[For beginners] Trim well! Types and usage of trimming tools.
HTML-код
- Опубликовано: 12 сен 2024
- What is the pottery hill trimming? Canna? Kakibella?
This section introduces typical trimming tools and explains how to use them.
Let's enjoy pottery by using tools well!
#Support your pottery life!
#Ceramics
#Hand binding
A pottery classroom channel for practicing and commentary on pottery production.
Easy-to-understand explanations from the basics of production to tips and tricks.
If you look at this, you can improve your pottery, and you will definitely want to try it out and your repertoire will increase!
From beginner to advanced, we will explain how to make ceramics from clay, electric wheel, hand-rolling, and mold making.
愛する芸大通う娘に 転送します😊 先生 いつもありがとうございます🙏親子共々 勉強になります🙏
コメントありがとうございます。
おーーー、娘さまが芸大に通われているのですね!将来が楽しみですね!
当方の動画が少しでもお役に立てば嬉しく思います。
今後ともよろしくお願い申し上げます。
きらく先生、いつもありがとうございます。
こちらこそ、見て頂きありがとうございます。
本当にわかりやすいです!とても参考になります!!
コメントありがとうございます。
参考にして頂き、充実した陶芸ライフをお送りください。
動画楽しみです。手びねりで削りをすると削りかすがちぎれて紐でけずれません。かきべらの当て方のコツを教えてほしいです。
手びねりの色々動画もお待ちしてます。
コメントありがとうございます。
手びねりの陶芸も楽しく難しいですよね!
少しずつコツを掴んでもらえると着実に上達すると思います。
当チャンネルの手びねり動画も見てください。
Thank you for posting this video. Have been using them for a while but didn’t know the details. Thank you so much for explaining.
Thank you for your comment.
I'm glad to see my video.
Please enjoy the ceramic art as a reference.
Love love love your instructions and the English subtitles help so much. Your a wonderful teacher thank you for your hard work.
Thanks for your comment!
It's easy to understand with English subtitles!
I will continue to do my best to add subtitles.
カキベラの使い方が分かりやすく大変勉強になりました。これは私の先生に教えてもらいませんでした。ありがとうございました。
コメントありがとうございます。
かきべらも使い方で要領よく削れる様になります。陶芸を楽しんでくださいね!
Thanks for explaining how each type of trimming tools are used for!
Thank you for your comment.
please refer.
ありがとう きらく さん! ビデオ は いつも いい です!🙏
こちらこそ、見てもらってありがとう!
参考にしてください。
@@kiraku-pottery KIRAKUさん、Instagram は ありますか?
I do not do Instagram.
Let's communicate on youtube!
It’s great to know what and how various tools are used for. Thanks for your demo!
Thanks for your comment!
It would be nice if you could choose the right tool for you. The choice of tools is also a pleasure.
いつも、わかり易い、動画を有難うございまし。私は陶芸教室に通いはじめてる者です。質問なんですが、高台を削る時期は作成後、何時間位経ったら削れるんですか?作成してすぐ削っても宜しいですか?教えて下さい。宜しくお願い致します。
コメントありがとうございます。
高台削りのタイミングは厳密には「硬さ」で判断します。削りやすい硬さになった際に削るのが一番です。
梅雨時は粘土が乾かないので時間がかかるし、エアコン下ではすぐに乾くので時間で判断すると差が出てしまいます。
目安に、エアコン下では6~8時間程度、梅雨時エアコン無では18~24時間程度が目安ですかね・・・
@@kiraku-pottery 早速の返信有難うございます。でしたら、陶芸教室では高台は削れないので、手で回すロクロを買った方が良いですね!有難うございました。又わからない事がありましたら質問させて貰って宜しいですか?わかり易いキラクさんの動画を見て陶芸が楽しくなってきました!
返信ありがとうございます。
通常、陶芸教室では生徒さんが来るときに合せて乾燥具合を調整しています。
発泡スチロールにいれて、来られるタイミングに合わせるのでお教室でも削り作業は出来ると思いますよ!
お教室の先生に聞いて見て下さい。
ピンホールのできる理由とその対策について教えて下さい。
コメントありがとうございます。
そうですね~ねらし時間を多くすればピンホールは少し解消するかもしれません。
使う釉薬(長石釉など)によっては、わざとピンホールが出来る様に狙う事もありますので、流れない釉薬ではピンホールが出来やすいと思います。
ピンホールの原因は、粘土から出てきたガスの通り道が釉薬の溶け不足でそのまま残ってしまっている状態です。
This video is really useful, thanks. I have some kakibella which arrived very blunt (the edge is not sharp). Should the edge be very sharp?
Thanks for your comment!
I think that the edge of "Kakibella" should be flat. Some things are made of round wires, so I think it's difficult to cut them. I think a flat wire "Kakibella" is good.
小道具で何か自作とかされていますか? もしあれば、いつかご紹介でも・・・。
いつもコメントありがとうございます。
自作のモノはヘラ位ですかね・・・結構購入した道具も使いますよ!
お返事、ありがとうございました。
いつも有難うございます。カキベラの手入れ方法や刃先が丸くなって削れにくくなった時の対処方法があれば教えて頂けますか。
コメントありがとうございます。
かきべらの手入れは、使用後に良く洗って乾かす位です。基本的には消耗品でワイヤーが細くなっていきますので、使うほどに削れやすくなると思います。ワイヤーが切れたら新しいモノに交換します。
有難うございました。
有難うございました。