Nice to see one of these actually in action and not just some dumbass talking about it from a sales point of view and that was some pretty badass driving 😎
@@lukasolsen2016 Any rubbing issues? What size offset rims are you running? I’m looking at going to possibly 29 inch tires but wanted to make sure that they don’t rub.
@@agliem1 Mine does not rub anymore but, I have a 3" lift and the 1 1/2" forward offset a-arms. I would need to measure the wheel spacer thickness if you want. The machine is now 53-54" wide and has some steep axle angles and shortens the life of the axles. It is also harder to steer the bigger tires so I upgraded the tie rods to handle the stress. Now the week point is the steering rack FYI... Everything is a trade-off I have found.
Thanks for getting back. I have two inch wheel spacers now and running at 27x9-12 tire. I don’t want to modify anything else other then maybe go with a 4-3 offset wheel which should give me the same width without running spacers. I’ll probably go with a 28x10-14 tire then which I think would work perfect and nut rub. Again, thank you for getting back and stay safe!!
Nice to see one of these actually in action and not just some dumbass talking about it from a sales point of view and that was some pretty badass driving 😎
Spring for the 60 bucks so it takes the watermark off LOL
@Lukas Olsen what rock sliders are those
Trail Armor it is part of the skid plate that is made out of 1/2" UHMU. They are amazing skid plates.
Impressive!!, what year is your machine? Front Dif. lock?
2018 Can Am Maverick Trail 1000. Stock visco loc, but lots of stuff done to it.
@@lukasolsen2016 Hey man, thing does very well considering it has "VISCO OCK"! My Maverick Sport XRC has "SMART LOCK", and it is AWESOME!!
What rock sliders you have?
Trail armor 1/2" thick uhmw full skid plate with rock sliders. This set-up works awesome!!!
Hey, what size tire and wheel package are you running?
30" tires 14" rims
@@lukasolsen2016 Any rubbing issues? What size offset rims are you running? I’m looking at going to possibly 29 inch tires but wanted to make sure that they don’t rub.
@@agliem1 Mine does not rub anymore but, I have a 3" lift and the 1 1/2" forward offset a-arms. I would need to measure the wheel spacer thickness if you want. The machine is now 53-54" wide and has some steep axle angles and shortens the life of the axles. It is also harder to steer the bigger tires so I upgraded the tie rods to handle the stress. Now the week point is the steering rack FYI... Everything is a trade-off I have found.
Thanks for getting back. I have two inch wheel spacers now and running at 27x9-12 tire. I don’t want to modify anything else other then maybe go with a 4-3 offset wheel which should give me the same width without running spacers. I’ll probably go with a 28x10-14 tire then which I think would work perfect and nut rub. Again, thank you for getting back and stay safe!!
Impressive