You do not know the joy it brings me that someone has done a Cosworth DFV, everyone for some reason never mentions the DFV even though they sound amazing.
You think you could replicate the sound of a semi truck or similar heavy vehicle? The car engines sound fantastic but I'm wondering how far the engine simulation can be pushed.
Incredible! Except I never seen/worked on a DFV that idled at 1000 rpm 😜 they usually sit right around 2300 rpms in F1 trim! But I’m nitpicky, this is truly amazing
I don't know if you saw, but I made a Coventry Climax FWMV (1961) and put it in the engine sharing channel. Not nearly as good as your engine though, but cool we had the same idea to make vintage F1 engines.
Could you imagine Formula 1 engines in this? Like the V8 or V6 Turbo Hybrid Edit: or even aircraft engines like the Rolls Royce Merlin or Daimler-Benz DB-605 Edit 2: holy shit someone did the BMW-801D from the FW-190A
You have no idea how long I've been trying to make a Lamborghini Aventador v12. With your v12, I was able to actually make it! THANK YOU KIND SIR YOU ARE A LIFE SAVER
why it doesn't work on my pc? Your other engines work, but except this and viper one, maybe I also have to add custom transmission(bc these engines came with it)?
Could you do a 4L Ford Barra? I want to compare it to my version I made for Assetto. I've tried messing with the files for a few hours and couldn't figure out what they all do.
oooh? can you do a v6r4? from the mg6r4 410bhp with over 9000 rpm and absurd torque for how light the car it was in combined with awd, its the engine of the giant killer that never was
I think I am starting to see whats going on here, if you are planning on porting this to beamNG I would love you forever. I am always starved for unique sounding engines in beam, the base game ones are nice but get old after hearing them hundreds of times.
Are radial engines possible? It may be possible to attach many pistons to a single crank pin with like 3 or 5 cylinder banks with 1 cylinder each, I wonder how that might work and how the exhaust would be simulated for that. I'd make it but my own v12 engine is too hard on my system resources to run at 10kHz without severe audio lag and the simulation tends to fall apart when I turn it down and the pistons leave this realm of reality when I rev it up XD
You do not know the joy it brings me that someone has done a Cosworth DFV, everyone for some reason never mentions the DFV even though they sound amazing.
this is so fucking good
I love these simulations and your dedication to bringing us videos like this
Perhaps it would be very interesting to hear the Life L190 W12 3.5
The Cosworth DFV sounds so gooooood
You think you could replicate the sound of a semi truck or similar heavy vehicle? The car engines sound fantastic but I'm wondering how far the engine simulation can be pushed.
Theres a video of this simulation emulating a straight 6 cargo ship engine lol it's sounds extremely accurate, very slow rpm though
@@TheGoodChap ruclips.net/video/WaFDtrsuxPw/видео.html
How about pushing it in terms of a complex layout like a W8 from VW?
I would love to see a tutorial on how to make your engines!
Same here!
can you do the ferrari f131?
Can you do the Ford 302 small block V8 or perhaps the Ford Coyote V8?
I wonder if this simulation can come close to the amazing job Yamaha did with the 3S-GE.
Incredible! Except I never seen/worked on a DFV that idled at 1000 rpm 😜 they usually sit right around 2300 rpms in F1 trim! But I’m nitpicky, this is truly amazing
This is awesome! Would it be possible to implement the Mazda 13b wankel? Bet it would sound incredible.
I don't know if you saw, but I made a Coventry Climax FWMV (1961) and put it in the engine sharing channel. Not nearly as good as your engine though, but cool we had the same idea to make vintage F1 engines.
AI really wish I could find a technical breakdown of what gives these classic F1 V8's that "hollow" wail at full throttle.
Could you imagine Formula 1 engines in this? Like the V8 or V6 Turbo Hybrid
Edit: or even aircraft engines like the Rolls Royce Merlin or Daimler-Benz DB-605
Edit 2: holy shit someone did the BMW-801D from the FW-190A
“Could you imagine F1 engines in this” on a video simulating a F1 engine 🗿
@@cademckee7276 🗿
Someone made a V8 at some point I'm pretty sure
Need to do the LFA !
A judd V8 would be cool
The one time F1 sounds like NASCAR
My humble recommendation is going to be the Lexus LFA v10
You know what we want next, Lexus LFA 😂
You have no idea how long I've been trying to make a Lamborghini Aventador v12. With your v12, I was able to actually make it! THANK YOU KIND SIR YOU ARE A LIFE SAVER
Can it do multiple crankshafts chained together?
If so, I'd love to see if the tool can simulate the mess that is a BRM H16.
yup, works!
Works its just that nobody has tried it.
@@robben896 they have. 3 cranks even. It’s on the engine repository pinned in Ange’s discord
We need this sound in video games
I'd love to see some BMW engines
For example:
- m43b16
- m42b18
- m52b20
- m50b25
- m52b28
- m54b30
- s52b32
- s54b32
- m57d30
Can you make a V4 from honda VFR 800, its 90 degrees with 180 degrees crankshaft
why it doesn't work on my pc? Your other engines work, but except this and viper one, maybe I also have to add custom transmission(bc these engines came with it)?
can you please do the 6.5L V12 in the Murciélago LP 640?
VQ35 please? 🥺
any chance you could do the legendary M113k mercedes AMG engine?
How can you make the transmission and vehicle work ? It doesn't work even in the 0.9a version of the simulator
Please test the Cosworth m102 2.5 16v
would be cool to see an sr20de
Yo. This is sick. How about an aventador or a huracán? Those sounds are instantly recognizable
Any update on the GT5 chaser camera?
Could you do a 4L Ford Barra? I want to compare it to my version I made for Assetto. I've tried messing with the files for a few hours and couldn't figure out what they all do.
hey can you do a flat 6 1.5l please?
The engines from a 1998 honda valkyrie
Amg's V12 next?
do a 500ci V8 top fuel engine
You should try SLR engine ngl :D
sadly we cant hear supercharger or turbo noises but I think it will be made some time later
what about a 13B rotory ? RX7?
how do i make a flatplane crank?
Could you make a detailed tutorial on how to install engines?
Could you do an I4 that fires the outer cylinders at the same time?
can you do z19dth engine also known as 1.9 cdti :)
How do you keep the latency at 100? It keeps fluctuating for me.
How are you getting such good exhaust tone? These sound so much fuller sounding.
Custom convolution file most likely
Now all we need is Ferrari’s Tipo 053 V10 and Renault’s RS27 V8…
oooh? can you do a v6r4? from the mg6r4 410bhp with over 9000 rpm and absurd torque for how light the car it was in combined with awd, its the engine of the giant killer that never was
Good idea
@@vaz1677 ooh la laa, btw, if its basically hard bass you can hear a mile away, its just right
180% volumetric efficiency?
Could you do an r32 VR6 engine?
Could you possibly make a 4AGE?
please do an audi/volvo inline 5!
May I suggest the GM 3800?
what is your processor? I'm lagging with a i5 4460 when I take a big engine
I think I am starting to see whats going on here, if you are planning on porting this to beamNG I would love you forever. I am always starved for unique sounding engines in beam, the base game ones are nice but get old after hearing them hundreds of times.
rotaries possible on your engine?
VW beetle when?
can you make bmw s54/s65/s85?
Attempt #1 of asking for an EG33 simulation
Is it possible to do rotaries yet?
F1 v10?
yes
what happened to vir?
Bugatti w16 next?
Do the v6
Are radial engines possible? It may be possible to attach many pistons to a single crank pin with like 3 or 5 cylinder banks with 1 cylinder each, I wonder how that might work and how the exhaust would be simulated for that. I'd make it but my own v12 engine is too hard on my system resources to run at 10kHz without severe audio lag and the simulation tends to fall apart when I turn it down and the pistons leave this realm of reality when I rev it up XD
Someone have done it
@@Osaka_Ai Its kinda funny, since just minutes after I commented this RUclips went ahead and put like 2 or 3 in my recommendations XD
7 cylinder or 11
Next engine mercedes om606 super turbo please!
RB26DETT pls 🥺
3800 V6 🤔
do bmw m50b25 (i6)
give us a rotary please
now make a rotary
Now make an rotary :)