I bought the Bauer surface tool on the 14th, with the 35% off, took the receipt back today, the refunded the 1st and gave me the one at 50% off, thanks HF,!!!!!
I’m a park ranger. I use wuben lights as “backup lights”. They are very reliable, very good battery life I can keep them in my bag for a month, pull it out, and it’s still ready to go. Keep them in all my cars and love them. EDC light as well by them. I had an issue with one over a year after I purchased and they sent me a replacement part at no charge.
I used to make meatballs by combining a pound of ground turkey and a pound of ground pork sausage. They were both cheaper than ground beef, and the fat and flavor of the pork countered the bland and dry of the turkey to finish up equivalent to beef. I also make turkey loaf by mixing a pound of turkey, a package of stuffing, a chopped onion and a half a jar of gravy and then baking.
Pro tip. Keep the cheap tools for your toolbox at home where if something breaks it's not a big deal. Put the best tools you can afford in an emergency kit because if one breaks on the side of a lonely road on a sub zero night you're screwed.
I have had the weather tech and it was great but expensive. Changed to the husky ones and they are just as good and fit perfect for less money for my truck. So bought the husky ones for the wife’s enclave too.
i heard that he stop using i because you tube made him stop using it because it attracted kids to watch it and his videos are not really for kids .. he can still use it but he has to make his videos monitored 😅
Wuben lights are pretty good IMO. I have a few of these in vehicles and around the house. They're bright as heck and durable! I drop one while riding my dirt bike. it bounced around but still worked and the lens and "glass" covering the lens held up well.
The gloves for the slim Jim is for reducing the pain of grasping the thin stainless its not sharp but thin. after couple of minute's of working with it starts hurting. However they started making cars slim Jim proof in the early 90,s.
I bought one of those Denali 40v lawn mowers during the Black Friday sale last year for like 60$ the jigsaw and multitool sets and they work pretty good. For the price I bought them for I would do it again. No complaints at all.
I have bought maybe 4 or 5 sets of weather tech mats and liners. Love them. Latest vehicle looked at cost and couldn’t do it. Bought Viwik at half the price of front weather tech and the rear came with it. Actually like these, very pliable, easy in and out and breeze to clean
Rubber wood is actually very decent. We remodeled our kitchen 2 years ago and we used butcher block made from Havea (rubberwood) and its holding up very well. Its in the maple family.
If you live in the Pacific Northwest, you gotta get rubber mats. I put weather tech to replace my worn out Toyota original. They were nice but I wasn’t careful and just got the flat mat instead of the full sided one. The Toyotas were better for a flat (they actually had a bit of a lip). I’d say look at OEM but if going weather tech, get the full sided bathtub style. Especially for those in places where rains and snows all winter. I hear you on cars. New ones are ridiculously expensive. My wife hates that I drive a 2004 Highlander. But it can’t be beat for hauling muddy/sandy/sticky kids.
Hey man, as someone that has owned a Creality Ender 3 for a LONG time now, the technology is out of date at this point and MicroCenter is likely just trying to clear stock at this point. For a better budget option these days the BambuLabs A1 Mini is where it is at. It is worth saving the money a bit longer and getting a 3D printer with up-to-date technology that you wont have to upgrade to make reliable. Thanks for the deals content!
Gearwrench 20 piece ratcheting wrench set was $50 last Black Friday at Farm and Fleet, I picked one up. I like Husky floor mats for my truck, they're cheaper and also have a lifetime warranty. WeatherTech has better designed mud flaps, they're easy to install.
At least you mentioned Lodge cast iron. I see no difference between the massively expensive European enameled cast iron and the Lodge. I have an oval Le Creuset with a dimpled lid and it like all enameled oven cast iron oven pots, is discolored and old looking. The thing that you did not mention is the self-basting dimples drip water each time you remove the lid LOL! I got mine for I think less than $70 on clearance. It does its job.
The issues I have with Staub is the black interior it makes it hard to gauge how done like onions or meat are if browning. The quality of construction is top notch.
I have to comment on the meat chopper, i use a more expensive one from Pampered Chef and i use it for cooking sausage for pizza, hamburger and ground pork for tacos and it saves time using it for avocados and other ingredients to make guacamole as well.
I had a 95 suburban that had over 500k on it when I sold it.. and I wish I hadn't lol. Also had a cummins 5.9 that had 560k when I sold it.. neither one ever left me stranded
I have the Lexivon bit set. I am happy with it. I also have a full set of their torque wrenches, and they have been flawless. I have the vessel bit set too. Once you have used Japanese screwdrivers, you won’t use anything else.
Hey tool bear, i just asking but can you do an review on an harbor freight welder one day, because i will love seeing you using it and giving your own opinions about it, thank 🐻🐻🐻
I’m interested in the Milwaukee hammer drill and the overhead garage rack. Do you think these will be lower in price with the upcoming prime days? Hold off or buy now ?
Weather Tech alternative... I have been using Husky Liners. I like Weather Tech products but I prefer the materials / feel of the X-ACT Contour Husky Liners.
I can personally vouch for the quality of that Lexivon hex bit socket set. Maybe "enhanced" refers to the fact that they built a foam pad into the lid? The tools all stay put in that case, I can tell you that.
I feel personally called out by the project vehicles/wife needs a reliable car comment 😂 (we got a '23 CR-V to compliment our fleet of s boxes). We also went weathertech based on previous positive experiences (I've had them in my tacoma for years). Have heard good things about Tux Mat as well.
Went from throwing snap on under the bus to now saying a 12pc wrench set from them for almost $1,000 is a "good deal" 🤔 There's some bs going on 🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔
I have both weather tech and husky. both economy cars the weather tech on model "a" covered undereath the handles for the gas cap release and trunk release but on model "b" only husky mats had did. check edge pattern on each brand but quality is about the same. To me water and dirt easily comes near door channel so i wanted extra plastic that press fits under those.
Not quite as good as the Work Pro ratcheting wrench set price but currently my local Tractor Supply does have the 20 piece Gear Wrench ratcheting wrench set on sale, down from $80 to $65. I don’t do a lot of automotive work but dang, I fight myself to not go in and buy these every time I drive past.
The Amazon description and product info for those SK Duckbill's does say country of origin is USA. I grabbed a pair so we'll see if they're right ... edit: They are indeed USA made.
Don’t bother with these 3D printers. When I had my Creality Ender 3 I spent much more time fixing it than printing (professionally I am a computer programmer - I didn’t just misread the instructions) Get a Bambu Lab printer - you can actually do stuff with it.
Robertson (square) drive needs to die. I have used it a lot lately and it has just as much cam out issues as Phillips drive. My most recent project I used all Torx deck screws and they were awesome. Thats all I want going forward.
Was going to say the same thing. Unless they have a much much better grade in Canada, never met a Robinson that didn't want to cam out/strip if it had been drivin into material for any amount of time
My halder mallet might just be the tool I pick up more than anything else. I bought it years ago knowing nothing about the brand, and have since delved a bit deeper into the specialty heads. Cannot recommend it enough
Hey Bear, I picked up the breaker bar with a ratchet last week at Harbor Freight……worked great. And they had it marked down. And I don’t miss the animation………
32:12. Of those Vessel powered screwdrivers, I'd recommend the 3 speed model with selector and USBC. The model listed uses a micro USB. I would avoid it for that reason alone.
I bought the Bauer surface tool on the 14th, with the 35% off, took the receipt back today, the refunded the 1st and gave me the one at 50% off, thanks HF,!!!!!
I’m a park ranger. I use wuben lights as “backup lights”. They are very reliable, very good battery life I can keep them in my bag for a month, pull it out, and it’s still ready to go. Keep them in all my cars and love them. EDC light as well by them. I had an issue with one over a year after I purchased and they sent me a replacement part at no charge.
I used to make meatballs by combining a pound of ground turkey and a pound of ground pork sausage. They were both cheaper than ground beef, and the fat and flavor of the pork countered the bland and dry of the turkey to finish up equivalent to beef. I also make turkey loaf by mixing a pound of turkey, a package of stuffing, a chopped onion and a half a jar of gravy and then baking.
"You don't wanna get any fingerprints on the... uh... tool." 🤣
I’d use it to borrow his truck.
Pro tip. Keep the cheap tools for your toolbox at home where if something breaks it's not a big deal. Put the best tools you can afford in an emergency kit because if one breaks on the side of a lonely road on a sub zero night you're screwed.
this guy is the guy breaking into cars doing some scout work on youtube 😭
I have had the weather tech and it was great but expensive. Changed to the husky ones and they are just as good and fit perfect for less money for my truck. So bought the husky ones for the wife’s enclave too.
Where's the leaked 10 days of deals video?
That was the only reason I watched this video and was disappointed 😔
Same here. Is the Big bear losing his street cred? 😅
Thanks. Just saved me 51 minutes of watching someone browse
Really, no reporting on this?
kinda miss the "tool bear" animation, not gonna lie...
I’m going to lie and say I miss that silly animation.
The company who did the software screwed Jeff over
Just make a mascot not that difficult
I’m going to lie and say I miss that silly animation.
i heard that he stop using i because you tube made him stop using it because it attracted kids to watch it and his videos are not really for kids .. he can still use it but he has to make his videos monitored 😅
Telescoping chainsaw. I'm going to wait for the telescoping tree ...😅
Nothing better than the Bear trying to pronounce French cookware. Had my wife dying.
@@StiffArm_34 le croissant
Wuben lights are pretty good IMO. I have a few of these in vehicles and around the house. They're bright as heck and durable! I drop one while riding my dirt bike. it bounced around but still worked and the lens and "glass" covering the lens held up well.
"Check your local ordinance before purchase".....😂😂. This is why we love you Jeff.
The gloves for the slim Jim is for reducing the pain of grasping the thin stainless its not sharp but thin. after couple of minute's of working with it starts hurting. However they started making cars slim Jim proof in the early 90,s.
Keep believing that...
Now they just pry the door open a crack and use a hook to flip the power lock switch.
rubber wood table top, for when you drop a tool it will bounce back up to you.
Boing!
I bought one of those Denali 40v lawn mowers during the Black Friday sale last year for like 60$ the jigsaw and multitool sets and they work pretty good. For the price I bought them for I would do it again. No complaints at all.
Ordered that little multimeter. Arrived today and it is awesome. Perfect as a quick use meter. Will be ordering more for gifts. 2:37
I have bought maybe 4 or 5 sets of weather tech mats and liners. Love them. Latest vehicle looked at cost and couldn’t do it. Bought Viwik at half the price of front weather tech and the rear came with it. Actually like these, very pliable, easy in and out and breeze to clean
I just bought a Wuben light a few days ago I ABSOLUTLEY Love that beast 👍🏻
I have had that Craftsman vaccuum with the blower, for about 7 years. I LOVE that thing. It's a beast
Rubber wood is actually very decent. We remodeled our kitchen 2 years ago and we used butcher block made from Havea (rubberwood) and its holding up very well. Its in the maple family.
10 days of deals harbor freight
If you live in the Pacific Northwest, you gotta get rubber mats. I put weather tech to replace my worn out Toyota original. They were nice but I wasn’t careful and just got the flat mat instead of the full sided one. The Toyotas were better for a flat (they actually had a bit of a lip). I’d say look at OEM but if going weather tech, get the full sided bathtub style. Especially for those in places where rains and snows all winter.
I hear you on cars. New ones are ridiculously expensive. My wife hates that I drive a 2004 Highlander. But it can’t be beat for hauling muddy/sandy/sticky kids.
Hey man, as someone that has owned a Creality Ender 3 for a LONG time now, the technology is out of date at this point and MicroCenter is likely just trying to clear stock at this point. For a better budget option these days the BambuLabs A1 Mini is where it is at. It is worth saving the money a bit longer and getting a 3D printer with up-to-date technology that you wont have to upgrade to make reliable. Thanks for the deals content!
I'm running out of room. You need to do a video on storage sheds...
Gearwrench 20 piece ratcheting wrench set was $50 last Black Friday at Farm and Fleet, I picked one up. I like Husky floor mats for my truck, they're cheaper and also have a lifetime warranty. WeatherTech has better designed mud flaps, they're easy to install.
“How could you beat that price? Oh! Gearwrench”
I think the 3D printer deal is first time customers only. At least that's been the deal in the past.
Lixie is the King of deadblow hammers. THE KING!
"Houston we have a problem..." That being you're not anywhere near me
Picked up a similar set of the thread checker. Love it.
The meat chopper thing is no joke. It makes cooking ground meat so much easier.
Those duckbills are made in U.S.A, saw it in the description/info.
just remember that smart lawn watering system needs an internet connection to function which means its useless.
I got an internet mesh system so I could put a security camera on my shed. Way better than a wifi extender.
Putin may hack into your internet and turn the sprinklers on.
Pegboard: What if you put your pegboard hangers on the inside, so the tools are hung underneath the bench top?
The north tech impact driver works pretty well for the cost. It’s not the most powerful thing in the world, but it just simply works.
At least you mentioned Lodge cast iron. I see no difference between the massively expensive European enameled cast iron and the Lodge. I have an oval Le Creuset with a dimpled lid and it like all enameled oven cast iron oven pots, is discolored and old looking. The thing that you did not mention is the self-basting dimples drip water each time you remove the lid LOL! I got mine for I think less than $70 on clearance. It does its job.
Ryobi has a nice work table with folding support legs on wheels, stands vertically for storage and doubles as a hand truck for only $200.
The issues I have with Staub is the black interior it makes it hard to gauge how done like onions or meat are if browning. The quality of construction is top notch.
I have to comment on the meat chopper, i use a more expensive one from Pampered Chef and i use it for cooking sausage for pizza, hamburger and ground pork for tacos and it saves time using it for avocados and other ingredients to make guacamole as well.
I had a 95 suburban that had over 500k on it when I sold it.. and I wish I hadn't lol. Also had a cummins 5.9 that had 560k when I sold it.. neither one ever left me stranded
I have the Lexivon bit set. I am happy with it. I also have a full set of their torque wrenches, and they have been flawless. I have the vessel bit set too. Once you have used Japanese screwdrivers, you won’t use anything else.
The ground beef masher. Been suffering with a thin wooden spatula for years. This will be awesome.
Mrs. Den of tools is Peter Griffin hitting his knee meme. Hope she is well.
Very thoughtful of them to include gloves with the slim jim...
Darn I was just at Microcenter yesterday... 2+ hour drive away.
The d2 lazer doesn’t have the 30% off coupon anymore😢
Weather tech has a heavy duty custom fit floor mat, it is worth the additional money.
Hey tool bear, i just asking but can you do an review on an harbor freight welder one day, because i will love seeing you using it and giving your own opinions about it, thank 🐻🐻🐻
I still have the corded blower from the first shop vac I bought in 1990😂 I’ve had 2 since without the blower, and need another soon.
That Atlas chainsaw deal they threw out there got me. I've got one gas and now one electric. Love it.
I’m interested in the Milwaukee hammer drill and the overhead garage rack. Do you think these will be lower in price with the upcoming prime days? Hold off or buy now ?
Wuben lights are great, fantastic price point often on sale . Bright lights for little money. 4 stars easy
Weather Tech alternative... I have been using Husky Liners. I like Weather Tech products but I prefer the materials / feel of the X-ACT Contour Husky Liners.
You had my wife and I crying with your pronouncing/butchering the Fench cookware names.😂😂
I can personally vouch for the quality of that Lexivon hex bit socket set.
Maybe "enhanced" refers to the fact that they built a foam pad into the lid? The tools all stay put in that case, I can tell you that.
I feel personally called out by the project vehicles/wife needs a reliable car comment 😂 (we got a '23 CR-V to compliment our fleet of s boxes). We also went weathertech based on previous positive experiences (I've had them in my tacoma for years). Have heard good things about Tux Mat as well.
Went from throwing snap on under the bus to now saying a 12pc wrench set from them for almost $1,000 is a "good deal" 🤔
There's some bs going on 🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔
Sarcasm.
Did u listen???? Snap on $900 set, how can u beat that price?….. Boom!!! $200 wrench set!! He was TROLLING them 🤦🏼♂️
Those meat choppers are great for more than beef and turkey. it also works good on mashed potatoes.
North Tech was Menard's in-house brand name for batteries. I guess they want to have a line of tools that competes with Harbor Freight's Warrior line.
I have both weather tech and husky. both economy cars the weather tech on model "a" covered undereath the handles for the gas cap release and trunk release but on model "b" only husky mats had did. check edge pattern on each brand but quality is about the same. To me water and dirt easily comes near door channel so i wanted extra plastic that press fits under those.
Not quite as good as the Work Pro ratcheting wrench set price but currently my local Tractor Supply does have the 20 piece Gear Wrench ratcheting wrench set on sale, down from $80 to $65. I don’t do a lot of automotive work but dang, I fight myself to not go in and buy these every time I drive past.
Just clicked on video I wonder if I can find me a deal on jump starter 🤣🤣🤣 maybe a mini chainsaw. Every week is a deal on same things
I noticed that also. Especially the jump starters.
Usually super cheaply made china stuff too. But definitely a couple goodies sprinkled in.
I love my wuben light I got off Amazon very small and bright and a great magnet I’d highly recommend it
Every year retailers panic about this time. Money money money
Thank you !!
The Amazon description and product info for those SK Duckbill's does say country of origin is USA. I grabbed a pair so we'll see if they're right ... edit: They are indeed USA made.
I have that workpro 22p set and it's a beast
🤣🤣🤣🤣Local Montana store is in Houston... Is there a Houston Montana?😅
dEaLs Of ThE wEeK!!!
(figured half caps would be yelling softly)
I feel like the Yukon workbench is a way better deal than this one
It is interesting how careful you have to be about slim jims... so you don't end up in YT jail.
Don’t bother with these 3D printers. When I had my Creality Ender 3 I spent much more time fixing it than printing (professionally I am a computer programmer - I didn’t just misread the instructions) Get a Bambu Lab printer - you can actually do stuff with it.
Robertson (square) drive needs to die. I have used it a lot lately and it has just as much cam out issues as Phillips drive. My most recent project I used all Torx deck screws and they were awesome. Thats all I want going forward.
Was going to say the same thing. Unless they have a much much better grade in Canada, never met a Robinson that didn't want to cam out/strip if it had been drivin into material for any amount of time
Can you do a review video on the new Hercules shop vac?
My halder mallet might just be the tool I pick up more than anything else. I bought it years ago knowing nothing about the brand, and have since delved a bit deeper into the specialty heads. Cannot recommend it enough
MENARDS! Come to Utah. PLEASE 🙏
Hey Bear, I picked up the breaker bar with a ratchet last week at Harbor Freight……worked great. And they had it marked down. And I don’t miss the animation………
Harbor Freight has the Haul Master 1000lb hydraulic cart on clearance?? Something better coming or should I grab one now??
I like the Harris shuffle on the slim j!m
Olight is junk. I’m done buying shit lights. I just run cloud defensive MCH’s or streamlight microstreams
My wife wants to know if Enjoywood the same as Morning Wood...
"Depends on you" was my reply...
Their worried about temu too lol
Is it Octoberfest? So many tools from the Fatherland...
Next time you make taco meat, put lb of ground turkey with your ground beef and tell me you don’t like the turkey!
Knipex, Wiha, and wera deals on Woot.
Slim Jim on sale. Whoda thunk it?
Thanks! But where is my HF 10 days of deals LEAK so we can see whats next? Grease those palms
Thanks, Bear!
I need some deals on good quality kitchen knives. I’m sick of cheap junk knives
Creality 3d printer...man if you think Snap On people can get annoying. You obviously haven't met Bamboo 3d printer users.
32:12. Of those Vessel powered screwdrivers, I'd recommend the 3 speed model with selector and USBC. The model listed uses a micro USB. I would avoid it for that reason alone.
I hope you don't think ur teenager is willing to trade down .... He'll never come back home if he thinks ur taking his ride . My teens wouldn't. Lol
Catfish Dave ain't catchin any and I saw Craftsman in your thumbnail.
Not gonna lie, I like the blower vac combo. Surprised no one has done it sooner. I don't like it that much for $150 though.
Ouch stitches suck
Nissan? Reliable? Good luck with that.
My Xterra has 225k and no issues.
@diemman70 Great! In no possible way changes my opinion, but it's great to hear.
Know your wife 😂
I like Wuben so what you said doesn’t apply to everyone here.
Nissan and reliable do not go together lol. Should buy Toyota.
lol great show man fan fricking tastick 😂 love great food take care
$900 ridiculous crap
He says its a good deal
All no name brand crap they all reached out to him ....