*✌ Congratulations to Adam H. from Antelope, CA, USA who won RC Monster Truck* (goo.gl/dkJQPO) *from Banggood. An email has been sent for you to collect your prize. Winner Wall of Fame:* goo.gl/RdGLqH *The contest is now closed. If you missed it, learn how to get in the next one:* goo.gl/BkXQZL *For an even better chance to win, follow me on Instagram:* instagram.com/thekingofrandom *& Facebook:* facebook.com/thekingofrandomfanpage
OMG Grant the was epic! I expected a memorable and scary injury, you delivered fearless science magic 🔥🔥🔥. Thanks for educating in this one, I always want to know why and how.
This is very incredible stuff up until now I didn't know how to do it but now that you've showed me I'm sure that to make my product will be a lot cheaper
Utilize the Clausis-Clapeyron equation (differential form) with knowledge of the latent heat of melting and the change in volume information as a function of T for propane. Integrate with respect to temperature, and ideally... this equation can be utilized to predict at a specified pressure what temperatures are necessary to melt/freeze propane. Insert N2 vaporization temperature into the equation and solve for pressure. If pressure is not to ~ equal to 101325 Pa, you either need a vacuum or a sealed container.
internetwhipsme no it is possible Grant Sir can use the T.V lens he used in the video" Power of Sun" in doing an arrangement that the lens concentrate the sun:s heat from top and the propane Torches heat from the Bottom and in this way he can get large amount of heat and also the fuel will be used less.
Pieguy55 it's an Oxidized form of Iron, which has a different (probably lower) melting point than Iron. Also, I think pyrite, being a Sulfur compound, might burn in air making Iron Oxide rust, and Sulfur Dioxide.
yup... I'm a software engineer, so... if exponential meant what he thinks it means I'm pretty sure my job would be a lot easier... =p then again... if all growth was exponential, then I think I'd be in trouble in other ways entirely... >_> =p
That would require a pressure chamber and sincerely low temperatures. Feasible in theory but I am unsure if it is physically do-able in any reasonable sense. Any Chemical Engineers who could confirm or deny this?
You don't need a pressure chamber; you just need gas at pressure. A tank of liquid-state gas would suffice (as shown in the video above). Just add the liquid propane into another liquid-state gas that has a lower boiling temperature than propane's melting temperature. Nitrogen would work just fine, and Grant has plenty of that! :)
you would be better off using coal or potentially charcoal (not cooking charcoal) or maybe methane. to actually make propane, it is more trouble than it's worth.
"around exactly" :) No, exactly. Just exactly: -40 F is just exactly -40 C (same in both directions). Also, 80/7 F (11 and 3/7 F) is just exactly -80/7 C. Or -11 and 3/7 C, if you prefer.
Surely -40°F is =~ 419.67°R or around 233.15°K which I estimate equates to, in my rough approximation, -40°C, or there abouts. Which is very nearly -32°Ré. Maybe this will clarify it for you. [°F] = ([°Rø] − 7.5) × 24⁄7 + 32, then [°R] = ([°Rø] − 7.5) × 24⁄7 + 491.67.
Hmm, so how flammable would Propane ice be? I imagine initially a general burn but as it heats up it would become more vigorous until it completely melted.
In the US at least, you can get a Bernzomatic brand bundle that has a propane canister, nozzle, and some silver solder at Walmart or a hardware store. Like 20 bucks so
Chrisler Tom Goza grab a perfume bottle and put in it as much red pepper powder u want the more the more harm it does then close it and shake it and spray the pain on ur enemies
no exponentially means that it is to an exponent. say the one opening was 2 square millimeters and the other one was 4, then it would be 2^2 thus exponential
That would depend on the the amounts of each. If he put a sample of liquid propane (-43F) in an excess of liquid nitrogen (-320F), then the nitrogen should freeze the propane into a solid as is boils/evaporates away.
+xBIGFACEDSHADOWx But plants don't use atmospheric oxygen. They break down water into hydrogen and oxygen and use that for photosynthesis. So they only need water and the elements that make up water (plus sunlight and carbon dioxide and the elements that make up CO2).
This is so poorly written. Among so many other odd statements, it's misleading to say "the glass fills itself up." The glass does no such thing. The glass is filled by the propane draining from the propane bottle. Coming soon, "what happens if I tap this dynamite with a hammer?"
The surface area of the propane exposed to the flame is much fairly small in the cup, causing it to ignite slower. However, when you emptied the contents of the glass the surface area increased. Isn't that why there is a difference between the oxidation rates? Doesn't the density of propane play a key role in this process too? This was a very interesting video, keep up the great work.
hey Grant. how about for Easter you could try hard boiled eggs in a vacuum and see if the shell cracks, also try coloring them in a vacuum to see if the dye penitrates the shell more effectively, and also I'm not sure if you did it last year but the golden eggs is a cool one where you spin a egg and change its direction suddenly mixing the yolk and whites of the egg within the shell.
hi, i`m an old disabled feild mechanic. I always had a 20 lb tank of propane and a blow torch for tank. torch had about a 10 ft hose and when not used to heat or burn i would use liquide propane to freeze shrink bearing races. This is known as cold welding. The race will only 1- 10,000 s bigger than hole it is to be installed in. remove old race, Put race in old cooler and take torch head off hose assembly, tilt tank upside down put hose in add,enough propane in to cover thickness of race, place race in liquid it will boil propane{bubbles} heat base where race must fit, it will expand a small bit then take frozen race that will have shrunk a small bit and drive in with tool, the heat exchange will mahe hole smaller and race bigger so cold welded.
*✌ Congratulations to Adam H. from Antelope, CA, USA
who won RC Monster Truck* (goo.gl/dkJQPO) *from Banggood. An email has been sent for you to collect your prize. Winner Wall of Fame:* goo.gl/RdGLqH
*The contest is now closed. If you missed it, learn how to get in the next one:* goo.gl/BkXQZL
*For an even better chance to win, follow me on Instagram:* instagram.com/thekingofrandom *& Facebook:* facebook.com/thekingofrandomfanpage
Grant Thompson - "The King of Random" sup
A
pour molten salt in liquid nitrogen . please
Grant Thompson - "The King of Random" im early af.
Wait.. How was this comment posted 14 hours ago.. :O?
I love how you give us awesome dangerous projects and at the same time teach us something and explain what your doing and why something is happening.
It's really nice that he is back to cool experiments and that he added the learning part in the end.
OMG Grant the was epic! I expected a memorable and scary injury, you delivered fearless science magic 🔥🔥🔥. Thanks for educating in this one, I always want to know why and how.
very cool! you can increase the liquid propane yield from the bottle by cooling it in the freezer beforehand
These are the random videos I have missed, thanks for bringing them back
Nick Baker Same
The fire looks so cool!
Can you freeze liquid propane with liquid nitrogen? and can you light up the liquid propane ice?
A man has no name That was funny xD
Or solid propane
Joshtigo Fial ii
Joshtigo Fial this is soooo dope i wana do this lol
Joshtigo Fial Nope. Propane ice won't light on fire.
This is very incredible stuff up until now I didn't know how to do it but now that you've showed me I'm sure that to make my product will be a lot cheaper
Can you try and make glass with the trash can foundry
can you freeze it with liquid nitrogen and make solid propane?
no
You're a happy squirrel today arent you?
who are you talking to
Utilize the Clausis-Clapeyron equation (differential form) with knowledge of the latent heat of melting and the change in volume information as a function of T for propane. Integrate with respect to temperature, and ideally... this equation can be utilized to predict at a specified pressure what temperatures are necessary to melt/freeze propane. Insert N2 vaporization temperature into the equation and solve for pressure. If pressure is not to ~ equal to 101325 Pa, you either need a vacuum or a sealed container.
JoeAceJR anything can become a solid I'm sure
KOR you are so unique not only do u do the best experiments on youtube but you recap ot and have awsome giveaways. u r the best.
can you make glass in the new foundry you made??
guys like if you support.
Try all sands
sand has a really high boiling point so it probably can't even if he tried it
internetwhipsme no it is possible Grant Sir can use the T.V lens he used in the video" Power of Sun" in doing an arrangement that the lens concentrate the sun:s heat from top and the propane Torches heat from the Bottom and in this way he can get large amount of heat and also the fuel will be used less.
I hope Grant Sir you liked my idea.
You promised to show us your liquid nitrogen generator. I'm really interested in that!
Yes, Me too!
hallo koos ek sien jus afrikaans
Gretchen De Lange Nee Nederlands.
Selle ding haha
He said he would make a more in depth video on his own channel about his liquid nitrogen generator
The cinematography in those videos was so fascinating
I don't no why it just was
try putting dry ice in the liquid propane and then light it
Actually might be interesting
eyal yatskan yeah do that!
It wouldn't light. The CO2 would suffocate the flame by taking the place of the oxygen needed to combust.
***** oh yeah duh
I sell propane and propane accessories.
HANK
im sure you do
……..|::::::::,-': : : : : : : : - -~''''¯¯''-„: : : : :\
……..|::::::::|: : : : : : : : : _„„--~'''''~-„: : : : '|
……..'|:::::::,': : : : : : :_„„-: : : : : : : : ~--„_: |'
………|::::::|: : : „--~~'''~~''''''''-„…_..„~''''''''''''¯|
………|:::::,':_„„-|: : :_„---~: : :|''¯¯''''|: ~---„_: ||
……..,~-,/'': : : :|: :(O): : : :|: : : :|:(O_): \..|
……../,'-,: : : : : ''-,_______,-'': : : : ''-„_____|
……..\: :|: : : : : : : : : : : : : :„: : : : :-,: : : ::\
………',:': : : : : : : : : : : : :,-'__: : : :_',: : : ,'
……….'-,': : : : : :___„: : :'': : ¯''~~'': ': : ~--|'
………….|: ,: : : : : : : : : : : : : : : : : : : : : :|
………….'|: \: : : : : : : : -,„_„„-~~--~--„_: :: |
…………..|: \: : : : : : : : : : : :-------~: : : : |
I tell ya h’what.
I love your videos so much. It's like a class every video I watch. I learn so much. Thank you for the great content.
Hank Hill would be proud
Taste the meat not the heat
Gucci Versace did somebody say propane?
I sell propane and propane accessories
When The King of Random crosses over to King of the Hill.
The fire on the concrete at the end was soo epic looking. Looked like a movie effect.
-40°F is is same as -40°C I just wanted you to know.
no it not
Yes it is...
swagaw3some yes it is
The cool thing is that it actually is!
welcome to OCD therapy
Wow, background music is a version of the Bed Intruder song from Schmoyoho.
UltraTwitch its a cool beat
Cool video, I was surprised the glass didn't break unless it was pyrex or something similar.
Yeah, he scared me when he picked it up and sloshed it around. If that glass broke due to thermal stress, he might get doused with flaming liquid.
Do I hear bed intruder instrumental in the background
+the Toasty bagel oh yeah!
grab yo kidz
the Toasty bagel Hello, bagel brother
Ddude that slow mo clip at the end where you released the fire was sick.
Yeah I found it difficult to watch without thinking "Hide your kids, hide yo wire" lol
Melt fools gold! Like if you agree.
I don't think that he would be able to because fools gold is Iron Pyrite and Iron has a pretty high melting point.
Pieguy55 this guy rearranged a microwave and used it to melt rocks into lava. Don't underestimate him.
Pieguy55 it's an Oxidized form of Iron, which has a different (probably lower) melting point than Iron. Also, I think pyrite, being a Sulfur compound, might burn in air making Iron Oxide rust, and Sulfur Dioxide.
The instrumental in the back. 😄 Recognized that instantly and checked the description to make sure.
Where are the accessories?
If liquid propane can hurt you, I guess you can call it Liquid Pro-pain! 😂😂😂😄😅😅😐😓😶 Please don't hurt me.
😁
This is one of your best videos in a long time
Hank hill would love this episode
you are still using that word "exponentially", I do not think it means what you think it means...
Thank you!! I thought I was the only one.
yup... I'm a software engineer, so... if exponential meant what he thinks it means I'm pretty sure my job would be a lot easier... =p
then again... if all growth was exponential, then I think I'd be in trouble in other ways entirely... >_>
=p
He's just using the layman's meaning which is "huge increase".
Exponential also means very rapid. Know ur facts
Technically, any multiplication can be expressed as an exponent, so Grant is not incorrect in saying that, it just sounds silly.
I'll overlook the "match floating on the bottom" comment and say this is one the best videos you have made in awhile.
make a DIY flame thrower
Offensive Negan get a lighter... use the fire and blow a huge can of deodorant spray into the flame and boom you got a flamethrower
Cardz _ I know that I just wanted him to make a badass flame thrower wouldn't you agree
Cardz _ It's too primitive. The flame could go back in the can and explode!
check out the converting your foundry to propane video.
Colinfurze did that already
Can you make SOLID PROPANE?
It will be cool to see :0 ;)
If he mixes a small amount of liq propane in an excess of liq nitrogen, the nitrogen should be able to freeze the propane as the nitrogen boils away.
That would require a pressure chamber and sincerely low temperatures. Feasible in theory but I am unsure if it is physically do-able in any reasonable sense. Any Chemical Engineers who could confirm or deny this?
You don't need a pressure chamber; you just need gas at pressure. A tank of liquid-state gas would suffice (as shown in the video above). Just add the liquid propane into another liquid-state gas that has a lower boiling temperature than propane's melting temperature. Nitrogen would work just fine, and Grant has plenty of that! :)
Who knows, maybe it's possible if you pressurize the gas and you put it in vacuum so you can drop the temperature...
Dude your fascination with fire is strangley entertaining
That's one way to toast a marshmallow!
lets make the hole bigger
That's what he said
The Hacksineer Tje only way to do that is to gl further
The Hacksineer she*
Nevermind
The Hacksineer Fill itself up
Mate, go to household hacker if you're looking for that kind of video
I've been wating for forever for a video like this
Was your homeowners insurance cancelled after your agent saw this video?
Edwards Journey hopefully yes
Hey Grant!
Can you make a video on home-made Liquid Nitrogen ?!.
Swastik Bhat cool dude ima check you out after i watch this
He already did that.
Hey Eric Schwartz
Yeah ?!. What is the Name of the Video if he has done it ?.
Hey Westrn Man
I am sorry bro didn't get you! :D
Hi there , first of all thanks for all these amazing experiment. Second, Can you make butter using an Ultrasonic cleaner. And thanks again.
can you make video on how to make propane gas beacuseit is not easily available in our country for aluminium foundry!
you would be better off using coal or potentially charcoal (not cooking charcoal) or maybe methane. to actually make propane, it is more trouble than it's worth.
If you want to be a badass use HHO and hope it doesn't explode or go out because of all the steam
sorry but that's almost impossible (unless you're willing to spend thousands of euros for the installations)
Anticonny we have butane easily available not propane
I saw this and was thinking "propane and propane accessories" *like if you know what that's from*
you are a legend Grand.
-40f is around exactly -40c, not -42c
"around exactly" :)
No, exactly. Just exactly: -40 F is just exactly -40 C (same in both directions). Also, 80/7 F (11 and 3/7 F) is just exactly -80/7 C. Or -11 and 3/7 C, if you prefer.
Surely -40°F is =~ 419.67°R or around 233.15°K which I estimate equates to, in my rough approximation, -40°C, or there abouts. Which is very nearly -32°Ré. Maybe this will clarify it for you. [°F] = ([°Rø] − 7.5) × 24⁄7 + 32, then [°R] = ([°Rø] − 7.5) × 24⁄7 + 491.67.
So could you use liquid propane in marijuana trichrome extractions? How long will the liquid exist before presumably evaporating??? Great video
This guy deserves a lot more subscribers.
what would happen if you burn 1kg of gun powder
kaboom
Michal Sulowski
hiroshima 2.0
Alan Sandpotato lol
It burns.
if that would happen he'd be drunk
May he rest in peace.
All of a sudden, these video seem like science class.... dangerous virtual science class, but the recap is actually kind of cool.
what will happen when you mix liquid propane and liquid oxygen and then put it on fire.....
pls try
Anugrah Paul rocket fuel
Depending on how close the ratio is, it would detonate with more or less power.
nasa
You said liquid Propane is cold but not as cold as liquid nitrogen What if you put the liquid propane into the liquid nitrogen?
Will it freeze? will it mix or become solid?
Mr. Hymn It will devour your soul
fan i helvete
Depends on the mix obviously
You clearly didnt even watch the video. He said what the freezing point is of propane
I like that he did everything i was wondering about
What would happen if you mixed liquid propane with liquid nitrogen would it still burn? or wouldn't it be to cold to get set on fire
Legendary123 C. No oxygen No burn
the boiling point of Nitrogen is lower than the freezing point of Propane, so the propane would freeze.
Hmm, so how flammable would Propane ice be? I imagine initially a general burn but as it heats up it would become more vigorous until it completely melted.
Yes but some gas doesn't need oxygen wen you mix both to gether maybe it makes a new gas we're it doesn't need oxygen
21 seconds ago?!...
under 1 minute club
Me
a-lpha of Zeldaforme Gaming "me" bruh you commented 10 minutes after the vid was posted
hopefully you'll last longer with age and experience, hopefully..
Great videos, just wish you had a catalog archive of them all.
Is the background music bed intruder instrumental?
xx_progamer550_xx// Nowlookatthisnet550 I was thinking the same thing! That's all I could pay attention to.
So much this. I was going to say, anyone else notice? He's climbin' in yo windows... ahh dammit it says it right in the description. hahaha
"You can smell the propane when you pass me"
Quavo(Migos),2017
Thodoris Nomikos you need a break from the Internet
guth axor And what kind of "break" do I need?
Shoot propane at dry ice ( with the torch)
I aint propane! I'm propleasure! :)
Now put liquid propane into liquid nitrogen, freeze it.
finally something I can try at home!
-40 Fahrenheit is -40 Celsius. great vid by the way
What if you do that with a oxygen blowtorch will it make liquid oxygen?
Six Shot Gaming no. Oxygen needs to be much colder than that could get.
Oxygen is a inertia gas. It has to be condensed and kept very cold to remain a liquid.
Do more PROJECTS DUDE!!!!
u sound like a science professor
DID YOU KNOW?
😁
If you have a Toothache ,
Rub some ice between your thumb and forefinger
This can relieve the pain by up to 50 percent.
💛💛💛💛💛
DrHacker did you know I did not know that?
Mark W
hahaha
*I SELL PROPANE AND PROPANE ACCESSORIES*.
Sodium Tetraborate wow you're funny and original.
I was expexting that.
*OH YOU KNOW IT!!!1111!!11!*
You said the glass is half full. Glad to see you are an optimist.
No it was defitetly half empty!
Do videos with annoying background music get more views like Coke product placements?
make a fire wall!!!!!!! or a
Liquid Propane fountan
I started smiling as soon as I read "Liquid Propane fountain"! That sounds like a bad/awesome idea!
Kevin (aka The Backyard Scientist) is awesome!!!
I would love to try this but seriously, 40$ just for the nozzle.
DaRealDeal really?! Wow
DaRealDeal Use a refill gas-bottle then? easy access, no special tools needed. just push the valve in.
DaRealDeal swap meet or yard sales very cheap there
You can find cheap $13 ones at the hardware stores
In the US at least, you can get a Bernzomatic brand bundle that has a propane canister, nozzle, and some silver solder at Walmart or a hardware store. Like 20 bucks so
can you make a pepper spray
Chrisler Tom Goza That's impossible man even my dad can make it
Mat studio maybe just maybe I think
Chrisler Tom Goza grab a perfume bottle and put in it as much red pepper powder u want the more the more harm it does then close it and shake it and spray the pain on ur enemies
Tôpãž Thė róyåł Gęm wow thanks
do you even know what exponentially means
Pixel Perfect you mean exponentially?
Cause' he used it wrong in the vid.
Exponentially means increasing at an increasing rate
Uninsulated Shrimp yeah thanks lol
no exponentially means that it is to an exponent. say the one opening was 2 square millimeters and the other one was 4, then it would be 2^2 thus exponential
I don't personally know you, but I might be smarter than you think I am
Random_rapper20 oh ok that makes it so much better 😀
You should make exploding cascarones for Easter 🐣
They are Spanish confetti filled eggs so an explosion would be cool 😎
Peeps
+Mike O'Brien oh my
another awesome video and something on youtube i dont need to to try
make a molotov with that or just make a molotov cocktail. Like if you agree
do you think I care?
Hide yo kids, Hide yo wives instrumental playing in the background, haha feel free to sing along lol
like if noticed it too!
THAT SONG IS STUCK ON MA HEAD LIKE WTF HAHAHA
You don't have to come and confess, we're lookin' for you!
i noticed it saying the name of the song and "- instrumental" x)
Looks like magic on that concrete :o
Try doing this at night plz
why not try mixing indium and gallium???
Orange Or making Galinstan
We were hoping you would make that video...
OMG That song! The bed intruder instrumental! ahahaha :D epic! simply epic!
loved this experiment, especially spilling it on the pavement
Try using methane
a-lpha of Zeldaforme Gaming You mean farts
Pannawan yuthin NO 🙅🙅🙍
methene>methane
Alsy try acetylene
i love how this channel is full of science nerds
I sell propane and propane accessories
*I tell you hwhat!*
Wow...that is another cool video 👍
liquid propane water balloons
Pseudo Memes exactly
hey put liquid propane in the liquid nitrogen.
BLADES AND GEARS the nitrogen would boil off like with the dry ice in nitrogen experiment he did before.
That would depend on the the amounts of each. If he put a sample of liquid propane (-43F) in an excess of liquid nitrogen (-320F), then the nitrogen should freeze the propane into a solid as is boils/evaporates away.
very educative.thank you
Hey king of random ! why don't you do an experiment on prince Rupert's drop?
Like if u agree
will plants die without oxygen ?
Make a video please.
Yes. Without oxygen, they can't photosynthesise. If they can't do that, no energy and they die.
xBIGFACEDSHADOWx but don't they need just carbon dioxide ?
they would make oxygen, in a room full of co2 they would live
Shiven Garg Plants need carbon dioxide to photosynthesize, AKA: make food. However they need oxygen to respire like us:-)
+xBIGFACEDSHADOWx But plants don't use atmospheric oxygen. They break down water into hydrogen and oxygen and use that for photosynthesis. So they only need water and the elements that make up water (plus sunlight and carbon dioxide and the elements that make up CO2).
Science! Much excitement
This is so poorly written. Among so many other odd statements, it's misleading to say "the glass fills itself up." The glass does no such thing. The glass is filled by the propane draining from the propane bottle. Coming soon, "what happens if I tap this dynamite with a hammer?"
Agreed!
dynamite doesnt detonate with shock - thats TNT-
This dude is a wizard
Great video Bro. Love it!
The surface area of the propane exposed to the flame is much fairly small in the cup, causing it to ignite slower. However, when you emptied the contents of the glass the surface area increased. Isn't that why there is a difference between the oxidation rates? Doesn't the density of propane play a key role in this process too? This was a very interesting video, keep up the great work.
Great video grant!
Sounds like a sweet trick for stopping a pursuit.
I'm so glad he taught us how to make propane, now I can make my own as home and don't have to buy some at the store.
hey Grant. how about for Easter you could try hard boiled eggs in a vacuum and see if the shell cracks, also try coloring them in a vacuum to see if the dye penitrates the shell more effectively, and also I'm not sure if you did it last year but the golden eggs is a cool one where you spin a egg and change its direction suddenly mixing the yolk and whites of the egg within the shell.
hi, i`m an old disabled feild mechanic. I always had a 20 lb tank of propane and a blow torch for tank. torch had about a 10 ft hose and when not used to heat or burn i would use liquide propane to freeze shrink bearing races. This is known as cold welding. The race will only 1- 10,000 s bigger than hole it is to be installed in. remove old race, Put race in old cooler and take torch head off hose assembly, tilt tank upside down put hose in add,enough propane in to cover thickness of race, place race in liquid it will boil propane{bubbles} heat base where race must fit, it will expand a small bit then take frozen race that will have shrunk a small bit and drive in with tool, the heat exchange will mahe hole smaller and race bigger so cold welded.