48 - 04 bars 20x20mm with 14.5cm
0:54 - 15 blind blackets 20mm (L type blacket or L type joint)
1:21 - 09 m5 t20
ps_1: don't forget the bolts
ps_2: sorry english isn't my first language and some of those items have a different name in my country.
What kind of metal bars are those bro?
Looks like MakerBeam
Aluminum
@@kai41071 thank you so much bro. Can u give me the name of the rest of the parts in english via email?
kai4107@hotmail.com
@@kai41071 just sent you an email bro. Love your work 💜
the music hurt my ears. shet
ikr? never noticed how annoying this tune is until it's played back on end, overtop sounds I'm actually trying to hear.. completely out of place since it's no funny video and an otherwise pretty good one at that. shame
ASK: harddisk on vertical position is it safe? (sorry for my english)
it is
yeah a hard drive will be totally fine in a vertical position! the tolerances are so tight that gravity doesn’t actually really change anything very much, plus the disk is even so you should be all good!
and your english was totally understandable! if you want to sound more natural, you might say something like “is it safe for a hard disk to be in a vertical position?”
พังง่ายระบายความร้อนไม่ดีไม่มีช่องระบายลม
พังอะไรสมัยก่อนเล่นกัน 90-100c ยังไม่เห็นพังเลย. ผิด พรบ คอมอีกแน่ๆ
เปิดให้ลมเข้าขนาดนั้นอยู่ในห้องเเอร์ก็เย็นเเล้วครับไม่ต้องห่วงจะพังมันจะพังยังไงครับท่ามันร้อนเกินคอมมันก็ตัดไฟเองเเหละครับเคอมสมัยนี้ไม่เหมือนสมัยก่อนละนะ
cool!
there was no point of ac extender but nice work
อุปกรณ์ ซื้อที่ไหนบ้างครับ ร้านอุปกรณ์การช่าง มีขายไหม
www.dojogarden.com/index.php
ทำขายไหมคับ สนใจ
ไม่ได้ทำขายครับ
Super.
Excellent my friend greetings from Brazil. Could do some with micro atx board?
I think it can be done, but it will get bigger.
If I have time, I will try to do it once.
You can do it.
Germano estou pensando em fazer um pra mim. Encontrei esse site que vende essas barras aqui no Br loja.forsetisolucoes.com.br/15x15 bem em conta se usar a 15x15, só aumentar uns Cm na altura pra caber a sua placa. A minha é uma MSI B350M Pro-VH Plus, tem 23,6cm de altura mais ou menos (4 barras de 24cm no lugar das 18,5cm como é aqui, ajusta pra altura da sua placa e acho que resolve!).
@@juliofrancatv eu também trocaria a posição da fonte e placa mãe, pq cabos rise e cooler low profile são meio caros. Eu provavelmente colocaria a fonte virada pra frentecom o fan virado pra fora, da mesma forma que fica no pichau hx100.
Assim dá pra enfiar um Air Cooler.
Would it be possible to put a build like this into a carry on suitcase for a short plane ride? I work a fly in fly out job and I want to take my desktop PC back and forth with me. While in transit, I intend to remove the GPU and put it into a separate padded box.
PS I would greatly appreciate if you check out my open air PC build video on my channel and provide any HONEST feedback. Subscribe if you enjoy :)
Super cool
แนะนำผมได้ไหมครับพี่ พอดีอยากจะทำบ้างอะครับ แบบของพี่เลย แต่ว่าผมไม่อยากเปลี่ยนบอดเป็น mini itxอะครับ อยากใช้บอดเก่าMicro-ATX รบกวนให้คำแนะนำผมได้ไหมครับ ว่าต้องซื้ออลูมิเนียมขนาดไหน ซื้ออะไรเพิ่มบ้าง รบกวนที่นะครับ หรือถ้ามีเฟสบุคจะดีมากเลยครับ ผมจะได้ทักส่วนตัวเลย ขอบคุณอีกครั้งครับ
Kai Thakoengphon fb ครับรูปโปรไฟล์ ผมยืนเล่นกล้อง
What the name of that chasis?? & How thic is it?? 10mm or 15mm or 20mm?
Its name is aluminum profile.10mm or 15mm or 20mm .It's the length.
maybe 15mm judging by the look xD
ขายึดpsu เมนบอร์ด การ์ดจอ หามาจากไหนครับ
เสิสในlazada ว่าน็อตยึดเมนบอร์ดครับ
Baguuuusss
Most of these pc case build video are kinda weak man,i don't get why there isn't a build that isn't confusing on cable management
And probably cost twice as much as a solid built commercial case.
Awesome
❤️❤️❤️❤️❤️
Nc video bruh, but i cant understand the language 😭
bisakah saya memesan
this thing must be very heavy..
what ? its aluminium very light stuff
@@IVAN_ENT no bro its heavy cuz PSU and mb
@@najibs7181 roughly its 10 to 12 kg including gpu, mb, psu, case, fans, etc..
In english please...
ขอลิ้งซื้อทีครับ
HDD disk should lay flat ,position seen on video slowly kills him
it's ok, a lot of servers/workstations have hdd in the vertical position.. what you CANT do is to let it tilted
❤️
The easy-burglar-pc video. Build lacks for the io shield panel.
ITX board only need 4 standoffs
set นีั้เท่าไรฮ่ะ
หมายถึงเคสใช่ไหมครับ ถ้าใช่ไม่ได้ทำขายครับ
@@kai41071 ครับผมมมม ตู้ปลาแบบผม ไม่ไหว ต่อการย้ายปล่อย T_T
Goffi N เคสที่ผมทำข้อดีคือสามารถขยายเพิ่มขนาดตามต้องการ ที่หยากได้ครับ ตอบโจทย์ว่างั้น
แต่ไม่แพงนะครับเฉพาะเฟรมอลูมิเนียม หลักร้อยครับ
ทำขายไหมครับ ATX
เอาเป็นว่าถ้ามีรีวิว atx ค่อยว่ากันอีกทีครับ
Show 🥰🥰🥰
พีมี ฝีมือ ทำขายเถอะครับ
ทิ่ง fb ให้ผม จะจ้าง ทำ
ช่วงนี้ไม่ค่อยมีเวลาทำเลยครับ Kai thakoengphon fb ครับ
@@kai41071 แถวบ้านผม หา ของแบบในคลิปไม่ได้ครับ ออนไลน มีขายไหม
@@MSe2017 www.dojogarden.com/index.php ส่วนอลูมิเนียมฉากก็หาเศษขอซื้อเอาตามร้านมุ้งลวดครับ
5+ 🤘😑
อลูมิเนียมโปรไฟล์ และอุปกรณ์ หาซื้อได้ที่ lazada และ
www.dojogarden.com/index.php
งบเท่าไรครับ
เฉพาะเคส ไม่มีอุปกรณ์ อื่นๆ ไม่ถึงพัน
ทางผมไม่ได้รับทำครับ
ออครับ
พอดีผมสั่งเจ้าตัวนี้มา jonsbo c2
ครับก็โอนะครับตัวนี้
No! No! NOOOOOOOOOOOO !!!!!! you need power supluy TFX form factor, rtx 4060 low profile , why WHY ATX power suplyu, WHY full video card ?! oh my god
are u crayz man if he had a money for sfx psu or rtx 4060 u think he try make hes own case wtf is wrong with this ppl
@@LETVL just ignore him. he just want attention. this video was make 4 year ago. and 4060 LP launched 1 year ago
because he can. can you?