DeWalt Comparison Part 2 - Impact Wrench vs Impact Driver vs Drill vs Screwdriver!
HTML-код
- Опубликовано: 30 июн 2024
- Which is the best Dewalt tool for driving lag bolts? We find out here where we compare sixteen different models of impact wrenches, impact drivers, drills, and screwdrives in Dewalts 12v, 20v, and 60v lineups all against each other. A one of a kind showdown on all of youtube.
Here are links to almost all the current models of these twisty tools:
DeWalt DCF850b - amzn.to/3ZdmlNS
DeWalt DCF845b - amzn.to/3NT497U
DeWalt DCD887b - amzn.to/3LgWija
DeWalt DCF801b - amzn.to/3LnuIRg
DeWalt DCF601b - amzn.to/3Hewl1c
DeWalt DCF923b - amzn.to/41Z48EX
DeWalt DCF921b - amzn.to/3tQYLuW
DeWalt DCK221F2 - amzn.to/3HndX64
DeWalt DCD708b - amzn.to/41ZTkGY
DeWalt DCD800b - amzn.to/41Vsuj8
DeWalt DCF891b - amzn.to/4aYbzAG (new version of 894)
DeWalt DCD999b - amzn.to/3ShtECc (new version of 996)
DeWalt DCD130b - amzn.to/3HgcgYg
As an Amazon Associate I earn from qualifying purchases.
Other reviews we have done on these tools:
DCF845 vs DCF850 vs DCF887 Impact Drivers: • Top Dewalt Impact Driv...
DCF923 Compact Impact Wrench: • DeWalt DCF923 20v 3/8"...
DCD708 Atomic Drill: • DeWalt DCD708 20v 1/2"...
#dewalt #tools #tool #impact #drill #impactdriver #impactwrench
Join us on social media:
Instagram: / someguygarage
Twitter: / someguygarage
Facebook: / someguysgarage
TikTok: / someguygarage 
Наука
![WHAT's the DIFFERENCE? Impact Driver or Impact Wrench [EXPLAINED]](http://i.ytimg.com/vi/AlQ3WHFlju8/mqdefault.jpg)
Sick comparison!!! Keep up the good KING NERD content!!!
LoL thanks!
I never thought about using the mixing drill to drive bolts, I would love to see a video with a big whole saw on it
I can do that, will add it to the list...I haven't actually done a full video on the mixing drill yet.
I use mine to do 6" hole saws pretty regularly. It's nice because its 600 RPM or whatever max speed is a perfect speed for a hole saw that size.
Massive SDS drills are also fun for driving in lag bolts. Ran 30 cm ones into concrete ( pre drilled) like it was nothing. Down side is if they get caught in the concrete they still want to spin you around 😅
@@freedomofmotionhaven't tried an SDS for driving lags, I have a decent size SDS Plus one...but luckily it does have a clutch if it binds.
@@SomeGuysGarage Mines cheap so no fancy features 😁
Wow, informative and thorough. Thanks!
Really puts them all into perspective eh?
Another great and informative video. I’m considering adding a 3/8” impact to my tool collection. Sometimes my 899 is just way too much on lighter jobs. Thanks for the great comparisons!
Highly recommend the DCF923...it and before it, my 890, are some of my most used tools for small automotive jobs. The 923 can even remove lug nuts if need be, it doesn't per say like it, but it can do it no problem.
Thanks for watching as always mrbreeze :)
Do you have a preference between pin or hog ring for socket retention? I’m finding myself with 921 vs 923 analysis paralysis! Thoughts?
@@mrbreeze5556 hog ring 100% of the time. The only time to get pin is if you're leaving a specific socket/extension always attached like you would in an assembly line use case. Hog ring is far easier for most use where you're often switching sockets.
@@mrbreeze5556 oh, also, 921 is the 1/2" drive and 923 is the 3/8" drive. I prefer 3/8" for this size tool because it's slightly more compact (the sockets themselves) and the socket sizes available in 3/8" drive line up better with the torque capabilities of a compact impact. That said, a lot of people don't have a full 3/8" impact socket set, so the 921 is nice because you can re-use other 1/2" impact sockets you might already have.
800 / 887 combo is the king overall. Are you surprised that you drove those bolts faster with a 800 under 2 seconds than those impacts? I don't know why people use impacts for serial screwing if you have hundreds of screws one after another! Right tool for the right job always!
800/845 would be my recommendation...the 845 feels smoother than my old 887's lol but I have lots of options (see other vid on just impact drivers I did)
As for impact driver vs drill for driving lots of screws, the impact is easier to control, one handed over your head while holding something else is where they shine...no twisting out of your hand, no stripping heads.
As you said though, right tool for the right job :)
Have the DCD805 and it's has lots of power
Yup, basically the same as the 800 but with the hammer drill function, solid choice!
Hi , could you recommend me dcd795 s1GB 18v tool. ?
It's not a model we have in north america, so not something I can test. However, looking at the specs it seems ok, would sit somewhere a bit behind the DCD996 in this video.
No 840?
Still looking for one on a good deal, it's on the list though!
Just picked up an 840...testing pending :) initial impressions - they used a photocopier to make these things.
@SomeGuysGarage I have had one since it came out. I use it everyday and no problems yet.
Use a power stack battery
The 1.7ah PS is pretty similar to the 5ah XR packs...I don't have any 5ah powerstacks. Either way though, it wouldn't have changed the test results.
12 volt drills would finish the job if they were in first gear tho
The screwdrivers don't have a first gear...the drills probably would come close yeah, just would have been a long video testing all the tools in all their different modes - but if there's enough interest, I'd be happy to do it!
Cool video!
P.s. you have a problem.
;-)
lol I know eh? :D
I've since added an 840 and 891 to my collection (vids coming soon) so the problem keeps getting worse haha
👏👏👏👏👏
Thank you :)
Go dewalt
LoL ya, kinda a clear winner here ;) I wish I had enough other brands to do the same thing with them.
805 🥱☠️
Same as the 800 basically but with a hammer drill function...I usually use an SDS drill rather than hammer drill, so I prefer the slightly smaller/lighter non-hammer models.