Это один из лучших роликов по приспособлениям! Осталось переложить на реноватор, там тоже явно не хватает обвесов, и даже Fein с Festool такого не делают, а хотя могли бы!
Like the self centering + slot idea. Simple and convenient. Try acrylic cement. It cures quickly, strong and usually doenst show the joints as the glue does.
You have a lot of talent my friend. I am amased how your ideas comes to life. It's really pleasure wachiing your YT channel. Only regret is that you do not provide any plans. Your sanding station would be the must in my small shop. Best regards and keep on great work. 😉
2:30 If you want those two holes exactly the same distance from the center, don't move the stop block and the spacer to the other side, just flip the workpiece. Minimize margin for error ☺️
The first hack you did is great. To prevent the movement of stopper, thats one of my problem in trimmer, while doing a grove im not aware the stopper cage moved, reulted to bring the rrouter bit longer and damaged my piece.
Okay SUPER COOL!!! And I learned another cool trick in there when he used it as a plunge router at one point by pushing down and locking the collar afterwards. (I never thought of that.🤦♂) And then to see that drawer organizer with all that cool hardware in it! Where does he find all this stuff?
Es wäre nicht schlecht wenn du in der Zukunft immer die Maße erwähnen würdest ( Zum Beispiel wie stark die Plexiglas Platte ist )und wenn du auch mal deine Werkzeug verlinkst oder Zeigst welche Hersteller du benutzt (Zum Beispiel deine Bandsäge würde mich interessieren) Danke 👍
I’m new to RUclips can you tell me please how I get the drawing to make this jig I’m a new hobbyist & want to try routering in the summer Ho great video Thanks
Que jigs interessantes você construiu e muito úteis para várias finalidades. Vou tentar aproveitar algumas dessas suas idéias para tentar aprimorar mais meus trabalhos com tupia. Obrigado por compartilhar seu trabalho cononsco. Parabéns. Abraços do Brasil.
The great thing with these trim routers is that you can buy spare body clamp bases so each jig has its own and it's easy to just move the motor from one to another. I've bought these and the cycle clamps from Temu. 👍
Bonjour Les indications des mesures sont très utiles, alors les mots à profusion ne le sont pas. J'adore ce genre de vidéos où l' élémentaire est mis en avant. 👍
Questioning "Hack #1": Why add a bumper for that one round over bit if you have to move the bumper for any other bit or remove the bumper anytime you place the router in it's plunge base? Is your router base too loose?
This is to adjust the height of the bit with the bumper in advance. Even if the height of the bit is changed during work, it can quickly and reliably return to the final height.
Love #1. Gave my Bosh palm router away years ago because the base would not hold the router depth correctly. Then again, can't complain about my Makita palm router.
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Tolles Zubehör für die Makita. Der Stopp wird demnächst gebaut.
Danke Rudi
iIDEES MAGNIFIQUES. TRES INVENTIF. EXCELLENT TRAVAIL. BELLES PRISES DE VUES .FELICITATIONS
C'EST UN REGAL DE VOIR VOTRE TUTO 👍👍👍👍👍
Vous etes une mine de connaissances pour nous , pauvres bricoleurs. Merci a vous
Thank you so much for this video, this is an excellent video on How To Do, much appreciated. :)
You are genius. Thank you 🙏 for this amazing video. God bless you.
Молодец! Придумал и изготовил нужные, удобные приспособления! Как бы ещё это самому суметь повторить!😂
This guy is a genius!
great work....as soon as my workplace is fully equipped, i will build something like this too
Great job
Thanks from ALGERIA
I usually can't stand videos with no narration, however you did an amazing job "narrating" visually 😁. Nicely done!
The discovery of the band saw rotating guide is wonderful!
Moderation, safety, and high efficiency can be expected.
I like this router very much and thanks a lot for this video
These are the sort of jigs and hints that you make and learn ... then go find things to make in order to use them ... excellent selection 👍
Brilliant set of hints & utilities, thank you
Это один из лучших роликов по приспособлениям!
Осталось переложить на реноватор, там тоже явно не хватает обвесов, и даже Fein с Festool такого не делают, а хотя могли бы!
Я вам завидую. Моя мечта сделать такую же мастерскую, чтоб заниматься с деревом и старыми инструментами.❤❤❤❤ ваше хобби.
Medidas porfavor, gracias.
Thank you for all the tips and ideas, I will try them in my workshop.
Well done, craftsman. What type of Makita router are you using in this video? Also, how thick is the acrylic in your build?
It is a rechargeable normal Makita router. The thickness of the acrylic is 6mm. Thanks
What a great collection of jigs for the router.
Great job, thanks.
Большое спасиб, нет слов проста фантастика.
Слов действительно нет...Он что,немой?
Like the self centering + slot idea. Simple and convenient.
Try acrylic cement. It cures quickly, strong and usually doenst show the joints as the glue does.
😊😊😊😊😊😊😊😊😊😊😊
You have a lot of talent my friend. I am amased how your ideas comes to life. It's really pleasure wachiing your YT channel. Only regret is that you do not provide any plans. Your sanding station would be the must in my small shop. Best regards and keep on great work. 😉
2:30 If you want those two holes exactly the same distance from the center, don't move the stop block and the spacer to the other side, just flip the workpiece.
Minimize margin for error ☺️
Thank you very much for these interesting hacks...
Many very good ideas and builds. Thank you
Great hacks! Thank you.
Is the 6t acrylic sheet the same as 6mm or 1/4 inch thickness?
6mm Thanks.
Fabuloso, la mejor que he visto 👏👏👏
очень нужные инструменты. спасибо Мастер!
Great attachments! 👍
Tks.from Miami Fl USA
Great build it’s the perfect accessory for a router
Very good Takkie 👌👌
The first hack you did is great. To prevent the movement of stopper, thats one of my problem in trimmer, while doing a grove im not aware the stopper cage moved, reulted to bring the rrouter bit longer and damaged my piece.
👍best I've ever seen!👍
Vraiment bluffant 👍👍👍
Great video and awesome tips
Awesome video! Thank you for sharing your knowledge.
What bike seat clamp did you use? Name/source?
This is a normal QR clamp. It is made in China and I purchased it from Ali Express. Search for QR clamp for bicycle.
Toujours au top chapeau l'artiste
Excellent video and craftsmanship. Some real nice approaches.
Okay SUPER COOL!!! And I learned another cool trick in there when he used it as a plunge router at one point by pushing down and locking the collar afterwards. (I never thought of that.🤦♂) And then to see that drawer organizer with all that cool hardware in it! Where does he find all this stuff?
Really great ideas. One thing is missing: Fine adjustment at the ring in the beginning. 👍😉
Very nice multi functional base 👍
Brilliant idea 💕
Good and Cool !
Great work 👍
🤩🤩🤩👏👏👏Wonderfull!
I love the video, where did you get the cam clamps from (red clamps, and black clamps)?
It is a QR clamp for bicycles. It's easy to find at a bike parts store. thank you
Brilliant! I see a couple of uses for the acrylic base on stuff I do. Thanks heaps mate.
Es wäre nicht schlecht wenn du in der Zukunft immer die Maße erwähnen würdest ( Zum Beispiel wie stark die Plexiglas Platte ist )und wenn du auch mal deine Werkzeug verlinkst oder Zeigst welche Hersteller du benutzt (Zum Beispiel deine Bandsäge würde mich interessieren)
Danke 👍
Super 😉👍👍👍👍
Very useful and very inventive.
I’m new to RUclips can you tell me please how I get the drawing to make this jig I’m a new hobbyist & want to try routering in the summer
Ho great video
Thanks
I do not provide drawings. It has all the information you need for the video. You have to watch the video and follow along. Thank you.
amazing, good idea with the self centering jig
Que jigs interessantes você construiu e muito úteis para várias finalidades. Vou tentar aproveitar algumas dessas suas idéias para tentar aprimorar mais meus trabalhos com tupia. Obrigado por compartilhar seu trabalho cononsco. Parabéns. Abraços do Brasil.
bravo comme d'habitude astucieux et propre
really nice 👌
What thickness plastic are you using for the router base please
Thanks
6mm
Where did you get the acrylic?
Acrylic is easy to find here in Korea. There are many places that sell it.
아크릴 몇티 사용하신건가요?
6T 입니다
Das ist richtig geil 👍👍👍
Genius!!
Hi, what is the length and width of the acrylic sheet you cut
150mm×250mm
Excellent 💪💪👍👍
very nice ! congrats !
Wahouuuuu❤🤩🤩🤩
Parabéns pelo trabalho, vc é o cara.
10:50 what is this part? What is originally meant for?
I don't know its English name. It is hardware for furniture doors.
TOP!
Ça me fait toujours rire ces vidéos muettes, en accéléré et le doigt qui montre !
The great thing with these trim routers is that you can buy spare body clamp bases so each jig has its own and it's easy to just move the motor from one to another. I've bought these and the cycle clamps from Temu. 👍
And they delivered this in a plastic bag?
@@RiccoDelestaque Bubble wrapped and boxed and then in a plastic bag.
@@gedreillyhomestead6926 It seems that they deliver like that?
Bonjour
Les indications des mesures sont très utiles, alors les mots à profusion ne le sont pas.
J'adore ce genre de vidéos où l' élémentaire est mis en avant.
👍
Questioning "Hack #1":
Why add a bumper for that one round over bit if you have to move the bumper for any other bit or remove the bumper anytime you place the router in it's plunge base?
Is your router base too loose?
This is to adjust the height of the bit with the bumper in advance. Even if the height of the bit is changed during work, it can quickly and reliably return to the final height.
@@carpentak ah, now I get it
Parabéns pelo seu vídeo, obrigado pelo ensinamento. Abraço! (Robertson - Brasil)
AMAZING
This would have been good if there was some sort of narration.
Класс, 👍
You can do a list of Works for each one in times.
We thank you.
спасибо
정말 대단하세요
Love #1. Gave my Bosh palm router away years ago because the base would not hold the router depth correctly. Then again, can't complain about my Makita palm router.
Sensacional 👏 👏 👏
Genius
👍👍👍👍👍
👍👍👍👍👍
Hvala
Buenos trabajo
얼굴도잘생기셨을거같아요 카펜탁님🧡
Круто классно 🔥👍 ,
Но что б, селать одно приспособление
Сколько доп инструмента и обуродования надо !!!
Right everyone has all these tools
👍👍👍💯
👏👏👏+👍
😮👍🏼💪🏽
👏👏👍
👍👍🙏🏻🙏🏻
Genio
👌🙏
Обычное видео о том что нужно иметь станки за миллион денег чтобы сделать лайфхак. А так молодец
These cuts against the fence at the beginning…
А зачем было склеивать??? Для таких дел должна быть отдельная целая "приблуда" , у неё прочность выше, и качество реза точнее.
Надо было хотя бы три мелких винта вкрутить на клею с потайной головкой, пусть даже и с резьбой в оргстекле