2018 - 2021 WRX/STI LED BEZEL INSTALL | SP3C BUiLT Switchback LED fog bezels
HTML-код
- Опубликовано: 11 сен 2024
- In this video we do an overview and install of the LED Bezels for the 2018, 2019, 2020 and 2021 WRX and STI. We also include specific instructions for the base/premium WRX vs the WRX Limited/STI that comes with LED Headlights. We offer three tiers of Bezels (better, best and OEM)
Our full aftermarket LED Bezels w/ Switchback function:
sp3cbuilt.com/...
sp3cbuilt.com/...
OEM Subaru JDM Bezels w/ Subie Bros LED switchback bars:
sp3cbuilt.com/...
Full OEM Subaru JDM LED Bezels (no turn signal):
sp3cbuilt.com/...
sp3cbuilt.com/...
sp3cbuilt.com/...
Link to bumper removal video: • 2015-2021 Subaru WRX/S...
Awesome! about time somebody makes these for us with 2018+ WRX and STI's. Thank you guys.
Fantastic video. I’m getting these for my series gray STi from you guys now instead of subispeed
Hey man, I have a Series Grey STI and am thinking of doing the same. Which did you go with? Any pictures?
@@rlominski I actually never got around to buying them as I picked up a 2003 tundra around this time and dumped money into it to make it road worthy again. Haven’t modded the STi yet otherwise but honestly I still firmly think these are the way to go.
What if you dont have the special harness for the c lights?
installing my JDM Bezel +sequential this weekend! Excited!
Awesome! We hope you love it! Make sure to email us if you have any questions.
Do you have to cut off one of the teeth on the fuse tap for it to fit properly? In the video it has only one “tooth” but the one I have looks the same but 2. Around 7:30ish
OEM bezels has much better fitment.. I had trouble fitting the after market bezel and ordered the OEM afterwards
Which brand did you buy? I had trouble with olm. They both cracked as I was installing them
Is it recommended to have mirrors turns with these bezels? Do they shine to the side as far (back) as the stock bumper turns?
Where did you get the yellow cable on mint 8.20. ????
The kit that I got has a different connection to the fuse. I also got the drl light harness add on. Is it supposed to connect to that fuse?
Where can I buy the plug and play harness? Which one do I need for a 2018 WRX STi?
Sweet video , im going over to the website
I purchased a fog lig kit from a different vendor and was told the bezels are black matte and not glass black like the 2021 is. Is there a specific part number for the 2021 I need to buy instead? I have a 2021 STI and wiring up new fogs. TIA!
Hi,
I have a 2015 WRX, but recently did a 2018-2020 front bumper conversion. I also have the Clear Tri-Bar Bezels with the add a fuse option, but I can’t figure out where to wire them. Am I missing anything to wire them and get them working? If so, could you guys tell me what all I’m missing.
Ever figure this out the fuse tap they gave me doesn’t fit anywhere in the fuse box?
Where can i get those plug n play turn signal harness? Having trouble installing on my 2020 Sti.
They are discounted when you buy any of the bezel options through us or you can purchase then separately here: subiebros.com/2018-wrx-limited-and-sti-turn-signal-plug-and-play-harness/
I have a 2018 base wrx I was going to order them but I option it says the harness if for wrx/Sti limited only witch harness do I get ? Or does it mater ?
Was hoping I wouldn't have to take out the headlight assemblies in order to get at the turn signal light for the PnP harness (I have a '21 STI)...looks like I could get at the driver's side w/out removal, but the passenger's side...I've got too big of hands to get in there...
Wound up just taking off the passenger side head light, was simple enough. I think I got the wrong bezel from what I ordered though...ordered bezels w/ sequential turn signal, looks like I got the normal JDM bezel + light bar (no turn signal).
Never mind, got it sorted, I’m an idiot. For other folks who come here after me, make sure you plug the connectors all the way in on the PnP harness and the OEM harness, and if you don’t get the turn signal in the bezel, flip the PnP connector 180 degrees. Learn from my mistakes 😂
Is it possible to use these as just turn signals? Without the DRL function?
I just bought these and I’m having a hard time getting two inner tabs to set. It is holding in place but the ones closest to the center of the bumper won’t seat. Both are doing this. Am I doing something incorrectly
...manufacturing variance? I've seen other instances where aftermarket fog bezels don't fit as securely as the stock ones.
I’m having the same issue on my 18 sti
I want to buy these for my 2020 sit but how do I tap into the fuse box without having any fog lights or turn signals to begin with?
...do you have the xenon lights w/the turn next to the headlights, active c-light drls, and mirror turns? If so, I think your setup is superior to these lights.
Can anyone link me that new relay module you need to buy, when I plug mine in the lights don’t turn off so I have to lift the wire every time I park or just leave it off completely
I like these...I wonder if you have something like this for a 2017 subaru legacy
Hi on 8:50 of the video, you talk about the custom harness for the diode dynamic C light. Where can I purchase that in your store? 🤔
Literally. They make a video with this and then never respond. Were you able to figure it out?
@@ChildishJordino nope! I just t-tapped the turns and wrapped it with electric tape 😂
When you purchase the Diode Dynamics C-Lights from us we include it for free as part of the kit!
The2019 sti doesn't come with any signal what do I need for thee
We have a turn signal plug and play harness for the STI/WRX Limited. You can see it at 12:35
Does anyone else have issues with the fitment?
Will they fit a 2017 wrx ?
I just got this fog light with DRLs on it but the DRL wont turn on unless the low beam is on. Do i need an additional harness?
The harness powers the DRLs and fog lights (at the same time) by using the low beam switch.
If the stock for low beam isn’t “on” or “auto” - while being dark enough to sense turning on - the harness won’t power on the fogs and DRLs.
Yes, the only way to bypass this would be rewiring the entire harness that comes with this kit. Essentially making 2 of the same harness, first new harness would be running to the fogs with its own “switch” - adding a fuse to low beam is most common. Second new harness would have to run to a different “switch” say a different fuse holder (not low beam) that would come on separately from the low beams. If you want them to be separate
Hope that makes some sense
They won’t turn off even when the car is off. Why don’t they turn off I have to disconnect them from the fuse box
Hi Jared, I would double check to make sure you have them plugged into the correct fuse slot. The fuse slot shown in the video will power them anytime the car's ignition is on the "on" position.
I just installed these on my 2019 sti and I got the turn signal pnp harness and the day time running light is working but the turn signal isn’t working on the bezel? Any fixes?
It is most likely that you have the negative and positive sides reversed on the turn signal harness. Where the turn signal harness plugs into the factory bulb socket (the one you removed from the headlight). unplug it and rotate one side 180 degrees so that it swaps the sides of the wires, this should fix it.
@@sp3cbuilt cool, it worked thanks!
will this only work for 2018+? i have 2016 i was wondering if itll work?
These particular bezels only work with the 2018+ front bumper. If you were to do a bumper conversion then it would work.
Will replacing the flasher relay cause any issues with the rear blinkers if they’re not leds?
No they won't, the only downside to it is that when a bulb does go out, you won't be alerted by the faster flashing.
SUBIE BROS Sweet thanks for the heads up! I’m going to get the Tail as Turn module, I’m hoping that helps because it will no longer use the original blinker
Why are these so expensive $320 subsipeed is $199 for ones with fog...am i missing something?
Hey Daniel,
The exact ones in these video use real OEM Subaru Bezels imported from Japan (more expensive but also more durable and a perfect fit). The ones that you are referencing for $199 are aftermarket bezels made by a 3rd party (non-OEM). We also have the aftermarket version available for $150 here: subiebros.com/2018-wrx-sti-drl-fog-light-bezels-w-fog-light-hole-sequential-turn-signals/
@@sp3cbuilt does that one for $150 on your site come with add a fuse and no splicing?
will they fit a 2021?
Yes, the 2021 modes is identical to the 2020 model so any parts that fit a 2020 will also fit a 2021.
@@sp3cbuilt great to know thank u 🙏🏽🤝
Looks like a complicated install 🤷🏽♂️
what if i do not have turn signals below stock? can i still add these?
Yes, they replace the factory turn signals since the LED bars have built in turn signals. It is plug and play.